Below is the /var/log/XFree86.0.log output from a problem I've been
having. I've tried several different configurations. If I set this up
with only Screen0 (and required parts for that), XF86 runs fine.
However, adding any or all of the other screens in causes the server to
crash or hang the box totally. The consistent error I see is " Fatal
server error:
Inconsistent display bitmapScanlineUnit. Exiting". Any input on how to
configure this correctly across heterogeneous cards and monitors is
appreciated.
Mark
XFree86 Version 4.2.1 / X Window System
(protocol Version 11, revision 0, vendor release 6600)
Release Date: 3 September 2002
If the server is older than 6-12 months, or if your card is
newer than the above date, look for a newer version before
reporting problems. (See http://www.XFree86.Org/)
Build Operating System: FreeBSD 5.0-RC i386 [ELF]
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Thu Apr 3 09:52:12 2003
(==) Using config file: "/root/XF86Config"
(==) ServerLayout "XFree86 Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) |-->Screen "Screen1" (1)
(**) | |-->Monitor "Monitor1"
(**) | |-->Device "Card1"
(**) |-->Screen "Screen2" (2)
(**) | |-->Monitor "Monitor2"
(**) | |-->Device "Card2"
(**) |-->Screen "Screen3" (3)
(**) | |-->Monitor "Monitor3"
(**) | |-->Device "Card3"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(==) Keyboard: CustomKeycode disabled
(**) FontPath set to
"/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X1
1R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/
X11/fonts/100dpi/"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(**) ModulePath set to "/usr/X11R6/lib/modules"
(--) Using syscons driver with X support (version 2.0)
(--) using VT number 9
(II) Module ABI versions:
XFree86 ANSI C Emulation: 0.1
XFree86 Video Driver: 0.5
XFree86 XInput driver : 0.3
XFree86 Server Extension : 0.1
XFree86 Font Renderer : 0.3
(II) Loader running on freebsd
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.3
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.5
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x00000000, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,1250 card 0000,0000 rev 03 class 06,00,00
hdr 00
(II) PCI: 00:07:0: chip 8086,7000 card 0000,0000 rev 01 class 06,01,00
hdr 80
(II) PCI: 00:07:1: chip 8086,7010 card 0000,0000 rev 00 class 01,01,80
hdr 00
(II) PCI: 00:0d:0: chip 1002,4354 card 0000,0000 rev 09 class 03,00,00
hdr 00
(II) PCI: 00:0e:0: chip 1002,4354 card 0000,0000 rev 09 class 03,00,00
hdr 00
(II) PCI: 00:0f:0: chip 1002,4354 card 0000,0000 rev 09 class 03,00,00
hdr 00
(II) PCI: 00:10:0: chip 1023,9880 card 1b13,9880 rev 3a class 03,00,00
hdr 00
(II) PCI: End of PCI scan
(II) LoadModule: "scanpci"
(II) Loading /usr/X11R6/lib/modules/libscanpci.a
(II) Module scanpci: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.5
(II) UnloadModule: "scanpci"
(II) Unloading /usr/X11R6/lib/modules/libscanpci.a
(II) Host-to-PCI bridge:
(II) PCI-to-ISA bridge:
(II) Bus 0: bridge is at (0:0:0), (-1,0,0), BCTRL: 0x08 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus -1: bridge is at (0:7:0), (0,-1,0), BCTRL: 0x08 (VGA_EN is set)
(II) Bus -1 I/O range:
(II) Bus -1 non-prefetchable memory range:
(II) Bus -1 prefetchable memory range:
(--) PCI: (0:13:0) ATI Mach64 CT rev 9, Mem @ 0xf9000000/24, BIOS @
0xfff50000/16
(--) PCI: (0:14:0) ATI Mach64 CT rev 9, Mem @ 0xfa000000/24, BIOS @
0xfff60000/16
(--) PCI: (0:15:0) ATI Mach64 CT rev 9, Mem @ 0xfb000000/24, BIOS @
0xfff70000/16
(--) PCI:*(0:16:0) Trident Blade3D rev 58, Mem @ 0xff000000/23,
0xffbc0000/17, 0xfe000000/23
(II) Addressable bus resource ranges are
[0] -1 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0x00000000 - 0x000000ff (0x100) IX[B]
(II) Active PCI resource ranges:
[0] -1 0xfe000000 - 0xfe7fffff (0x800000) MX[B](B)
[1] -1 0xffbc0000 - 0xffbdffff (0x20000) MX[B](B)
[2] -1 0xff000000 - 0xff7fffff (0x800000) MX[B](B)
[3] -1 0xfff70000 - 0xfff7ffff (0x10000) MX[B](B)
[4] -1 0xfb000000 - 0xfbffffff (0x1000000) MX[B](B)
[5] -1 0xfff60000 - 0xfff6ffff (0x10000) MX[B](B)
[6] -1 0xfa000000 - 0xfaffffff (0x1000000) MX[B](B)
[7] -1 0xfff50000 - 0xfff5ffff (0x10000) MX[B](B)
[8] -1 0xf9000000 - 0xf9ffffff (0x1000000) MX[B](B)
[9] -1 0x0000ffa0 - 0x0000ffbf (0x20) IX[B]E
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0xfe000000 - 0xfe7fffff (0x800000) MX[B](B)
[1] -1 0xffbc0000 - 0xffbdffff (0x20000) MX[B](B)
[2] -1 0xff000000 - 0xff7fffff (0x800000) MX[B](B)
[3] -1 0xfff70000 - 0xfff7ffff (0x10000) MX[B](B)
[4] -1 0xfb000000 - 0xfbffffff (0x1000000) MX[B](B)
[5] -1 0xfff60000 - 0xfff6ffff (0x10000) MX[B](B)
[6] -1 0xfa000000 - 0xfaffffff (0x1000000) MX[B](B)
[7] -1 0xfff50000 - 0xfff5ffff (0x10000) MX[B](B)
[8] -1 0xf9000000 - 0xf9ffffff (0x1000000) MX[B](B)
[9] -1 0x0000ffa0 - 0x0000ffbf (0x20) IX[B]E
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0xffe00000 - 0xffefffff (0x100000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0xffe00000 - 0xffefffff (0x100000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0xfe000000 - 0xfe7fffff (0x800000) MX[B](B)
[6] -1 0xffbc0000 - 0xffbdffff (0x20000) MX[B](B)
[7] -1 0xff000000 - 0xff7fffff (0x800000) MX[B](B)
[8] -1 0xfff70000 - 0xfff7ffff (0x10000) MX[B](B)
[9] -1 0xfb000000 - 0xfbffffff (0x1000000) MX[B](B)
[10] -1 0xfff60000 - 0xfff6ffff (0x10000) MX[B](B)
[11] -1 0xfa000000 - 0xfaffffff (0x1000000) MX[B](B)
[12] -1 0xfff50000 - 0xfff5ffff (0x10000) MX[B](B)
[13] -1 0xf9000000 - 0xf9ffffff (0x1000000) MX[B](B)
[14] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[15] -1 0x00000000 - 0x000000ff (0x100) IX[B]
[16] -1 0x0000ffa0 - 0x0000ffbf (0x20) IX[B]E
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "dri"
(II) Loading /usr/X11R6/lib/modules/extensions/libdri.a
(II) Module dri: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.1
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/X11R6/lib/modules/freebsd/libdrm.a
(II) Module drm: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension XFree86-DRI
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
(II) Module glx: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.1
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Module GLcore: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension GLX
(II) LoadModule: "pex5"
(II) Loading /usr/X11R6/lib/modules/extensions/libpex5.a
(II) Module pex5: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension X3D-PEX
(II) LoadModule: "record"
(II) Loading /usr/X11R6/lib/modules/extensions/librecord.a
(II) Module record: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.13.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension RECORD
(II) LoadModule: "xie"
(II) Loading /usr/X11R6/lib/modules/extensions/libxie.a
(II) Module xie: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension XIE
(II) LoadModule: "xtrap"
(II) Loading /usr/X11R6/lib/modules/extensions/libxtrap.a
(II) Module xtrap: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension DEC-XTRAP
