Maybe you can help on this? -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of [EMAIL PROTECTED] Sent: Wednesday, January 22, 2003 17:02 To: [EMAIL PROTECTED] Subject: XFree86 configuration
While installing RH 8 I chose to "Skip X Configuration". After that I found that Xconfigurator has been replaced by redhat-config-xfree86. I ran that using --reconfig --noui and an XF86Config file was created but X refuses to start when given a "startx" command. The error is... Fatal server error: no screens found I don't see what is wrong in the config..... Anyone? -- http://www.shorewall.net/ for all your firewall needs
# XFree86 4 configuration created by pyxf86config Section "ServerLayout" Identifier "Default Layout" Screen 0 "Screen0" 0 0 InputDevice "Mouse0" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard" InputDevice "DevInputMice" "AlwaysCore" EndSection Section "Files" # RgbPath is the location of the RGB database. Note, this is the name of the # file minus the extension (like ".txt" or ".db"). There is normally # no need to change the default. # Multiple FontPath entries are allowed (they are concatenated together) # By default, Red Hat 6.0 and later now use a font server independent of # the X server to render fonts. RgbPath "/usr/X11R6/lib/X11/rgb" FontPath "unix/:7100" EndSection Section "Module" Load "dbe" Load "extmod" Load "fbdevhw" Load "glx" Load "record" Load "freetype" Load "type1" EndSection Section "InputDevice" # Specify which keyboard LEDs can be user-controlled (eg, with xset(1)) # Option "Xleds" "1 2 3" # To disable the XKEYBOARD extension, uncomment XkbDisable. # Option "XkbDisable" # To customise the XKB settings to suit your keyboard, modify the # lines below (which are the defaults). For example, for a non-U.S. # keyboard, you will probably want to use: # Option "XkbModel" "pc102" # If you have a US Microsoft Natural keyboard, you can use: # Option "XkbModel" "microsoft" # # Then to change the language, change the Layout setting. # For example, a german layout can be obtained with: # Option "XkbLayout" "de" # or: # Option "XkbLayout" "de" # Option "XkbVariant" "nodeadkeys" # # If you'd like to switch the positions of your capslock and # control keys, use: # Option "XkbOptions" "ctrl:swapcaps" # Or if you just want both to be control, use: # Option "XkbOptions" "ctrl:nocaps" # Identifier "Keyboard0" Driver "keyboard" Option "XkbRules" "xfree86" Option "XkbModel" "pc105" Option "XkbLayout" "us" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "PS/2" Option "Device" "/dev/psaux" Option "ZAxisMapping" "4 5" Option "Emulate3Buttons" "no" EndSection Section "InputDevice" # If the normal CorePointer mouse is not a USB mouse then # this input device can be used in AlwaysCore mode to let you # also use USB mice at the same time. Identifier "DevInputMice" Driver "mouse" Option "Protocol" "IMPS/2" Option "Device" "/dev/input/mice" Option "ZAxisMapping" "4 5" Option "Emulate3Buttons" "no" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Monitor Vendor" ModelName "VG800b" DisplaySize 360 290 HorizSync 30.0 - 82.0 VertRefresh 50.0 - 75.0 ModeLine "1400x1050" 129.0 1400 1464 1656 1960 1050 1051 1054 1100 +hsync +vsync ModeLine "1400x1050" 151.0 1400 1464 1656 1960 1050 1051 1054 1100 +hsync +vsync ModeLine "1400x1050" 162.0 1400 1464 1656 1960 1050 1051 1054 1100 +hsync +vsync ModeLine "1400x1050" 184.0 1400 1464 1656 1960 1050 1051 1054 1100 +hsync +vsync Option "dpms" EndSection Section "Device" Identifier "Videocard0" Driver "s3" VendorName "Videocard vendor" BoardName "S3 Trio64V2 (generic)" EndSection