You may need a newer version of X (X4.3) than the one provided with RH 7.3 (X 4.0.3) Lionel --- Curtis Chase <[EMAIL PROTECTED]> wrote: > > > I'm having a problem getting XFree86 X server to start on a RedHat 7.3 > installation on a system built with a Soyo SY-P4I 845 PE Lite > motherboard, 2.4GHz P4 CPU, 512 MBytes memory. The video card is an > ATI Radeon 9000 64MB AGP4xAGP/64MB [EMAIL PROTECTED] and is installed in the > AGP slot of the motherboard. > > I downloaded driver RPM fglrx-glc22-4.2.0-2.5.1.i586.rpm from the > www.ati.com website and installed it. Following the instructions from the > ati website on using the above driver, I used 'fglrxconfig' to create > an /etc/X11/XF86Config-4 file (attached below as XF86Config-4.1). (By > the way, the fglrxconfig utility did away with the /etc/X11/XF86Config > file.) The resulting /var/log/XFree86.0.log file is attached below as > XFree86.0.log.1 and indicates the server crashes as a result of not > finding matching Device section for BusID PCI:1:0:0. > > I therefore modified the config file BusID parmeter to "PCI:1:0:0". > See attached file XF86Config-4.2 and its associated log file > XFree86.0.log.2. This time the server setup seems to progress further > but crashes when it is 'unable to acquire AGP, error "xf86_ENODEV"'. > > In both the above attempts the log file says the Primary Device is: > PCI 01:00:0. Because the fglrxconfig utility sets the BusID to > PCI:1:0:1, is it possible that if the Primary Device were the same, > would the server start? If so, how does one set the Primary Device? > > Any help would be greatly appreciated. > > Thanks, > Curtis Chase > > # File: XF86Config-4 > # File generated by fglrxconfig (C) ATI Research, a substitute for xf86config. > > # Note by ATI: the below copyright notice is there for servicing possibly > # pending third party rights on the file format and the instance of this file. > # > # Copyright (c) 1999 by The XFree86 Project, Inc. > # > # Permission is hereby granted, free of charge, to any person obtaining a > # copy of this software and associated documentation files (the "Software"), > # to deal in the Software without restriction, including without limitation > # the rights to use, copy, modify, merge, publish, distribute, sublicense, > # and/or sell copies of the Software, and to permit persons to whom the > # Software is furnished to do so, subject to the following conditions: > # > # The above copyright notice and this permission notice shall be included in > # all copies or substantial portions of the Software. > # > # THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR > # IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, > # FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL > # THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, > # WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF > # OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE > # SOFTWARE. > # > # Except as contained in this notice, the name of the XFree86 Project shall > # not be used in advertising or otherwise to promote the sale, use or other > # dealings in this Software without prior written authorization from the > # XFree86 Project. > # > > # ********************************************************************** > # Refer to the XF86Config(4/5) man page for details about the format of > # this file. > # ********************************************************************** > > # ********************************************************************** > # DRI Section > # ********************************************************************** > Section "dri" > # Access to OpenGL ICD is allowed for all users: > Mode 0666 > # Access to OpenGL ICD is restricted to a specific user group: > # Group 100 # users > # Mode 0660 > EndSection > > # ********************************************************************** > # Module section -- this section is used to specify > # which dynamically loadable modules to load. > # ********************************************************************** > # > Section "Module" > > # This loads the DBE extension module. > > Load "dbe" # Double buffer extension > > # This loads the miscellaneous extensions module, and disables > # initialisation of the XFree86-DGA extension within that module. > SubSection "extmod" > Option "omit xfree86-dga" # don't initialise the DGA extension > EndSubSection > > # This loads the Type1 and FreeType font modules > Load "type1" > Load "freetype" > > # This loads the GLX module > Load "glx" # libglx.a > Load "dri" # libdri.a > > EndSection > > # ********************************************************************** > # Files section. This allows default font and rgb paths to be set > # ********************************************************************** > > Section "Files" > > # The location of the RGB database. Note, this is the name of the > # file minus the extension (like ".txt" or ".db"). There is normally > # no need to change the default. > > RgbPath "/usr/X11R6/lib/X11/rgb" > > # Multiple FontPath entries are allowed (which are concatenated together), > # as well as specifying multiple comma-separated entries in one FontPath > # command (or a combination of both methods) > # > # If you don't have a floating point coprocessor and emacs, Mosaic or other > # programs take long to start up, try moving the Type1 and Speedo directory > # to the end of this list (or comment them out). > # > > FontPath "/usr/X11R6/lib/X11/fonts/local/" > FontPath "/usr/X11R6/lib/X11/fonts/misc/" > FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled" > FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled" > FontPath "/usr/X11R6/lib/X11/fonts/Type1/" > FontPath "/usr/X11R6/lib/X11/fonts/Speedo/" > FontPath "/usr/X11R6/lib/X11/fonts/75dpi/" > FontPath "/usr/X11R6/lib/X11/fonts/100dpi/" > > # The module search path. The default path is shown here. > > # ModulePath "/usr/X11R6/lib/modules" > > EndSection > > # ********************************************************************** > # Server flags section. > # ********************************************************************** > > Section "ServerFlags" > > # Uncomment this to cause a core dump at the spot where a signal is > # received. This may leave the console in an unusable state, but may > # provide a better stack trace in the core dump to aid in debugging > > # Option "NoTrapSignals" > > # Uncomment this to disable the <Crtl><Alt><BS> server abort sequence > # This allows clients to receive this key event. > > # Option "DontZap" > > # Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching > # sequences. This allows clients to receive these key events. > > # Option "Dont Zoom" > > # Uncomment this to disable tuning with the xvidtune client. With > # it the client can still run and fetch card and monitor attributes, > # but it will not be allowed to change them. If it tries it will > # receive a protocol error. > > # Option "DisableVidModeExtension" > > # Uncomment this to enable the use of a non-local xvidtune client. > > # Option "AllowNonLocalXvidtune" > > # Uncomment this to disable dynamically modifying the input device > # (mouse and keyboard) settings. > > # Option "DisableModInDev" > > # Uncomment