Hello, I have a machine running FreeBSD 4.7-RELEASE and XFree86 4.3.0 equipped with an ATI Radeon 9700 (R300), which is attached to a Dell 1702FP flat panel monitor via DVI. Console text mode works fine (and graphic mode under Windows), but I cannot get XFree86 working using the DVI output. Just after firing up X, the DVI output is disabled; if I attach the monitor to the VGA output, however, I can see the image.
These are the relevant lines from the scanpci output: pci bus 0x0001 cardnum 0x00 function 0x00: vendor 0x1002 device 0x4e45 ATI Technologies Inc Radeon R300 NE [Radeon 9700] pci bus 0x0001 cardnum 0x00 function 0x01: vendor 0x1002 device 0x4e65 ATI Technologies Inc Radeon R300 [Radeon 9700] (Secondary) I found something strange in /var/log/XFree86.0.log (attached): (II) Primary Device is: PCI 01:00:0 (II) ATI: Candidate "Device" section "Card0". (WW) ATI: PCI/AGP Mach64 in slot 1:0:1 could not be detected! (WW) RADEON: No matching Device section for instance (BusID PCI:1:0:1) found (--) Chipset ATI Radeon 9700/9500Pro NE (AGP) found I tried to add another Device section named "Card1", with BusID PCI:1:0:1 and same driver, to no avail. Also, I am wondering about these messages: (II) RADEON(0): CloneDisplay option not set -- defaulting to auto-detect (II) RADEON(0): Primary Display == Type 3 I also tried to set CloneDisplay to "0" and "2". No change. Any ideas? Thanks, JMA -- ***** Jose M. Alcaide // [EMAIL PROTECTED] // [EMAIL PROTECTED] ***** ***** "Go ahead... make my day" -- Harry Callahan ***** _______________________________________________ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
