Hello all, i have succesfully installed Xenomai 3.0.5 with linux 4.9.90, but I am having trouble installing RTnet on an i218-lm.
I followed these steps: 1) ifconfig eth0 down 2) rmmod e1000e 3) configured /usr/xenomai/etc/rtnet.conf according to https://gitlab.denx.de/Xenomai/xenomai/-/wikis/RTnet 4) modprobe rtpacket 5) modprobe rtnet 6) modprobe rt_e1000e But now if I try to run rtnet with ./rtnet start I get the following errors: ioctl: No such device ioctl: No such device ioctl: No such device ioctl: No such device ioctl (add): No such device ioctl (add): No such device ioctl (add): No such device ioctl (add): No such device vnic0: ERROR while getting interface flags: No such device SIOCSIFADDR: No such device vnic0: ERROR while getting interface flags: No such device SIOCSIFNETMASK: No such device Waiting for all slaves...ioctl: No such device ioctl: No such device ./rtifconfig only show the local loopback but not rteth0 Dmesg shows that rtnet and the driver are being loaded [ 391.184595] *** RTnet for Xenomai v3.0.5 *** [ 391.184596] RTnet: initialising real-time networking [ 400.034853] rt_e1000e: Intel(R) PRO/1000 Network Driver - 1.5.1-k-rt [ 400.034854] rt_e1000e: Copyright(c) 1999 - 2011 Intel Corporation. But with lspci -knn it shows that the NIC doesn't pick up the real time driver: 00:1f.6 Ethernet controller [0200]: Intel Corporation Ethernet Connection I219-LM [8086:156f] (rev 21) Subsystem: Gigabyte Technology Co., Ltd Ethernet Connection I219-LM [1458:e000] Kernel modules: e1000e Did I do something wrong or is my I219-LM NIC not supported by RTnet? Many Thanks Lennard Kloock