Section "Screen" Identifier "Screen0" Device "Videocard0" Monitor "Monitor0" DefaultDepth 16 SubSection "Display" Modes "800x600" EndSubSection SubSection "Display" Depth 16 Modes "800x600" "640x480" EndSubSection EndSection Section "DRI" Group 0 Mode 0666 EndSection
XFree86 Version 4.2.0 (Red Hat Linux release: 4.2.0-72) / X Window System (protocol Version 11, revision 0, vendor release 6600) Release Date: 23 January 2002 If the server is older than 6-12 months, or if your card is newer than the above date, look for a newer version before reporting problems. (See http://www.XFree86.Org/) Build Operating System: Linux 2.4.18-11smp i686 [ELF] Build Host: daffy.perf.redhat.com Module Loader present OS Kernel: Linux version 2.4.18-14 ([EMAIL PROTECTED]) (gcc version 3.2 20020903 (Red Hat Linux 8.0 3.2-7)) #1 Wed Sep 4 13:35:50 EDT 2002 Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/XFree86.0.log", Time: Wed Jan 22 16:59:37 2003 (==) Using config file: "/etc/X11/XF86Config" (==) ServerLayout "Default Layout" (**) |-->Screen "Screen0" (0) (**) | |-->Monitor "Monitor0" (**) | |-->Device "Videocard0" (**) |-->Input Device "Mouse0" (**) |-->Input Device "Keyboard0" (**) Option "XkbRules" "xfree86" (**) XKB: rules: "xfree86" (**) Option "XkbModel" "pc105" (**) XKB: model: "pc105" (**) Option "XkbLayout" "us" (**) XKB: layout: "us" (==) Keyboard: CustomKeycode disabled (**) |-->Input Device "DevInputMice" (**) FontPath set to "unix/:7100" (**) RgbPath set to "/usr/X11R6/lib/X11/rgb" (==) ModulePath set to "/usr/X11R6/lib/modules" (--) using VT number 7 (II) Open APM successful (II) Module ABI versions: XFree86 ANSI C Emulation: 0.1 XFree86 Video Driver: 0.5 XFree86 XInput driver : 0.3 XFree86 Server Extension : 0.1 XFree86 Font Renderer : 0.3 (II) Loader running on linux (II) LoadModule: "bitmap" (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor="The XFree86 Project" compiled for 4.2.0, module version = 1.0.0 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.3 (II) Loading font Bitmap (II) LoadModule: "pcidata" (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor="The XFree86 Project" compiled for 4.2.0, module version = 0.1.0 ABI class: XFree86 Video Driver, version 0.5 (II) PCI: Probing config type using method 1 (II) PCI: Config type is 1 (II) PCI: stages = 0x03, oldVal1 = 0x00000000, mode1Res1 = 0x80000000 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 8086,7180 card 0000,0000 rev 03 class 06,00,00 hdr 00 (II) PCI: 00:01:0: chip 8086,7181 card 0000,0000 rev 03 class 06,04,00 hdr 01 (II) PCI: 00:04:0: chip 8086,7110 card 0000,0000 rev 01 class 06,01,00 hdr 80 (II) PCI: 00:04:1: chip 8086,7111 card 0000,0000 rev 01 class 01,01,80 hdr 00 (II) PCI: 00:04:2: chip 8086,7112 card 0000,0000 rev 01 class 0c,03,00 hdr 00 (II) PCI: 00:04:3: chip 8086,7113 card 0000,0000 rev 01 class 06,80,00 hdr 00 (II) PCI: 00:09:0: chip 9004,8178 card 0000,0000 rev 00 class 01,00,00 hdr 00 (II) PCI: 00:0a:0: chip 1186,1300 card 1186,1303 rev 10 class 02,00,00 hdr 00 (II) PCI: 00:0c:0: chip 5333,8901 card 5333,8901 rev 16 class 03,00,00 hdr 00 (II) PCI: End of PCI scan (II) LoadModule: "scanpci" (II) Loading /usr/X11R6/lib/modules/libscanpci.a (II) Module scanpci: vendor="The XFree86 Project" compiled for 4.2.0, module version = 0.1.0 ABI class: XFree86 Video Driver, version 0.5 (II) UnloadModule: "scanpci" (II) Unloading /usr/X11R6/lib/modules/libscanpci.a (II) Host-to-PCI bridge: (II) PCI-to-ISA bridge: (II) PCI-to-PCI bridge: (II) Bus 0: bridge is at (0:0:0), (-1,0,0), BCTRL: 0x08 (VGA_EN is set) (II) Bus 0 I/O