(II) LoadModule: "speedo"
(II) Loading /usr/X11R6/lib/modules/fonts/libspeedo.a
(II) Module speedo: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.1
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.3
(II) Loading font Speedo
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.1
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.3
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "vga"
(II) Loading /usr/X11R6/lib/modules/drivers/vga_drv.o
(II) Module vga: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 4.0.0
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.5
(II) LoadModule: "ati"
(II) Loading /usr/X11R6/lib/modules/drivers/ati_drv.o
(II) Module ati: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 6.4.8
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.5
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
Module class: XFree86 XInput Driver
ABI class: XFree86 XInput driver, version 0.3
(II) VGA: Generic VGA driver (version 4.0) for chipsets: generic
(II) ATI: ATI driver (version 6.4.8) for chipsets: ati, ativga
(II) R128: Driver for ATI Rage 128 chipsets: ATI Rage 128 RE (PCI),
ATI Rage 128 RF (AGP), ATI Rage 128 RG (AGP), ATI Rage 128 RK
(PCI),
ATI Rage 128 RL (AGP), ATI Rage 128 SM (AGP),
ATI Rage 128 Pro PD (PCI), ATI Rage 128 Pro PF (AGP),
ATI Rage 128 Pro PP (PCI), ATI Rage 128 Pro PR (PCI),
ATI Rage 128 Pro ULTRA TF (AGP), ATI Rage 128 Pro ULTRA TL
(AGP),
ATI Rage 128 Pro ULTRA TR (AGP), ATI Rage 128 Mobility LE (PCI),
ATI Rage 128 Mobility LF (AGP), ATI Rage 128 Mobility MF (AGP),
ATI Rage 128 Mobility ML (AGP)
(II) RADEON: Driver for ATI Radeon chipsets: ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI Radeon VE QY (AGP), ATI Radeon VE QZ (AGP),
ATI Radeon Mobility LW (AGP), ATI Radeon Mobility LY (AGP),
ATI Radeon Mobility LZ (AGP), ATI Radeon 8500 QL (AGP),
ATI Radeon 8500 QN (AGP), ATI Radeon 8500 QO (AGP),
ATI Radeon 8500 Ql (AGP), ATI Radeon 8500 BB (AGP),
ATI Radeon 7500 QW (AGP)
(II) Primary Device is: PCI 00:10:0
(WW) VGA: No matching Device section for instance (BusID PCI:0:13:0)
found
(WW) VGA: No matching Device section for instance (BusID PCI:0:14:0)
found
(WW) VGA: No matching Device section for instance (BusID PCI:0:15:0)
found
(--) Chipset generic found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0xffe00000 - 0xffefffff (0x100000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0xfe000000 - 0xfe7fffff (0x800000) MX[B](B)
[6] -1 0xffbc0000 - 0xffbdffff (0x20000) MX[B](B)
[7] -1 0xff000000 - 0xff7fffff (0x800000) MX[B](B)
[8] -1 0xfff70000 - 0xfff7ffff (0x10000) MX[B](B)
[9] -1 0xfb000000 - 0xfbffffff (0x1000000) MX[B](B)
[10] -1 0xfff60000 - 0xfff6ffff (0x10000) MX[B](B)
[11] -1 0xfa000000 - 0xfaffffff (0x1000000) MX[B](B)
[12] -1 0xfff50000 - 0xfff5ffff (0x10000) MX[B](B)
[13] -1 0xf9000000 - 0xf9ffffff (0x1000000) MX[B](B)
[14] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[15] -1 0x00000000 - 0x000000ff (0x100) IX[B]
[16] -1 0x0000ffa0 - 0x0000ffbf (0x20) IX[B]E
(II) ATI: Candidate "Device" section "Card1".
(II) ATI: Candidate "Device" section "Card2".
(II) ATI: Candidate "Device" section "Card3".
(II) ATI: Shared PCI Mach64 in slot 0:13:0 with sparse PIO base 0x02EC
detected.
(II) ATI: Shared PCI Mach64 in slot 0:14:0 with sparse PIO base 0x02EC
detected.
(II) ATI: Shared PCI Mach64 in slot 0:15:0 with sparse PIO base 0x02EC
detected.
(II) ATI: Shared PCI Mach64 in slot 0:13:0 assigned to active "Device"
section "Card1".
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0xffe00000 - 0xffefffff (0x100000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0xfe000000 - 0xfe7fffff (0x800000) MX[B](B)
[6] -1 0xffbc0000 - 0xffbdffff (0x20000) MX[B](B)
[7] -1 0xff000000 - 0xff7fffff (0x800000) MX[B](B)
[8] -1 0xfff70000 - 0xfff7ffff (0x10000) MX[B](B)
[9] -1 0xfb000000 - 0xfbffffff (0x1000000) MX[B](B)
[10] -1 0xfff60000 - 0xfff6ffff (0x10000) MX[B](B)
[11] -1 0xfa000000 - 0xfaffffff (0x1000000) MX[B](B)
[12] -1 0xfff50000 - 0xfff5ffff (0x10000) MX[B](B)
[13] -1 0xf9000000 - 0xf9ffffff (0x1000000) MX[B](B)
[14] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[15] -1 0x00000000 - 0x000000ff (0x100) IX[B]
[16] -1 0x0000ffa0 - 0x0000ffbf (0x20) IX[B]E
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0xffe00000 - 0xffefffff (0x100000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0xfe000000 - 0xfe7fffff (0x800000) MX[B](B)
[6] -1 0xffbc0000 - 0xffbdffff (0x20000) MX[B](B)
[7] -1 0xff000000 - 0xff7fffff (0x800000) MX[B](B)
[8] -1 0xfff70000 - 0xfff7ffff (0x10000) MX[B](B)
[9] -1 0xfb000000 - 0xfbffffff (0x1000000) MX[B](B)
[10] -1 0xfff60000 - 0xfff6ffff (0x10000) MX[B](B)
[11] -1 0xfa000000 - 0xfaffffff (0x1000000) MX[B](B)
[12] -1 0xfff50000 - 0xfff5ffff (0x10000) MX[B](B)
[13] -1 0xf9000000 - 0xf9ffffff (0x1000000) MX[B](B)
[14] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[15] -1 0x00000000 - 0x000000ff (0x100) IX[B]
[16] -1 0x0000ffa0 - 0x0000ffbf (0x20) IX[B]E
(II) Loading sub module "atimisc"
(II) LoadModule: "atimisc"
(II) Loading /usr/X11R6/lib/modules/drivers/atimisc_drv.o
(II) Module atimisc: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 6.4.8
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.5
(II) ATI: Shared PCI Mach64 in slot 0:14:0 assigned to active "Device"
section "Card2".
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0xffe00000 - 0xffefffff (0x100000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0xfe000000 - 0xfe7fffff (0x800000) MX[B](B)
[6] -1 0xffbc0000 - 0xffbdffff (0x20000) MX[B](B)
[7] -1 0xff000000 - 0xff7fffff (0x800000) MX[B](B)
[8] -1 0xfff70000 - 0xfff7ffff (0x10000) MX[B](B)
[9] -1 0xfb000000 - 0xfbffffff (0x1000000) MX[B](B)
[10] -1 0xfff60000 - 0xfff6ffff (0x10000) MX[B](B)
[11] -1 0xfa000000 - 0xfaffffff (0x1000000) MX[B](B)
[12] -1 0xfff50000 - 0xfff5ffff (0x10000) MX[B](B)
[13] -1 0xf9000000 - 0xf9ffffff (0x1000000) MX[B](B)
[14] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[15] -1 0x00000000 - 0x000000ff (0x100) IX[B]
[16] -1 0x0000ffa0 - 0x0000ffbf (0x20) IX[B]E
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0xffe00000 - 0xffefffff (0x100000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0xfe000000 - 0xfe7fffff (0x800000) MX[B](B)
[6] -1 0xffbc0000 - 0xffbdffff (0x20000) MX[B](B)
[7] -1 0xff000000 - 0xff7fffff (0x800000) MX[B](B)
[8] -1 0xfff70000 - 0xfff7ffff (0x10000) MX[B](B)
[9] -1 0xfb000000 - 0xfbffffff (0x1000000) MX[B](B)
[10] -1 0xfff60000 - 0xfff6ffff (0x10000) MX[B](B)
[11] -1 0xfa000000 - 0xfaffffff (0x1000000) MX[B](B)
[12] -1 0xfff50000 - 0xfff5ffff (0x10000) MX[B](B)
[13] -1 0xf9000000 - 0xf9ffffff (0x1000000) MX[B](B)
[14] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[15] -1 0x00000000 - 0x000000ff (0x100) IX[B]
[16] -1 0x0000ffa0 - 0x0000ffbf (0x20) IX[B]E
(II) Loading sub module "atimisc"
(II) LoadModule: "atimisc"
(II) Reloading /usr/X11R6/lib/modules/drivers/atimisc_drv.o
(II) ATI: Shared PCI Mach64 in slot 0:15:0 assigned to active "Device"
section "Card3".
