I am coming in here late, what does XF86Config file 'screen' section say? This is a laptop? I assummed from your /var/log/XFree86.0.log file you were using the 'radeon' driver. You can of course try it. i see from this file :(XFree86.0.log), "XF86Config.new log" ----> II) RADEON(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000 (II) RADEON(0): PCI bus 1 card 0 func 0 (==) RADEON(0): Depth 8, (==) framebuffer bpp 8 (II) RADEON(0): Pixel depth = 8 bits stored in 1 byte (8 bpp pixmaps) (==) RADEON(0): Default visual is PseudoColor (II) RADEON(0): Using 8 bits per RGB (8 bit DAC) ---> you set this to run in 'Default Depth 8'? -Mel
On Thu, 2003-02-20 at 15:37, David Brownlee wrote: > On Thu, 20 Feb 2003, mel kravitz wrote: > > > Did you try the 'ati' driver? > > The 'radeon' driver may have problems reading the cards i2c data. > > I think its already doing that - the generated XF86Config lists it > as using the ati driver: > > Driver "ati" > VendorName "ATI Technologies Inc" > BoardName "Radeon R250 Lf [Radeon Mobility 9000]" > BusID "PCI:1:0:0" > > Though the last line of the log worries me a little: > > (II) RADEON(0): Panel Size from BIOS: 65535x65535 > > > > > -- > David Brownlee - CTO Purple Interactive - (0)20 8742 8880 _______________________________________________ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
