Hi, i try to get RTnet up and running, but there are some issues with setup.
Two system are connected via a switch. Both have 2 network interface, Intel i210 and Intel 82574L. Only Intel i210 is used by Xenomai/ RTnet. One system is configured as master in 'rtnet.conf', the other one as a slave. If 'rtnet start' is executed following outputs appears. Master:
Waiting for all slaves...
Slave:
Stage 1: searching for master...
RT interface came up as 'rtifconfig' is shown, but both hang on there stages. At master the dmesg output are floated with messages like:
[ 323.903321] rt_igb: rteth0: Reset adapter [ 323.905082] TDMA: Failed to transmit sync frame! [ 323.910082] TDMA: Failed to transmit sync frame! [ 323.915083] TDMA: Failed to transmit sync frame! [ 323.920083] TDMA: Failed to transmit sync frame! [ 323.932087] RTcfg: error -11 while sending stage 1 frame
Anybody knows that error -11 means? I can't find any information on this error code. Thanks Benji