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0xffe00000 - 0xffefffff (0x100000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0xfe000000 - 0xfe7fffff (0x800000) MX[B](B)
[6] -1 0xffbc0000 - 0xffbdffff (0x20000) MX[B](B)
[7] -1 0xff000000 - 0xff7fffff (0x800000) MX[B](B)
[8] -1 0xfff70000 - 0xfff7ffff (0x10000) MX[B](B)
[9] -1 0xfb000000 - 0xfbffffff (0x1000000) MX[B](B)
[10] -1 0xfff60000 - 0xfff6ffff (0x10000) MX[B](B)
[11] -1 0xfa000000 - 0xfaffffff (0x1000000) MX[B](B)
[12] -1 0xfff50000 - 0xfff5ffff (0x10000) MX[B](B)
[13] -1 0xf9000000 - 0xf9ffffff (0x1000000) MX[B](B)
[14] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[15] -1 0x00000000 - 0x000000ff (0x100) IX[B]
[16] -1 0x0000ffa0 - 0x0000ffbf (0x20) IX[B]E
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0xffe00000 - 0xffefffff (0x100000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0xfe000000 - 0xfe7fffff (0x800000) MX[B](B)
[6] -1 0xffbc0000 - 0xffbdffff (0x20000) MX[B](B)
[7] -1 0xff000000 - 0xff7fffff (0x800000) MX[B](B)
[8] -1 0xfff70000 - 0xfff7ffff (0x10000) MX[B](B)
[9] -1 0xfb000000 - 0xfbffffff (0x1000000) MX[B](B)
[10] -1 0xfff60000 - 0xfff6ffff (0x10000) MX[B](B)
[11] -1 0xfa000000 - 0xfaffffff (0x1000000) MX[B](B)
[12] -1 0xfff50000 - 0xfff5ffff (0x10000) MX[B](B)
[13] -1 0xf9000000 - 0xf9ffffff (0x1000000) MX[B](B)
[14] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[15] -1 0x00000000 - 0x000000ff (0x100) IX[B]
[16] -1 0x0000ffa0 - 0x0000ffbf (0x20) IX[B]E
(II) Loading sub module "atimisc"
(II) LoadModule: "atimisc"
(II) Reloading /usr/X11R6/lib/modules/drivers/atimisc_drv.o
(II) resource ranges after probing:
[0] -1 0xffe00000 - 0xffefffff (0x100000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0xfe000000 - 0xfe7fffff (0x800000) MX[B](B)
[6] -1 0xffbc0000 - 0xffbdffff (0x20000) MX[B](B)
[7] -1 0xff000000 - 0xff7fffff (0x800000) MX[B](B)
[8] -1 0xfff70000 - 0xfff7ffff (0x10000) MX[B](B)
[9] -1 0xfb000000 - 0xfbffffff (0x1000000) MX[B](B)
[10] -1 0xfff60000 - 0xfff6ffff (0x10000) MX[B](B)
[11] -1 0xfa000000 - 0xfaffffff (0x1000000) MX[B](B)
[12] -1 0xfff50000 - 0xfff5ffff (0x10000) MX[B](B)
[13] -1 0xf9000000 - 0xf9ffffff (0x1000000) MX[B](B)
[14] 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[15] 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[16] 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[17] 1 0x000a0000 - 0x000affff (0x10000) MS[B]
[18] 1 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[19] 1 0x000b8000 - 0x000bffff (0x8000) MS[B]
[20] 2 0x000a0000 - 0x000affff (0x10000) MS[B]
[21] 2 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[22] 2 0x000b8000 - 0x000bffff (0x8000) MS[B]
[23] 3 0x000a0000 - 0x000affff (0x10000) MS[B]
[24] 3 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[25] 3 0x000b8000 - 0x000bffff (0x8000) MS[B]
[26] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[27] -1 0x00000000 - 0x000000ff (0x100) IX[B]
[28] -1 0x0000ffa0 - 0x0000ffbf (0x20) IX[B]E
[29] 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[30] 0 0x000003c0 - 0x000003df (0x20) IS[B]
[31] 1 0x000002ec - 0x000003fc IS[S]
[32] 1 0x000003b0 - 0x000003bb (0xc) IS[B]
[33] 1 0x000003c0 - 0x000003df (0x20) IS[B]
[34] 2 0x000002ec - 0x000003fc IS[S]
[35] 2 0x000003b0 - 0x000003bb (0xc) IS[B]
[36] 2 0x000003c0 - 0x000003df (0x20) IS[B]
[37] 3 0x000002ec - 0x000003fc IS[S]
[38] 3 0x000003b0 - 0x000003bb (0xc) IS[B]
[39] 3 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) Setting vga for screen 1.
(II) Setting vga for screen 2.
(II) Setting vga for screen 3.
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/libint10.a
(II) Module int10: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.5
(II) VGA(0): initializing int10
(II) VGA(0): Primary V_BIOS segment is: 0xc000
(==) VGA(0): Depth 4, (==) framebuffer bpp 4
(==) VGA(0): RGB weight 666
(==) VGA(0): Default visual is StaticColor
(==) VGA(0): Using gamma correction (1.0, 1.0, 1.0)
(==) VGA(0): videoRam: 256 kBytes.