range: [0] -1 0x00000000 - 0x0000ffff (0x10000) IX[B] (II) Bus 0 non-prefetchable memory range: [0] -1 0x00000000 - 0xffffffff (0x0) MX[B] (II) Bus 0 prefetchable memory range: [0] -1 0x00000000 - 0xffffffff (0x0) MX[B] (II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x01 (VGA_EN is cleared) (II) Bus 1 I/O range: (II) Bus 1 non-prefetchable memory range: (II) Bus 1 prefetchable memory range: (II) Bus -1: bridge is at (0:4:0), (0,-1,0), BCTRL: 0x08 (VGA_EN is set) (II) Bus -1 I/O range: (II) Bus -1 non-prefetchable memory range: (II) Bus -1 prefetchable memory range: (--) PCI:*(0:12:0) S3 Trio64V2/DX or /GX rev 22, Mem @ 0xdc000000/26 (II) Addressable bus resource ranges are [0] -1 0x00000000 - 0xffffffff (0x0) MX[B] [1] -1 0x00000000 - 0x0000ffff (0x10000) IX[B] (II) OS-reported resource ranges: [0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0x0000ffff - 0x0000ffff (0x1) IX[B] [6] -1 0x00000000 - 0x000000ff (0x100) IX[B] (II) Active PCI resource ranges: [0] -1 0xe2800000 - 0xe28000ff (0x100) MX[B] [1] -1 0xe3000000 - 0xe3000fff (0x1000) MX[B] [2] -1 0xe4000000 - 0xe7ffffff (0x4000000) MX[B] [3] -1 0xdc000000 - 0xdfffffff (0x4000000) MX[B](B) [4] -1 0x0000b800 - 0x0000b8ff (0x100) IX[B] [5] -1 0x0000d000 - 0x0000d0ff (0x100) IX[B] [6] -1 0x0000d400 - 0x0000d41f (0x20) IX[B] [7] -1 0x0000d800 - 0x0000d80f (0x10) IX[B] (II) Active PCI resource ranges after removing overlaps: [0] -1 0xe2800000 - 0xe28000ff (0x100) MX[B] [1] -1 0xe3000000 - 0xe3000fff (0x1000) MX[B] [2] -1 0xe4000000 - 0xe7ffffff (0x4000000) MX[B] [3] -1 0xdc000000 - 0xdfffffff (0x4000000) MX[B](B) [4] -1 0x0000b800 - 0x0000b8ff (0x100) IX[B] [5] -1 0x0000d000 - 0x0000d0ff (0x100) IX[B] [6] -1 0x0000d400 - 0x0000d41f (0x20) IX[B] [7] -1 0x0000d800 - 0x0000d80f (0x10) IX[B] (II) OS-reported resource ranges after removing overlaps with PCI: [0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0x0000ffff - 0x0000ffff (0x1) IX[B] [6] -1 0x00000000 - 0x000000ff (0x100) IX[B] (II) All system resource ranges: [0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0xe2800000 - 0xe28000ff (0x100) MX[B] [6] -1 0xe3000000 - 0xe3000fff (0x1000) MX[B] [7] -1 0xe4000000 - 0xe7ffffff (0x4000000) MX[B] [8] -1 0xdc000000 - 0xdfffffff (0x4000000) MX[B](B) [9] -1 0x0000ffff - 0x0000ffff (0x1) IX[B] [10] -1 0x00000000 - 0x000000ff (0x100) IX[B] [11] -1 0x0000b800 - 0x0000b8ff (0x100) IX[B] [12] -1 0x0000d000 - 0x0000d0ff (0x100) IX[B] [13] -1 0x0000d400 - 0x0000d41f (0x20) IX[B] [14] -1 0x0000d800 - 0x0000d80f (0x10) IX[B] (II) LoadModule: "dbe" (II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a (II) Module dbe: vendor="The XFree86 Project" compiled for 4.2.0, module version = 1.0.0 Module class: XFree86 Server Extension ABI class: XFree86 Server Extension, version 0.1 (II) Loading extension DOUBLE-BUFFER (II) LoadModule: "extmod" (II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a (II) Module extmod: vendor="The XFree86 Project" compiled for 4.2.0, module version = 1.0.0 Module class: XFree86 Server Extension ABI class: XFree86 Server Extension, version 0.1 (II) Loading extension SHAPE (II) Loading extension MIT-SUNDRY-NONSTANDARD (II) Loading extension BIG-REQUESTS (II) Loading extension SYNC (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XC-MISC (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-Misc (II) Loading extension XFree86-DGA (II) Loading extension DPMS (II) Loading extension FontCache (II) Loading extension TOG-CUP (II) Loading extension Extended-Visual-Information (II) Loading extension XVideo (II) Loading extension