have you tried the older 3.3.6 Server ?
S3
- 3.3.6:
-
Support (accelerated) for the S3 911, 924, 801, 805, 928, 864, 868, 964, 968, Trio32, Trio64, Trio64V+, Trio64UV+, Aurora64V+, Trio64V2, and PLATO/PX is provided by the XF86_S3 server and the XF86_SVGA server with the s3_svga driver. Support (accelerated) for the ViRGE, ViRGE/VX, ViRGE/DX, ViRGE/GX, ViRGE/GX2, ViRGE/MX, ViRGE/MX+ is provided by the XF86_S3V server. Support (accelerated) for the ViRGE chipsets, as well as the Trio3D and Trio3D/2X, is provided by the XF86_SVGA server with the s3v driver. Support (accelerated) for the Savage3D, Savage3D/MV, Savage4, and Savage2000, is provided by the XF86_SVGA server with the s3_savage driver on some OSes (Linux, *BSD).
- 4.2.1:
-
Support (accelerated) for the 964 (revisions 0 and 1), 968, Trio32, Trio64, Trio64, Trio64V+, Trio64UV+, Aurora64V+, Trio64V2, and PLATO/PX is provided by the "s3" driver (however, only models using the IBM RGB 524, Texas Instruments 3025, or an internal TrioDAC RAMDAC chip are supported). Support (accelerated) for the ViRGE, ViRGE/VX, ViRGE/DX, ViRGE/GX, ViRGE/GX2, ViRGE/MX, ViRGE/MX+, Trio3D and Trio3D/2X is provided by the "s3virge" driver. Support (accelerated) for the Savage3D, Savage3D/MV, Savage4, Savage2000, and SuperSavage, is provided by the "savage" driver. Support for the other S3 chipsets has not yet been ported.
- Summary:
-
All hardware supported in 3.3.6 is also supported in 4.2.1 except for the 911, 924, 801, 805, 928, 864, and 868, and versions of the 964 and 968 that do not use the RAMDAC chips listed above. The SuperSavage chipset is supported only in 4.2.1.
WADE SCHOFIELD wrote:
Hello, I am attempting to run X on my RH 7.3 installation with no luck. What is strange is that the same hardware ran X under 7.2 flawlessly! Also, I used the graphical install and went through the X setup with no errors. I have tried everything I know even copying the old XF86Config from the 7.2 installation with no success.I am running an old system (PII 166) with an S3 video card. Any assistance would be greatly appreciated. Sincerely, Wade Schofield XFree86.0.log: XFree86 Version 4.2.0 (Red Hat Linux release: 4.2.0-8) / X Window System (protocol Version 11, revision 0, vendor release 6600) Release Date: 23 January 2002 If the server is older than 6-12 months, or if your card is newer than the above date, look for a newer version before reporting problems. (See http://www.XFree86.Org/) Build Operating System: Linux 2.4.17-0.13smp i686 [ELF] Build Host: daffy.perf.redhat.com Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/XFree86.0.log", Time: Mon Jan 20 20:34:36 2003 (==) Using config file: "/etc/X11/XF86Config" Parse warning on line 102 of section Keyboard in file /etc/X11/XF86Config Ignoring obsolete keyword "LeftAlt". Parse error on line 102 of section Keyboard in file /etc/X11/XF86Config "Meta" is not a valid keyword in this section. (EE) Problem parsing the config file (EE) Error from xf86HandleConfigFile() Fatal server error: no screens found When reporting a problem related to a server crash, please send the full server output, not just the last messages. This can be found in the log file "/var/log/XFree86.0.log". Please report problems to [EMAIL PROTECTED]. _______________________________________________ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86 -----Original Message----- From: Simon Westerby [mailto:[EMAIL PROTECTED]] Sent: Monday, January 27, 2003 1:32 PM To: [EMAIL PROTECTED] Subject: Re: [XFree86] Is this working? You need 4.2.99.4 as the INtel 845 chipset is not supported in 4.2.1 WADE SCHOFIELD wrote:I've sent in a couple of help requests and haven't received a reply or seen my message so up in list. Would someone please reply to this so I know it's working! Thanks, ws -----Original Message----- From: vishnu devineni [mailto:[EMAIL PROTECTED]] Sent: Monday, January 27, 2003 2:25 AM To: [EMAIL PROTECTED] Subject: [XFree86] startx not running hi my computer has intel D845GLLY motherboard with built in graphics card. log file is attached ________________________________________________________________________ Missed your favourite TV serial last night? Try the new, Yahoo! TV. visit http://in.tv.yahoo.com _______________________________________________ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86_______________________________________________ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86 _______________________________________________ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86