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.5
(II) VGA(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is
0x0000
(--) VGA(0): Pixel clocks available:
(--) VGA(0): pixel clocks: 25.050 28.322 28.310 36.000
(II) VGA(0): Monitor0: Using hsync range of 31.00-50.00 kHz
(II) VGA(0): Monitor0: Using vrefresh range of 55.00-90.00 Hz
(II) VGA(0): Not using default mode "800x600" (vrefresh out of range)
(II) VGA(0): Not using default mode "400x300" (vrefresh out of range)
(II) VGA(0): Not using default mode "800x600" (vrefresh out of range)
(II) VGA(0): Not using default mode "800x600" (vrefresh out of range)
(II) VGA(0): Not using default mode "400x300" (hsync out of range)
(II) VGA(0): Not using default mode "1024x768" (insufficient memory for
mode)
(II) VGA(0): Not using default mode "512x384" (bad mode
clock/interlace/doublescan)
(II) VGA(0): Not using default mode "1024x768" (insufficient memory for
mode)
(II) VGA(0): Not using default mode "512x384" (hsync out of range)
(II) VGA(0): Not using default mode "1024x768" (insufficient memory for
mode)
(II) VGA(0): Not using default mode "512x384" (hsync out of range)
(II) VGA(0): Not using default mode "1024x768" (insufficient memory for
mode)
(II) VGA(0): Not using default mode "512x384" (hsync out of range)
(II) VGA(0): Not using default mode "1024x768" (insufficient memory for
mode)
(II) VGA(0): Not using default mode "512x384" (hsync out of range)
(II) VGA(0): Not using default mode "1152x864" (insufficient memory for
mode)
(II) VGA(0): Not using default mode "576x432" (vrefresh out of range)
(II) VGA(0): Not using default mode "1280x960" (insufficient memory for
mode)
(II) VGA(0): Not using default mode "640x480" (vrefresh out of range)
(II) VGA(0): Not using default mode "1280x960" (insufficient memory for
mode)
(II) VGA(0): Not using default mode "640x480" (vrefresh out of range)
(II) VGA(0): Not using default mode "1280x1024" (insufficient memory for
mode)
(II) VGA(0): Not using default mode "640x512" (vrefresh out of range)
(II) VGA(0): Not using default mode "1280x1024" (insufficient memory for
mode)
(II) VGA(0): Not using default mode "640x512" (vrefresh out of range)
(II) VGA(0): Not using default mode "1280x1024" (insufficient memory for
mode)
(II) VGA(0): Not using default mode "640x512" (vrefresh out of range)
(II) VGA(0): Not using default mode "1600x1200" (insufficient memory for
mode)
(II) VGA(0): Not using default mode "800x600" (bad mode
clock/interlace/doublescan)
(II) VGA(0): Not using default mode "1600x1200" (insufficient memory for
mode)
(II) VGA(0): Not using default mode "800x600" (bad mode
clock/interlace/doublescan)
(II) VGA(0): Not using default mode "1600x1200" (insufficient memory for
mode)
(II) VGA(0): Not using default mode "800x600" (bad mode
clock/interlace/doublescan)
(II) VGA(0): Not using default mode "1600x1200" (insufficient memory for
mode)
(II) VGA(0): Not using default mode "800x600" (bad mode
clock/interlace/doublescan)
(II) VGA(0): Not using default mode "1600x1200" (insufficient memory for
mode)
(II) VGA(0): Not using default mode "800x600" (bad mode
clock/interlace/doublescan)
(II) VGA(0): Not using default mode "1792x1344" (insufficient memory for
mode)
(II) VGA(0): Not using default mode "896x672" (insufficient memory for
mode)
(II) VGA(0): Not using default mode "1792x1344" (insufficient memory for
mode)
(II) VGA(0): Not using default mode "896x672" (insufficient memory for
mode)
(II) VGA(0): Not using default mode "1856x1392" (insufficient memory for
mode)
(II) VGA(0): Not using default mode "928x696" (insufficient memory for
mode)
(II) VGA(0): Not using default mode "1856x1392" (insufficient memory for
mode)
(II) VGA(0): Not using default mode "928x696" (insufficient memory for
mode)
(II) VGA(0): Not using default mode "1920x1440" (insufficient memory for
mode)
(II) VGA(0): Not using default mode "960x720" (insufficient memory for
mode)
(II) VGA(0): Not using default mode "1920x1440" (insufficient memory for
mode)
(II) VGA(0): Not using default mode "960x720" (insufficient memory for
mode)
(II) VGA(0): Not using default mode "832x624" (vrefresh out of range)
(II) VGA(0): Not using default mode "1400x1050" (insufficient memory for
mode)
(II) VGA(0): Not using default mode "700x525" (vrefresh out of range)
(II) VGA(0): Not using default mode "1400x1050" (insufficient memory for
mode)
(II) VGA(0): Not using default mode "700x525" (vrefresh out of range)
(II) VGA(0): Not using default mode "1600x1024" (insufficient memory for
mode)
(II) VGA(0): Not using default mode "800x512" (vrefresh out of range)
(II) VGA(0): Not using mode "640x400" (no clock available for mode)
(II) VGA(0): Not using mode "640x350" (no clock available for mode)
(II) VGA(0): Not using mode "320x200" (no clock available for mode)
(II) VGA(0): Not using mode "320x175" (no clock available for mode)
(--) VGA(0): Virtual size is 800x600 (pitch 800)
(**) VGA(0): Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
(II) VGA(0): Modeline "800x600" 36.00 800 824 896 1024 600 601 603
625 +hsync +vsync
(**) VGA(0): Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz
(II) VGA(0): Modeline "640x480" 36.00 640 696 752 832 480 481 484
509 -hsync -vsync
(**) VGA(0): Default mode "640x480": 25.1 MHz, 31.3 kHz, 59.6 Hz
(II) VGA(0): Modeline "640x480" 25.05 640 656 752 800 480 490 492
525 -hsync -vsync
(**) VGA(0): Default mode "720x400": 36.0 MHz, 38.5 kHz, 86.2 Hz
(II) VGA(0): Modeline "720x400" 36.00 720 756 828 936 400 401 404
446 -hsync +vsync
(**) VGA(0): Default mode "416x312": 28.3 MHz, 49.2 kHz, 73.8 Hz (D)
(II) VGA(0): Modeline "416x312" 28.32 416 432 464 576 312 312 314
333 doublescan -hsync -vsync
(**) VGA(0): Default mode "400x300": 18.0 MHz, 35.2 kHz, 56.3 Hz (D)
(II) VGA(0): Modeline "400x300" 18.00 400 412 448 512 300 300 301
312 doublescan +hsync +vsync
(**) VGA(0): Default mode "320x240": 18.0 MHz, 43.3 kHz, 85.2 Hz (D)
(II) VGA(0): Modeline "320x240" 18.00 320 348 376 416 240 240 242
254 doublescan -hsync -vsync
(**) VGA(0): Default mode "320x240": 12.5 MHz, 31.3 kHz, 59.8 Hz (D)
(II) VGA(0): Modeline "320x240" 12.53 320 328 376 400 240 245 246
262 doublescan -hsync -vsync
(**) VGA(0): Default mode "360x200": 18.0 MHz, 38.5 kHz, 86.2 Hz (D)
(II) VGA(0): Modeline "360x200" 18.00 360 378 414 468 200 200 202
223 doublescan -hsync +vsync
(==) VGA(0): DPI set to (75, 75)
(II) Loading sub module "xf4bpp"
(II) LoadModule: "xf4bpp"
(II) Loading /usr/X11R6/lib/modules/libxf4bpp.a
(II) Module xf4bpp: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
ABI class: XFree86 ANSI C Emulation, version 0.1
(II) Loading sub module "xf1bpp"
(II) LoadModule: "xf1bpp"
(II) Loading /usr/X11R6/lib/modules/libxf1bpp.a
(II) Module xf1bpp: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
ABI class: XFree86 ANSI C Emulation, version 0.1
(==) ATI(1): Chipset: "ati".
(==) ATI(1): Depth 8, (==) framebuffer bpp 8
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/X11R6/lib/modules/libint10.a
(II) Truncating PCI BIOS Length to 32768
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.5
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/X11R6/lib/modules/libvbe.a
(II) Module vbe: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.5
(II) ATI(1): VESA BIOS detected
(II) ATI(1): VESA VBE Version 1.2
(II) ATI(1): VESA VBE Total Mem: 2048 kB
(II) ATI(1): VESA VBE OEM: ATI MACH64
(--) ATI(1): ATI 264CT graphics controller detected.
(--) ATI(1): Chip type 4354 "CT", version 1, foundry NEC, class 0,
revision 0x00.
(--) ATI(1): PCI bus interface detected; sparse I/O base is 0x02EC.
(--) ATI(1): ATI Mach64 adapter detected.
(--) ATI(1): Internal RAMDAC (subtype 0) detected.
(==) ATI(1): RGB weight 888
(==) ATI(1): Default visual is PseudoColor
(==) ATI(1): Using gamma correction (1.0, 1.0, 1.0)
(II) ATI(1): Using Mach64 accelerator CRTC.
(II) ATI(1): Storing hardware cursor image at 0xF91FFC00.
(II) ATI(1): Using 8 MB linear aperture at 0xF9000000.
(!!) ATI(1): Virtual resolutions will be limited to 2047 kB
due to linear aperture size and/or placement of hardware cursor image
area.
(II) ATI(1): Using Block 0 MMIO aperture at 0xF97FFC00.
(II) ATI(1): MMIO write caching enabled.
(--) ATI(1): 2048 kB of DRAM detected (using 2047 kB).
(WW) ATI(1): Cannot shadow an accelerated frame buffer.
(--) ATI(1): Internal programmable clock generator detected.
(--) ATI(1): Reference clock 157.5/11 (14.318) MHz.
