Hi,
This is my first mail to this list. Hope somebody can help me. I couldn't receive any help from 3 other lists. I've a set of problems, which i guess are related.
I use Suse 8.1 with XFree86 4.2.0, on an IBM Netvista machine. It has
Intel 82810a graphic controller chipset on it. The problems are explained
below. I also included parts from Sax.log & XFree86.0.log at the bottom.
TIA,
1.
When i try to make a Sax config, Sax sees my monitor & video card
undefined. When i click Finalize at Sax, it says :
(EE) Problem parsing the config file
(EE) Error from xf86HandleConfigFile()
I get this error everytime, even if i do no modification.
2.
When i start KWinTV, these errors occur :
WARNING: Your X-Server has no DGA support.
WARNING: couldn't find framebuffer base address, try manual
configuration ("v4l-conf -a <addr>")
I can scan & find channels, i can hear sounds correctly, but can only see
a black screen on each.
3.
With xawtv, it's the same. Sounds ok, but screens not. Xawtv gives these
errors :
This is xawtv-3.76, running on Linux/i686 (2.4.19-4GB)
WARNING: Your X-Server has no DGA support.
WARNING: couldn't find framebuffer base address, try manual
configuration ("v4l-conf -a <addr>")
/root/.xawtv:15: syntax error
config: invalid value for input: (null)
valid choices for "input": "Television", "Composite1", "S-Video"
ioctl: VIDIOCCAPTURE(on): Invalid argument
ioctl: VIDIOCCAPTURE(off): Invalid argument
4.
I try v4l-config to solve this framebuffer thing, but it gives these
errors :
v4l-conf: using X11 display :0.0
WARNING: Your X-Server has no DGA support.
mode: 1024x768, depth=24, bpp=32, bpl=4096, base=unknown
/dev/video0 [v4l2]: ioctl VIDIOC_QUERYCAP: Invalid argument
WARNING: couldn't find framebuffer base address, try manual
configuration ("v4l-conf -a <addr>")
/dev/video0 [v4l]: configuration done
>From SaX log :
(++) Using config file: "/var/cache/sax/files/XF86Config"
Data incomplete in file /var/cache/sax/files/XF86Config
Undefined InputDevice "Keyboard[0]" referenced by
ServerLayout "Layout[all]".
(EE) Problem parsing the config file
(EE) Error from xf86HandleConfigFile()
Fatal server error:
no screens found
When reporting a problem related to a server crash, please send
the full server output, not just the last messages.
This can be found in the log file "/var/log/XFree86.99.0.log".
Please report problems to [EMAIL PROTECTED]
]
30-Jan 22:38:35 <I> qx: command returned (null) string
Data incomplete in file /tmp/isax-14920/XF86Config
Undefined InputDevice "Keyboard[0]" referenced by ServerLayout
"Layout[all]".
Problem when parsing config file
.....
.....
>From XFree96.0.log :
ABI class: XFree86 XInput driver, version 0.3
(II) I810: Driver for Intel i810 chipset: i810, i810-dc100, i810e, i815,
i830M, 845G
(II) Primary Device is: PCI 00:01:0
(--) Assigning device section with no busID to primary device
(--) Chipset i810e found
.....
.....
(**) I810(0): Depth 24, (--) framebuffer bpp 24
(==) I810(0): RGB weight 888
(==) I810(0): Default visual is TrueColor
.....
.....
(II) I810(0): e74: Using vrefresh range of 50.00-120.00 Hz
(II) I810(0): Clock range: 12.00 to 136.00 MHz
(II) I810(0): Not using default mode "320x175" (bad mode
clock/interlace/doublescan)
.....
.....
(II) I810(0): Not using default mode "1024x768" (unknown reason)
(II) I810(0): Not using default mode "512x384" (bad mode
clock/interlace/doublescan)
.....
.....
(II) I810(0): Not using default mode "1280x1024" (hsync out of range)
.....
.....
(--) I810(0): Virtual size is 1024x768 (pitch 1024)
(**) I810(0): Default mode "1024x768": 94.5 MHz, 68.7 kHz, 85.0 Hz
(II) I810(0): Modeline "1024x768" 94.50 1024 1072 1168 1376 768 769
772 808 +hsync +vsync
(**) I810(0): Default mode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz
(II) I810(0): Modeline "800x600" 56.30 800 832 896 1048 600 601 604
631 +hsync +vsync
(**) I810(0): Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz
(II) I810(0): Modeline "640x480" 36.00 640 696 752 832 480 481 484 509
-hsync -vsync
(--) I810(0): Display dimensions: (320, 240) mm
(--) I810(0): DPI set to (81, 81)
.....
.....