XVideo-MotionCompensation (II) Loading extension X-Resource (II) LoadModule: "fbdevhw" (II) Loading /usr/X11R6/lib/modules/linux/libfbdevhw.a (II) Module fbdevhw: vendor="The XFree86 Project" compiled for 4.2.0, module version = 0.0.2 ABI class: XFree86 Video Driver, version 0.5 (II) LoadModule: "glx" (II) Loading /usr/X11R6/lib/modules/extensions/libglx.a (II) Module glx: vendor="The XFree86 Project" compiled for 4.2.0, module version = 1.0.0 ABI class: XFree86 Server Extension, version 0.1 (II) Loading sub module "GLcore" (II) LoadModule: "GLcore" (II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a (II) Module GLcore: vendor="The XFree86 Project" compiled for 4.2.0, module version = 1.0.0 ABI class: XFree86 Server Extension, version 0.1 (II) Loading extension GLX (II) LoadModule: "record" (II) Loading /usr/X11R6/lib/modules/extensions/librecord.a (II) Module record: vendor="The XFree86 Project" compiled for 4.2.0, module version = 1.13.0 Module class: XFree86 Server Extension ABI class: XFree86 Server Extension, version 0.1 (II) Loading extension RECORD (II) LoadModule: "freetype" (II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a (II) Module freetype: vendor="The XFree86 Project" compiled for 4.2.0, module version = 1.1.10 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.3 (II) Loading font FreeType (II) LoadModule: "type1" (II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a (II) Module type1: vendor="The XFree86 Project" compiled for 4.2.0, module version = 1.0.1 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.3 (II) Loading font Type1 (II) Loading font CID (II) LoadModule: "s3" (II) Loading /usr/X11R6/lib/modules/drivers/s3_drv.o (II) Module s3: vendor="The XFree86 Project" compiled for 4.2.0, module version = 0.3.5 Module class: XFree86 Video Driver ABI class: XFree86 Video Driver, version 0.5 (II) LoadModule: "mouse" (II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o (II) Module mouse: vendor="The XFree86 Project" compiled for 4.2.0, module version = 1.0.0 Module class: XFree86 XInput Driver ABI class: XFree86 XInput driver, version 0.3 (II) S3: driver (version 0.3.5 for S3 chipset: 964-0, 964-1, 968, Trio32/64, Aurora64V+ (II) Primary Device is: PCI 00:0c:0 (--) Assigning device section with no busID to primary device (EE) No devices detected. Fatal server error: no screens found When reporting a problem related to a server crash, please send the full server output, not just the last messages. This can be found in the log file "/var/log/XFree86.0.log". Please report problems to [EMAIL PROTECTED]
XFree86 Version 4.2.0 (Red Hat Linux release: 4.2.0-72) / X Window System (protocol Version 11, revision 0, vendor release 6600) Release Date: 23 January 2002 If the server is older than 6-12 months, or if your card is newer than the above date, look for a newer version before reporting problems. (See http://www.XFree86.Org/) Build Operating System: Linux 2.4.18-11smp i686 [ELF] Build Host: daffy.perf.redhat.com Module Loader present OS Kernel: Linux version 2.4.18-14 ([EMAIL PROTECTED]) (gcc version 3.2 20020903 (Red Hat Linux 8.0 3.2-7)) #1 Wed Sep 4 13:35:50 EDT 2002 Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (++) Log file: "/dev/null", Time: Wed Jan 22 17:02:37 2003 (++) Using config file: "[EMAIL PROTECTED]" (EE) No devices detected. Fatal server error: no screens found When reporting a problem related to a server crash, please send the full server output, not just the last messages. This can be found in the log file "/dev/null". Please report problems to [EMAIL PROTECTED]