(II) ATI(1): Monitor1: Using hsync range of 30.00-70.00 kHz
(II) ATI(1): Monitor1: Using vrefresh range of 50.00-90.00 Hz
(II) ATI(1): Maximum clock: 135.00 MHz
(II) ATI(1): Not using default mode "320x175" (bad mode
clock/interlace/doublescan)
(II) ATI(1): Not using default mode "320x200" (bad mode
clock/interlace/doublescan)
(II) ATI(1): Not using default mode "360x200" (bad mode
clock/interlace/doublescan)
(II) ATI(1): Not using default mode "320x240" (bad mode
clock/interlace/doublescan)
(II) ATI(1): Not using default mode "320x240" (bad mode
clock/interlace/doublescan)
(II) ATI(1): Not using default mode "320x240" (bad mode
clock/interlace/doublescan)
(II) ATI(1): Not using default mode "320x240" (bad mode
clock/interlace/doublescan)
(II) ATI(1): Not using default mode "400x300" (bad mode
clock/interlace/doublescan)
(II) ATI(1): Not using default mode "400x300" (bad mode
clock/interlace/doublescan)
(II) ATI(1): Not using default mode "400x300" (bad mode
clock/interlace/doublescan)
(II) ATI(1): Not using default mode "400x300" (bad mode
clock/interlace/doublescan)
(II) ATI(1): Not using default mode "400x300" (bad mode
clock/interlace/doublescan)
(II) ATI(1): Not using default mode "512x384" (bad mode
clock/interlace/doublescan)
(II) ATI(1): Not using default mode "512x384" (bad mode
clock/interlace/doublescan)
(II) ATI(1): Not using default mode "512x384" (bad mode
clock/interlace/doublescan)
(II) ATI(1): Not using default mode "512x384" (bad mode
clock/interlace/doublescan)
(II) ATI(1): Not using default mode "512x384" (bad mode
clock/interlace/doublescan)
(II) ATI(1): Not using default mode "576x432" (bad mode
clock/interlace/doublescan)
(II) ATI(1): Not using default mode "640x480" (bad mode
clock/interlace/doublescan)
(II) ATI(1): Not using default mode "1280x960" (bad mode
clock/interlace/doublescan)
(II) ATI(1): Not using default mode "640x480" (bad mode
clock/interlace/doublescan)
(II) ATI(1): Not using default mode "640x512" (bad mode
clock/interlace/doublescan)
(II) ATI(1): Not using default mode "1280x1024" (hsync out of range)
(II) ATI(1): Not using default mode "640x512" (bad mode
clock/interlace/doublescan)
(II) ATI(1): Not using default mode "1280x1024" (bad mode
clock/interlace/doublescan)
(II) ATI(1): Not using default mode "640x512" (bad mode
clock/interlace/doublescan)
(II) ATI(1): Not using default mode "1600x1200" (horizontal timing out
of range)
(II) ATI(1): Not using default mode "800x600" (bad mode
clock/interlace/doublescan)
(II) ATI(1): Not using default mode "1600x1200" (horizontal timing out
of range)
(II) ATI(1): Not using default mode "800x600" (bad mode
clock/interlace/doublescan)
(II) ATI(1): Not using default mode "1600x1200" (horizontal timing out
of range)
(II) ATI(1): Not using default mode "800x600" (bad mode
clock/interlace/doublescan)
(II) ATI(1): Not using default mode "1600x1200" (horizontal timing out
of range)
(II) ATI(1): Not using default mode "800x600" (bad mode
clock/interlace/doublescan)
(II) ATI(1): Not using default mode "1600x1200" (horizontal timing out
of range)
(II) ATI(1): Not using default mode "800x600" (bad mode
clock/interlace/doublescan)
(II) ATI(1): Not using default mode "1792x1344" (insufficient memory for
mode)
(II) ATI(1): Not using default mode "896x672" (bad mode
clock/interlace/doublescan)
(II) ATI(1): Not using default mode "1792x1344" (insufficient memory for
mode)
(II) ATI(1): Not using default mode "896x672" (bad mode
clock/interlace/doublescan)
(II) ATI(1): Not using default mode "1856x1392" (insufficient memory for
mode)
(II) ATI(1): Not using default mode "928x696" (bad mode
clock/interlace/doublescan)
(II) ATI(1): Not using default mode "1856x1392" (insufficient memory for
mode)
(II) ATI(1): Not using default mode "928x696" (bad mode
clock/interlace/doublescan)
(II) ATI(1): Not using default mode "1920x1440" (insufficient memory for
mode)
(II) ATI(1): Not using default mode "960x720" (bad mode
clock/interlace/doublescan)
(II) ATI(1): Not using default mode "1920x1440" (insufficient memory for
mode)
(II) ATI(1): Not using default mode "960x720" (bad mode
clock/interlace/doublescan)
(II) ATI(1): Not using default mode "416x312" (bad mode
clock/interlace/doublescan)
(II) ATI(1): Not using default mode "700x525" (bad mode
clock/interlace/doublescan)
(II) ATI(1): Not using default mode "1400x1050" (bad mode
clock/interlace/doublescan)
(II) ATI(1): Not using default mode "700x525" (bad mode
clock/interlace/doublescan)
(II) ATI(1): Not using default mode "800x512" (bad mode
clock/interlace/doublescan)
(--) ATI(1): Virtual size is 1400x1050 (pitch 1400)
(**) ATI(1): Default mode "1400x1050": 122.0 MHz, 64.9 kHz, 60.0 Hz
(II) ATI(1): Modeline "1400x1050" 122.00 1400 1488 1640 1880 1050
1052 1064 1082 +hsync +vsync
(**) ATI(1): Default mode "1280x1024": 108.0 MHz, 64.0 kHz, 60.0 Hz
(II) ATI(1): Modeline "1280x1024" 108.00 1280 1328 1440 1688 1024
1025 1028 1066 +hsync +vsync
(**) ATI(1): Default mode "1280x960": 108.0 MHz, 60.0 kHz, 60.0 Hz
(II) ATI(1): Modeline "1280x960" 108.00 1280 1376 1488 1800 960 961
964 1000 +hsync +vsync
(**) ATI(1): Default mode "1152x864": 108.0 MHz, 67.5 kHz, 75.0 Hz
(II) ATI(1): Modeline "1152x864" 108.00 1152 1216 1344 1600 864 865
868 900 +hsync +vsync
(**) ATI(1): Default mode "1024x768": 94.5 MHz, 68.7 kHz, 85.0 Hz
(II) ATI(1): Modeline "1024x768" 94.50 1024 1072 1168 1376 768 769
772 808 +hsync +vsync
(**) ATI(1): Default mode "1024x768": 78.8 MHz, 60.1 kHz, 75.1 Hz
(II) ATI(1): Modeline "1024x768" 78.80 1024 1040 1136 1312 768 769
772 800 +hsync +vsync
(**) ATI(1): Default mode "1024x768": 75.0 MHz, 56.5 kHz, 70.1 Hz
(II) ATI(1): Modeline "1024x768" 75.00 1024 1048 1184 1328 768 771
777 806 -hsync -vsync
(**) ATI(1): Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
(II) ATI(1): Modeline "1024x768" 65.00 1024 1048 1184 1344 768 771
777 806 -hsync -vsync
(**) ATI(1): Default mode "1024x768": 44.9 MHz, 35.5 kHz, 87.1 Hz (I)
(II) ATI(1): Modeline "1024x768" 44.90 1024 1032 1208 1264 768 768
776 817 interlace +hsync +vsync
(**) ATI(1): Default mode "832x624": 57.3 MHz, 49.7 kHz, 74.6 Hz
(II) ATI(1): Modeline "832x624" 57.28 832 864 928 1152 624 625 628
667 -hsync -vsync
(**) ATI(1): Default mode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz
(II) ATI(1): Modeline "800x600" 56.30 800 832 896 1048 600 601 604
631 +hsync +vsync
(**) ATI(1): Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
(II) ATI(1): Modeline "800x600" 49.50 800 816 896 1056 600 601 604
625 +hsync +vsync
(**) ATI(1): Default mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz
(II) ATI(1): Modeline "800x600" 50.00 800 856 976 1040 600 637 643
666 +hsync +vsync
(**) ATI(1): Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(II) ATI(1): Modeline "800x600" 40.00 800 840 968 1056 600 601 605
628 +hsync +vsync
(**) ATI(1): Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
(II) ATI(1): Modeline "800x600" 36.00 800 824 896 1024 600 601 603
625 +hsync +vsync
(**) ATI(1): Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz
(II) ATI(1): Modeline "640x480" 36.00 640 696 752 832 480 481 484
509 -hsync -vsync
(**) ATI(1): Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
(II) ATI(1): Modeline "640x480" 31.50 640 656 720 840 480 481 484
500 -hsync -vsync
(**) ATI(1): Default mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz
(II) ATI(1): Modeline "640x480" 31.50 640 664 704 832 480 489 491
520 -hsync -vsync
(**) ATI(1): Default mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz
(II) ATI(1): Modeline "640x480" 25.20 640 656 752 800 480 490 492
525 -hsync -vsync
(**) ATI(1): Default mode "720x400": 35.5 MHz, 37.9 kHz, 85.0 Hz
(II) ATI(1): Modeline "720x400" 35.50 720 756 828 936 400 401 404
446 -hsync +vsync
(**) ATI(1): Default mode "640x400": 31.5 MHz, 37.9 kHz, 85.1 Hz
(II) ATI(1): Modeline "640x400" 31.50 640 672 736 832 400 401 404
445 -hsync +vsync
(**) ATI(1): Default mode "640x350": 31.5 MHz, 37.9 kHz, 85.1 Hz
(II) ATI(1): Modeline "640x350" 31.50 640 672 736 832 350 382 385
445 +hsync -vsync
(==) ATI(1): DPI set to (75, 75)
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.5
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.5
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
ABI class: XFree86 ANSI C Emulation, version 0.1
(==) ATI(2): Chipset: "ati".
(==) ATI(2): Depth 8, (==) framebuffer bpp 8
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/X11R6/lib/modules/libint10.a
(II) Truncating PCI BIOS Length to 32768
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Reloading /usr/X11R6/lib/modules/libddc.a
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Reloading /usr/X11R6/lib/modules/libvbe.a
(II) ATI(2): VESA BIOS detected
(II) ATI(2): VESA VBE Version 1.2
(II) ATI(2): VESA VBE Total Mem: 2048 kB
(II) ATI(2): VESA VBE OEM: ATI MACH64
(--) ATI(2): ATI 264CT graphics controller detected.
(--) ATI(2): Chip type 4354 "CT", version 1, foundry NEC, class 0,
revision 0x00.
(--) ATI(2): PCI bus interface detected; sparse I/O base is 0x02EC.
(--) ATI(2): ATI Mach64 adapter detected.
(--) ATI(2): Internal RAMDAC (subtype 0) detected.
(==) ATI(2): RGB weight 888
(==) ATI(2): Default visual is PseudoColor
(==) ATI(2): Using gamma correction (1.0, 1.0, 1.0)
(II) ATI(2): Using Mach64 accelerator CRTC.
(II) ATI(2): Storing hardware cursor image at 0xFA1FFC00.
(II) ATI(2): Using 8 MB linear aperture at 0xFA000000.
(!!) ATI(2): Virtual resolutions will be limited to 2047 kB
due to linear aperture size and/or placement of hardware cursor image
area.
(II) ATI(2): Using Block 0 MMIO aperture at 0xFA7FFC00.
(II) ATI(2): MMIO write caching enabled.
(--) ATI(2): 2048 kB of DRAM detected (using 2047 kB).
(WW) ATI(2): Cannot shadow an accelerated frame buffer.
(--) ATI(2): Internal programmable clock generator detected.
(--) ATI(2): Reference clock 157.5/11 (14.318) MHz.
(II) ATI(2): Monitor2: Using hsync range of 31.00-65.00 kHz
(II) ATI(2): Monitor2: Using vrefresh range of 55.00-120.00 Hz
(II) ATI(2): Maximum clock: 135.00 MHz
(II) ATI(2): Not using default mode "320x175" (bad mode
clock/interlace/doublescan)
(II) ATI(2): Not using default mode "320x200" (bad mode
clock/interlace/doublescan)
(II) ATI(2): Not using default mode "360x200" (bad mode
clock/interlace/doublescan)
(II) ATI(2): Not using default mode "320x240" (bad mode
clock/interlace/doublescan)
(II) ATI(2): Not using default mode "320x240" (bad mode
clock/interlace/doublescan)
(II) ATI(2): Not using default mode "320x240" (bad mode
clock/interlace/doublescan)
(II) ATI(2): Not using default mode "320x240" (bad mode
clock/interlace/doublescan)
(II) ATI(2): Not using default mode "400x300" (bad mode
clock/interlace/doublescan)
(II) ATI(2): Not using default mode "400x300" (bad mode
clock/interlace/doublescan)
(II) ATI(2): Not using default mode "400x300" (bad mode
clock/interlace/doublescan)
(II) ATI(2): Not using default mode "400x300" (bad mode
clock/interlace/doublescan)
(II) ATI(2): Not using default mode "400x300" (bad mode
clock/interlace/doublescan)
(II) ATI(2): Not using default mode "512x384" (bad mode
clock/interlace/doublescan)
(II) ATI(2): Not using default mode "512x384" (bad mode
clock/interlace/doublescan)
(II) ATI(2): Not using default mode "512x384" (bad mode
clock/interlace/doublescan)
(II) ATI(2): Not using default mode "512x384" (bad mode
clock/interlace/doublescan)
(II) ATI(2): Not using default mode "1024x768" (hsync out of range)
(II) ATI(2): Not using default mode "512x384" (bad mode
clock/interlace/doublescan)
(II) ATI(2): Not using default mode "1152x864" (hsync out of range)
(II) ATI(2): Not using default mode "576x432" (bad mode
clock/interlace/doublescan)
(II) ATI(2): Not using default mode "640x480" (bad mode
clock/interlace/doublescan)
(II) ATI(2): Not using default mode "1280x960" (bad mode
clock/interlace/doublescan)
(II) ATI(2): Not using default mode "640x480" (bad mode
clock/interlace/doublescan)
(II) ATI(2): Not using default mode "640x512" (bad mode
clock/interlace/doublescan)
(II) ATI(2): Not using default mode "1280x1024" (hsync out of range)
(II) ATI(2): Not using default mode "640x512" (bad mode
clock/interlace/doublescan)
(II) ATI(2): Not using default mode "1280x1024" (bad mode
clock/interlace/doublescan)
(II) ATI(2): Not using default mode "640x512" (bad mode
clock/interlace/doublescan)
(II) ATI(2): Not using default mode "1600x1200" (horizontal timing out
of range)
(II) ATI(2): Not using default mode "800x600" (bad mode
clock/interlace/doublescan)
(II) ATI(2): Not using default mode "1600x1200" (horizontal timing out
of range)
(II) ATI(2): Not using default mode "800x600" (bad mode
clock/interlace/doublescan)
(II) ATI(2): Not using default mode "1600x1200" (horizontal timing out
of range)
(II) ATI(2): Not using default mode "800x600" (bad mode
clock/interlace/doublescan)
(II) ATI(2): Not using default mode "1600x1200" (horizontal timing out
of range)
(II) ATI(2): Not using default mode "800x600" (bad mode
clock/interlace/doublescan)
(II) ATI(2): Not using default mode "1600x1200" (horizontal timing out
of range)
(II) ATI(2): Not using default mode "800x600" (bad mode
clock/interlace/doublescan)
(II) ATI(2): Not using default mode "1792x1344" (insufficient memory for
mode)
(II) ATI(2): Not using default mode "896x672" (bad mode
clock/interlace/doublescan)
(II) ATI(2): Not using default mode "1792x1344" (insufficient memory for
mode)
(II) ATI(2): Not using default mode "896x672" (bad mode
clock/interlace/doublescan)
(II) ATI(2): Not using default mode "1856x1392" (insufficient memory for
mode)
(II) ATI(2): Not using default mode "928x696" (bad mode
clock/interlace/doublescan)
(II) ATI(2): Not using default mode "1856x1392" (insufficient memory for
mode)
(II) ATI(2): Not using default mode "928x696" (bad mode
clock/interlace/doublescan)
(II) ATI(2): Not using default mode "1920x1440" (insufficient memory for
mode)
(II) ATI(2): Not using default mode "960x720" (bad mode
clock/interlace/doublescan)
(II) ATI(2): Not using default mode "1920x1440" (insufficient memory for
mode)
(II) ATI(2): Not using default mode "960x720" (bad mode
clock/interlace/doublescan)
(II) ATI(2): Not using default mode "416x312" (bad mode
clock/interlace/doublescan)
(II) ATI(2): Not using default mode "700x525" (bad mode
clock/interlace/doublescan)
(II) ATI(2): Not using default mode "1400x1050" (bad mode
clock/interlace/doublescan)
(II) ATI(2): Not using default mode "700x525" (bad mode
clock/interlace/doublescan)
(II) ATI(2): Not using default mode "800x512" (bad mode
clock/interlace/doublescan)
(--) ATI(2): Virtual size is 1400x1050 (pitch 1400)
(**) ATI(2): Default mode "1400x1050": 122.0 MHz, 64.9 kHz, 60.0 Hz
(II) ATI(2): Modeline "1400x1050" 122.00 1400 1488 1640 1880 1050
1052 1064 1082 +hsync +vsync
(**) ATI(2): Default mode "1280x1024": 108.0 MHz, 64.0 kHz, 60.0 Hz
(II) ATI(2): Modeline "1280x1024" 108.00 1280 1328 1440 1688 1024
1025 1028 1066 +hsync +vsync
(**) ATI(2): Default mode "1280x960": 108.0 MHz, 60.0 kHz, 60.0 Hz
(II) ATI(2): Modeline "1280x960" 108.00 1280 1376 1488 1800 960 961
964 1000 +hsync +vsync
(**) ATI(2): Default mode "1024x768": 78.8 MHz, 60.1 kHz, 75.1 Hz
(II) ATI(2): Modeline "1024x768" 78.80 1024 1040 1136 1312 768 769
772 800 +hsync +vsync
(**) ATI(2): Default mode "1024x768": 75.0 MHz, 56.5 kHz, 70.1 Hz
(II) ATI(2): Modeline "1024x768" 75.00 1024 1048 1184 1328 768 771
777 806 -hsync -vsync
(**) ATI(2): Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
(II) ATI(2): Modeline "1024x768" 65.00 1024 1048 1184 1344 768 771
777 806 -hsync -vsync
(**) ATI(2): Default mode "1024x768": 44.9 MHz, 35.5 kHz, 87.1 Hz (I)
(II) ATI(2): Modeline "1024x768" 44.90 1024 1032 1208 1264 768 768
776 817 interlace +hsync +vsync
(**) ATI(2): Default mode "832x624": 57.3 MHz, 49.7 kHz, 74.6 Hz
(II) ATI(2): Modeline "832x624" 57.28 832 864 928 1152 624 625 628
667 -hsync -vsync
(**) ATI(2): Default mode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz
(II) ATI(2): Modeline "800x600" 56.30 800 832 896 1048 600 601 604
631 +hsync +vsync
(**) ATI(2): Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
(II) ATI(2): Modeline "800x600" 49.50 800 816 896 1056 600 601 604
625 +hsync +vsync
(**) ATI(2): Default mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz
(II) ATI(2): Modeline "800x600" 50.00 800 856 976 1040 600 637 643
666 +hsync +vsync
(**) ATI(2): Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(II) ATI(2): Modeline "800x600" 40.00 800 840 968 1056 600 601 605
628 +hsync +vsync
(**) ATI(2): Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
(II) ATI(2): Modeline "800x600" 36.00 800 824 896 1024 600 601 603
625 +hsync +vsync
(**) ATI(2): Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz
(II) ATI(2): Modeline "640x480" 36.00 640 696 752 832 480 481 484
509 -hsync -vsync
(**) ATI(2): Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
(II) ATI(2): Modeline "640x480" 31.50 640 656 720 840 480 481 484
500 -hsync -vsync
(**) ATI(2): Default mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz
(II) ATI(2): Modeline "640x480" 31.50 640 664 704 832 480 489 491
520 -hsync -vsync
(**) ATI(2): Default mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz
(II) ATI(2): Modeline "640x480" 25.20 640 656 752 800 480 490 492
525 -hsync -vsync
(**) ATI(2): Default mode "720x400": 35.5 MHz, 37.9 kHz, 85.0 Hz
(II) ATI(2): Modeline "720x400" 35.50 720 756 828 936 400 401 404
446 -hsync +vsync
(**) ATI(2): Default mode "640x400": 31.5 MHz, 37.9 kHz, 85.1 Hz
(II) ATI(2): Modeline "640x400" 31.50 640 672 736 832 400 401 404
445 -hsync +vsync
(**) ATI(2): Default mode "640x350": 31.5 MHz, 37.9 kHz, 85.1 Hz
(II) ATI(2): Modeline "640x350" 31.50 640 672 736 832 350 382 385
445 +hsync -vsync
(==) ATI(2): DPI set to (75, 75)
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Reloading /usr/X11R6/lib/modules/libxaa.a
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Reloading /usr/X11R6/lib/modules/libramdac.a
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Reloading /usr/X11R6/lib/modules/libfb.a
(==) ATI(3): Chipset: "ati".
(==) ATI(3): Depth 8, (==) framebuffer bpp 8
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/X11R6/lib/modules/libint10.a
(II) Truncating PCI BIOS Length to 32768
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Reloading /usr/X11R6/lib/modules/libddc.a
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Reloading /usr/X11R6/lib/modules/libvbe.a
(II) ATI(3): VESA BIOS detected
(II) ATI(3): VESA VBE Version 1.2
(II) ATI(3): VESA VBE Total Mem: 2048 kB
(II) ATI(3): VESA VBE OEM: ATI MACH64
(--) ATI(3): ATI 264CT graphics controller detected.
(--) ATI(3): Chip type 4354 "CT", version 1, foundry NEC, class 0,
revision 0x00.
(--) ATI(3): PCI bus interface detected; sparse I/O base is 0x02EC.
(--) ATI(3): ATI Mach64 adapter detected.
(--) ATI(3): Internal RAMDAC (subtype 0) detected.
(==) ATI(3): RGB weight 888
(==) ATI(3): Default visual is PseudoColor
(==) ATI(3): Using gamma correction (1.0, 1.0, 1.0)
(II) ATI(3): Using Mach64 accelerator CRTC.
(II) ATI(3): Storing hardware cursor image at 0xFB1FFC00.
(II) ATI(3): Using 8 MB linear aperture at 0xFB000000.
(!!) ATI(3): Virtual resolutions will be limited to 2047 kB
due to linear aperture size and/or placement of hardware cursor image
area.
(II) ATI(3): Using Block 0 MMIO aperture at 0xFB7FFC00.
(II) ATI(3): MMIO write caching enabled.
(--) ATI(3): 2048 kB of DRAM detected (using 2047 kB).
(WW) ATI(3): Cannot shadow an accelerated frame buffer.
(--) ATI(3): Internal programmable clock generator detected.
(--) ATI(3): Reference clock 157.5/11 (14.318) MHz.
(II) ATI(3): Monitor3: Using hsync range of 31.00-65.00 kHz
(II) ATI(3): Monitor3: Using vrefresh range of 55.00-120.00 Hz
(II) ATI(3): Maximum clock: 135.00 MHz
(II) ATI(3): Not using default mode "320x175" (bad mode
clock/interlace/doublescan)
(II) ATI(3): Not using default mode "320x200" (bad mode
clock/interlace/doublescan)
(II) ATI(3): Not using default mode "360x200" (bad mode
clock/interlace/doublescan)
(II) ATI(3): Not using default mode "320x240" (bad mode
clock/interlace/doublescan)
(II) ATI(3): Not using default mode "320x240" (bad mode
clock/interlace/doublescan)
(II) ATI(3): Not using default mode "320x240" (bad mode
clock/interlace/doublescan)
(II) ATI(3): Not using default mode "320x240" (bad mode
clock/interlace/doublescan)
(II) ATI(3): Not using default mode "400x300" (bad mode
clock/interlace/doublescan)
(II) ATI(3): Not using default mode "400x300" (bad mode
clock/interlace/doublescan)
(II) ATI(3): Not using default mode "400x300" (bad mode
clock/interlace/doublescan)
(II) ATI(3): Not using default mode "400x300" (bad mode
clock/interlace/doublescan)
(II) ATI(3): Not using default mode "400x300" (bad mode
clock/interlace/doublescan)
(II) ATI(3): Not using default mode "512x384" (bad mode
clock/interlace/doublescan)
(II) ATI(3): Not using default mode "512x384" (bad mode
clock/interlace/doublescan)
(II) ATI(3): Not using default mode "512x384" (bad mode
clock/interlace/doublescan)
(II) ATI(3): Not using default mode "512x384" (bad mode
clock/interlace/doublescan)
(II) ATI(3): Not using default mode "1024x768" (hsync out of range)
(II) ATI(3): Not using default mode "512x384" (bad mode
clock/interlace/doublescan)
(II) ATI(3): Not using default mode "1152x864" (hsync out of range)
(II) ATI(3): Not using default mode "576x432" (bad mode
clock/interlace/doublescan)
(II) ATI(3): Not using default mode "640x480" (bad mode
clock/interlace/doublescan)
(II) ATI(3): Not using default mode "1280x960" (bad mode
clock/interlace/doublescan)
(II) ATI(3): Not using default mode "640x480" (bad mode
clock/interlace/doublescan)
(II) ATI(3): Not using default mode "640x512" (bad mode
clock/interlace/doublescan)
(II) ATI(3): Not using default mode "1280x1024" (hsync out of range)
(II) ATI(3): Not using default mode "640x512" (bad mode
clock/interlace/doublescan)
(II) ATI(3): Not using default mode "1280x1024" (bad mode
clock/interlace/doublescan)
(II) ATI(3): Not using default mode "640x512" (bad mode
clock/interlace/doublescan)
(II) ATI(3): Not using default mode "1600x1200" (horizontal timing out
of range)
(II) ATI(3): Not using default mode "800x600" (bad mode
clock/interlace/doublescan)
(II) ATI(3): Not using default mode "1600x1200" (horizontal timing out
of range)
(II) ATI(3): Not using default mode "800x600" (bad mode
clock/interlace/doublescan)
(II) ATI(3): Not using default mode "1600x1200" (horizontal timing out
of range)
(II) ATI(3): Not using default mode "800x600" (bad mode
clock/interlace/doublescan)
(II) ATI(3): Not using default mode "1600x1200" (horizontal timing out
of range)
(II) ATI(3): Not using default mode "800x600" (bad mode
clock/interlace/doublescan)
(II) ATI(3): Not using default mode "1600x1200" (horizontal timing out
of range)
(II) ATI(3): Not using default mode "800x600" (bad mode
clock/interlace/doublescan)
(II) ATI(3): Not using default mode "1792x1344" (insufficient memory for
mode)
(II) ATI(3): Not using default mode "896x672" (bad mode
clock/interlace/doublescan)
(II) ATI(3): Not using default mode "1792x1344" (insufficient memory for
mode)
(II) ATI(3): Not using default mode "896x672" (bad mode
clock/interlace/doublescan)
(II) ATI(3): Not using default mode "1856x1392" (insufficient memory for
mode)
(II) ATI(3): Not using default mode "928x696" (bad mode
clock/interlace/doublescan)
(II) ATI(3): Not using default mode "1856x1392" (insufficient memory for
mode)
(II) ATI(3): Not using default mode "928x696" (bad mode
clock/interlace/doublescan)
(II) ATI(3): Not using default mode "1920x1440" (insufficient memory for
mode)
(II) ATI(3): Not using default mode "960x720" (bad mode
clock/interlace/doublescan)
(II) ATI(3): Not using default mode "1920x1440" (insufficient memory for
mode)
(II) ATI(3): Not using default mode "960x720" (bad mode
clock/interlace/doublescan)
(II) ATI(3): Not using default mode "416x312" (bad mode
clock/interlace/doublescan)
(II) ATI(3): Not using default mode "700x525" (bad mode
clock/interlace/doublescan)
(II) ATI(3): Not using default mode "1400x1050" (bad mode
clock/interlace/doublescan)
(II) ATI(3): Not using default mode "700x525" (bad mode
clock/interlace/doublescan)
(II) ATI(3): Not using default mode "800x512" (bad mode
clock/interlace/doublescan)
(--) ATI(3): Virtual size is 1400x1050 (pitch 1400)
(**) ATI(3): Default mode "1400x1050": 122.0 MHz, 64.9 kHz, 60.0 Hz
(II) ATI(3): Modeline "1400x1050" 122.00 1400 1488 1640 1880 1050
1052 1064 1082 +hsync +vsync
(**) ATI(3): Default mode "1280x1024": 108.0 MHz, 64.0 kHz, 60.0 Hz
(II) ATI(3): Modeline "1280x1024" 108.00 1280 1328 1440 1688 1024
1025 1028 1066 +hsync +vsync
(**) ATI(3): Default mode "1280x960": 108.0 MHz, 60.0 kHz, 60.0 Hz
(II) ATI(3): Modeline "1280x960" 108.00 1280 1376 1488 1800 960 961
964 1000 +hsync +vsync
(**) ATI(3): Default mode "1024x768": 78.8 MHz, 60.1 kHz, 75.1 Hz
(II) ATI(3): Modeline "1024x768" 78.80 1024 1040 1136 1312 768 769
772 800 +hsync +vsync
(**) ATI(3): Default mode "1024x768": 75.0 MHz, 56.5 kHz, 70.1 Hz
(II) ATI(3): Modeline "1024x768" 75.00 1024 1048 1184 1328 768 771
777 806 -hsync -vsync
(**) ATI(3): Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
(II) ATI(3): Modeline "1024x768" 65.00 1024 1048 1184 1344 768 771
777 806 -hsync -vsync
(**) ATI(3): Default mode "1024x768": 44.9 MHz, 35.5 kHz, 87.1 Hz (I)
(II) ATI(3): Modeline "1024x768" 44.90 1024 1032 1208 1264 768 768
776 817 interlace +hsync +vsync
(**) ATI(3): Default mode "832x624": 57.3 MHz, 49.7 kHz, 74.6 Hz
(II) ATI(3): Modeline "832x624" 57.28 832 864 928 1152 624 625 628
667 -hsync -vsync
(**) ATI(3): Default mode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz
(II) ATI(3): Modeline "800x600" 56.30 800 832 896 1048 600 601 604
631 +hsync +vsync
(**) ATI(3): Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
(II) ATI(3): Modeline "800x600" 49.50 800 816 896 1056 600 601 604
625 +hsync +vsync
(**) ATI(3): Default mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz
(II) ATI(3): Modeline "800x600" 50.00 800 856 976 1040 600 637 643
666 +hsync +vsync
(**) ATI(3): Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(II) ATI(3): Modeline "800x600" 40.00 800 840 968 1056 600 601 605
628 +hsync +vsync
(**) ATI(3): Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
(II) ATI(3): Modeline "800x600" 36.00 800 824 896 1024 600 601 603
625 +hsync +vsync
(**) ATI(3): Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz
(II) ATI(3): Modeline "640x480" 36.00 640 696 752 832 480 481 484
509 -hsync -vsync
(**) ATI(3): Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
(II) ATI(3): Modeline "640x480" 31.50 640 656 720 840 480 481 484
500 -hsync -vsync
(**) ATI(3): Default mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz
(II) ATI(3): Modeline "640x480" 31.50 640 664 704 832 480 489 491
520 -hsync -vsync
(**) ATI(3): Default mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz
(II) ATI(3): Modeline "640x480" 25.20 640 656 752 800 480 490 492
525 -hsync -vsync
(**) ATI(3): Default mode "720x400": 35.5 MHz, 37.9 kHz, 85.0 Hz
(II) ATI(3): Modeline "720x400" 35.50 720 756 828 936 400 401 404
446 -hsync +vsync
(**) ATI(3): Default mode "640x400": 31.5 MHz, 37.9 kHz, 85.1 Hz
(II) ATI(3): Modeline "640x400" 31.50 640 672 736 832 400 401 404
445 -hsync +vsync
(**) ATI(3): Default mode "640x350": 31.5 MHz, 37.9 kHz, 85.1 Hz
(II) ATI(3): Modeline "640x350" 31.50 640 672 736 832 350 382 385
445 +hsync -vsync
(==) ATI(3): DPI set to (75, 75)
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Reloading /usr/X11R6/lib/modules/libxaa.a
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Reloading /usr/X11R6/lib/modules/libramdac.a
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Reloading /usr/X11R6/lib/modules/libfb.a
Fatal server error:
Inconsistent display bitmapScanlineUnit. Exiting
When reporting a problem related to a server crash, please send
the full server output, not just the last messages.
This can be found in the log file "/var/log/XFree86.0.log".
Please report problems to [EMAIL PROTECTED]
_______________________________________________
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86