this to enable the use of a non-local client to > # change the keyboard or mouse settings (currently only xset). > > # Option "AllowNonLocalModInDev" > > EndSection > > # ********************************************************************** > # Input devices > # ********************************************************************** > > # ********************************************************************** > # Core keyboard's InputDevice section > # ********************************************************************** > > Section "InputDevice" > > Identifier "Keyboard1" > Driver "Keyboard" > # For most OSs the protocol can be omitted (it defaults to "Standard"). > # When using XQUEUE (only for SVR3 and SVR4, but not Solaris), > # uncomment the following line. > > # Option "Protocol" "Xqueue" > > Option "AutoRepeat" "500 30" > > # Specify which keyboard LEDs can be user-controlled (eg, with xset(1)) > # Option "Xleds" "1 2 3" > > # Option "LeftAlt" "Meta" > # Option "RightAlt" "ModeShift" > > # To customise the XKB settings to suit your keyboard, modify the > # lines below (which are the defaults). For example, for a non-U.S. > # keyboard, you will probably want to use: > # Option "XkbModel" "pc102" > # If you have a US Microsoft Natural keyboard, you can use: > # Option "XkbModel" "microsoft" > # > # Then to change the language, change the Layout setting. > # For example, a german layout can be obtained with: > # Option "XkbLayout" "de" > # or: > # Option "XkbLayout" "de" > # Option "XkbVariant" "nodeadkeys" > # > # If you'd like to switch the positions of your capslock and > # control keys, use: > # Option "XkbOptions" "ctrl:swapcaps" > > # These are the default XKB settings for XFree86 > === message truncated ===> > XFree86 Version 4.2.0 (Red Hat Linux release: 4.2.0-8) / X Window System > (protocol Version 11, revision 0, vendor release 6600) > Release Date: 23 January 2002 > If the server is older than 6-12 months, or if your card is > newer than the above date, look for a newer version before > reporting problems. (See http://www.XFree86.Org/) > Build Operating System: Linux 2.4.17-0.13smp i686 [ELF] > Build Host: daffy.perf.redhat.com > > Module Loader present > Markers: (--) probed, (**) from config file, (==) default setting, > (++) from command line, (!!) notice, (II) informational, > (WW) warning, (EE) error, (NI) not implemented, (??) unknown. > (==) Log file: "/var/log/XFree86.0.log", Time: Thu Jun 12 11:14:04 2003 > (==) Using config file: "/etc/X11/XF86Config-4" > (==) ServerLayout "Server Layout" > (**) |-->Screen "Screen0" (0) > (**) | |-->Monitor "Monitor0" > (**) | |-->Device "ATI Graphics Adapter" > (**) |-->Input Device "Mouse1" > (**) |-->Input Device "Keyboard1" > (**) Option "AutoRepeat" "500 30" > (**) Option "XkbRules" "xfree86" > (**) XKB: rules: "xfree86" > (**) Option "XkbModel" "pc105" > (**) XKB: model: "pc105" > (**) Option "XkbLayout" "us" > (**) XKB: layout: "us" > (==) Keyboard: CustomKeycode disabled > (WW) `fonts.dir' not found (or not valid) in "/usr/X11R6/lib/X11/fonts/local/". > Entry deleted from font path. > (Run 'mkfontdir' on "/usr/X11R6/lib/X11/fonts/local/"). > (**) FontPath set to > "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/" > (**) RgbPath set to "/usr/X11R6/lib/X11/rgb" > (==) ModulePath set to "/usr/X11R6/lib/modules" > (--) using VT number 7 > > (II) Open APM successful > (II) Module ABI versions: > XFree86 ANSI C Emulation: 0.1 > XFree86 Video Driver: 0.5 > XFree86 XInput driver : 0.3 > XFree86 Server Extension : 0.1 > XFree86 Font Renderer : 0.3 > (II) Loader running on linux > (II) LoadModule: "bitmap" > (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a > (II) Module bitmap: vendor="The XFree86 Project" > compiled for 4.2.0, module version = 1.0.0 > Module class: XFree86 Font Renderer > ABI class: XFree86 Font Renderer, version 0.3 > (II) Loading font Bitmap > (II) LoadModule: "pcidata" > (II) Loading /usr/X11R6/lib/modules/libpcidata.a > (II) Module pcidata: vendor="The XFree86 Project" > compiled for 4.2.0, module version = 0.1.0 > ABI class: XFree86 Video Driver, version 0.5 > (II) PCI: Probing config type using method 1 > (II) PCI: Config type is 1 > (II) PCI: stages = 0x03, oldVal1 = 0x80000090, mode1Res1 = 0x80000000 > (II) PCI: PCI scan (all values are in hex) > (II) PCI: 00:00:0: chip 8086,2560 card 8086,2560 rev 02 class 06,00,00 hdr 00 > (II) PCI: 00:01:0: chip 8086,2561 card 0000,0000 rev 02 class 06,04,00 hdr 01 > (II) PCI: 00:1d:0: chip 8086,24c2 card 8086,24c2 rev 02 class 0c,03,00 hdr 80 > (II) PCI: 00:1d:1: chip 8086,24c4 card 8086,24c2 rev 02 class 0c,03,00 hdr 00 > (II) PCI: 00:1d:2: chip 8086,24c7 card 8086,24c2 rev 02 class 0c,03,00 hdr 00 > (II) PCI: 00:1d:7: chip 8086,24cd card 8086,24cd rev 02 class 0c,03,20 hdr 00 > (II) PCI: 00:1e:0: chip 8086,244e card 0000,0000 rev 82 class 06,04,00 hdr 01 > (II) PCI: 00:1f:0: chip 8086,24c0 card 0000,0000 rev 02 class 06,01,00 hdr 80 > (II) PCI: 00:1f:1: chip 8086,24cb card 8086,24c2 rev 02 class 01,01,8a hdr 00 > (II) PCI: 00:1f:3: chip 8086,24c3 card 8086,24c2 rev 02 class 0c,05,00 hdr 00 > (II) PCI: 00:1f:5: chip 8086,24c5 card 434d,4941 rev 02 class 04,01,00 hdr 00 > (II) PCI: 01:00:0: chip 1002,4966 card 1002,2002 rev 01 class 03,00,00 hdr 80 > (II) PCI: 01:00:1: chip 1002,496e card 1002,2003 rev 01 class 03,80,00 hdr 00 > (II) PCI: 02:07:0: chip 1282,9102 card 0291,8212 rev 40 class 02,00,00 hdr 00 > (II) PCI: End of PCI scan > (II) LoadModule: "scanpci" > (II) Loading /usr/X11R6/lib/modules/libscanpci.a > (II) Module scanpci: vendor="The XFree86 Project" > compiled for 4.2.0, module version = 0.1.0 > ABI class: XFree86 Video Driver, version 0.5 > (II) UnloadModule: "scanpci" > (II) Unloading /usr/X11R6/lib/modules/libscanpci.a > (II) Host-to-PCI bridge: > (II) PCI-to-ISA bridge: > (II) PCI-to-PCI bridge: > (II) PCI-to-PCI bridge: > (II) Bus 0: bridge is at (0:0:0), (-1,0,0), BCTRL: 0x08 (VGA_EN is set) > (II) Bus 0 I/O range: > [0] -1 0x00000000 - 0x0000ffff (0x10000) IX[B] > (II) Bus 0 non-prefetchable memory range: > [0] -1 0x00000000 - 0xffffffff (0x0) MX[B] > (II) Bus 0 prefetchable memory range: > [0] -1 0x00000000 - 0xffffffff (0x0) MX[B] > (II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x0c (VGA_EN is set) > (II) Bus 1 I/O range: > [0] -1 0x00009000 - 0x000090ff (0x100) IX[B] > [1] -1 0x00009400 - 0x000094ff (0x100) IX[B] > [2] -1 0x00009800 - 0x000098ff (0x100) IX[B] > [3] -1 0x00009c00 - 0x00009cff (0x100) IX[B] > (II) Bus 1 non-prefetchable memory range: > [0] -1 0xec000000 - 0xec0fffff (0x100000) MX[B] > (II) Bus 1 prefetchable memory range: > [0] -1 0xe4000000 - 0xebffffff (0x8000000) MX[B] > (II) Bus 2: bridge is at (0:30:0), (0,2,2), BCTRL: 0x06 (VGA_EN is cleared) > (II) Bus 2 I/O range: > [0] -1 0x0000a000 - 0x0000a0ff (0x100) IX[B] > [1] -1 0x0000a400 - 0x0000a4ff (0x100) IX[B] > [2] -1 0x0000a800 - 0x0000a8ff (0x100) IX[B] > [3] -1 0x0000ac00 - 0x0000acff (0x100) IX[B] > (II) Bus 2 non-prefetchable memory range: > [0] -1 0xec100000 - 0xec1fffff (0x100000) MX[B] > (II) Bus 2 prefetchable memory range: > (II) Bus -1: bridge is at (0:31:0), (0,-1,0), BCTRL: 0x08 (VGA_EN is set) > (II) Bus -1 I/O range: > (II) Bus -1 non-prefetchable memory range: > (II) Bus -1 prefetchable memory range: > (--) PCI:*(1:0:0) ATI unknown chipset (0x4966) rev 1, Mem @ 0xe4000000/26, > 0xec020000/16, I/O @ > 0x9000/8 > (--) PCI: (1:0:1) ATI unknown chipset (0x496e) rev 1, Mem @ 0xe8000000/26, > 0xec030000/16 > (II) Addressable bus resource ranges are > [0] -1 0x00000000 - 0xffffffff (0x0) MX[B] > [1] -1 0x00000000 - 0x0000ffff (0x10000) IX[B] > (II) OS-reported resource ranges: > [0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B) > [1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) > [2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B] > [3] -1 0x000c0000 - 0x000effff (0x30000) MX[B] > [4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B] > [5] -1 0x0000ffff - 0x0000ffff (0x1) IX[B] > [6] -1 0x00000000 - 0x000000ff (0x100) IX[B] > (II) Active PCI resource ranges: > [0] -1 0xec140000 - 0xec1400ff (0x100) MX[B] > [1] -1 0xec202000 - 0xec2020ff (0x100) MX[B] > [2] -1 0xec201000 - 0xec2011ff (0x200) MX[B] > [3] -1 0x20000000 - 0x200003ff (0x400) MX[B] > [4] -1 0xec200000 - 0xec2003ff (0x400) MX[B] > [5] -1 0xe0000000 - 0xe3ffffff (0x4000000) MX[B] > [6] -1 0xec020000 - 0xec02ffff (0x10000) MX[B](B) > [7] -1 0xe4000000 - 0xe7ffffff (0x4000000) MX[B](B) > [8] -1 0x0000a000 - 0x0000a0ff (0x100) IX[B] > [9] -1 0x0000c400 - 0x0000c43f (0x40) IX[B] > [10] -1 0x0000c000 - 0x0000c0ff (0x100) IX[B] > [11] -1 0x00000500 - 0x0000051f (0x20) IX[B] > [12] -1 0x0000f000 - 0x0000f00f (0x10) IX[B] > [13] -1 0x0000b400 - 0x0000b41f (0x20) IX[B] > [14] -1 0x0000b000 - 0x0000b01f (0x20) IX[B] > [15] -1 0x0000b800 - 0x0000b81f (0x20) IX[B] > [16] -1 0x00009000 - 0x000090ff (0x100) IX[B](B) > (II) Inactive PCI resource ranges: > [0] -1 0xec030000 - 0xec03ffff (0x10000) MX[B](B) > [1] -1 0xe8000000 - 0xebffffff (0x4000000) MX[B](B) > (II) Active PCI resource ranges after removing overlaps: > [0] -1 0xec140000 - 0xec1400ff (0x100) MX[B] > [1] -1 0xec202000 - 0xec2020ff (0x100) MX[B] > [2] -1 0xec201000 - 0xec2011ff (0x200) MX[B] > [3] -1 0x20000000 - 0x200003ff (0x400) MX[B] > [4] -1 0xec200000 - 0xec2003ff (0x400) MX[B] > [5] -1 0xe0000000 - 0xe3ffffff (0x4000000) MX[B] > [6] -1 0xec020000 - 0xec02ffff (0x10000) MX[B](B) > [7] -1 0xe4000000 - 0xe7ffffff (0x4000000) MX[B](B) > [8] -1 0x0000a000 - 0x0000a0ff (0x100) IX[B] > [9] -1 0x0000c400 - 0x0000c43f (0x40) IX[B] > [10] -1 0x0000c000 - 0x0000c0ff (0x100) IX[B] > [11] -1 0x00000500 - 0x0000051f (0x20) IX[B] > [12] -1 0x0000f000 - 0x0000f00f (0x10) IX[B] > [13] -1 0x0000b400 - 0x0000b41f (0x20) IX[B] > [14] -1 0x0000b000 - 0x0000b01f (0x20) IX[B] > [15] -1 0x0000b800 - 0x0000b81f (0x20) IX[B] > [16] -1 0x00009000 - 0x000090ff (0x100) IX[B](B) > (II) Inactive PCI resource ranges after removing overlaps: > [0] -1 0xec030000 - 0xec03ffff (0x10000) MX[B](B) > [1] -1 0xe8000000 - 0xebffffff (0x4000000) MX[B](B) > (II) OS-reported resource ranges after removing overlaps with PCI: > [0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B) > [1] -1 0x00100000 - 0x1fffffff (0x1ff00000) MX[B]E(B) > [2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B] > [3] -1 0x000c0000 - 0x000effff (0x30000) MX[B] > [4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B] > [5] -1 0x0000ffff - 0x0000ffff (0x1) IX[B] > [6] -1 0x00000000 - 0x000000ff (0x100) IX[B] > (II) All system resource ranges: > [0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B) > [1] -1 0x00100000 - 0x1fffffff (0x1ff00000) MX[B]E(B) > [2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B] > [3] -1 0x000c0000 - 0x000effff (0x30000) MX[B] > [4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B] > [5] -1 0xec140000 - 0xec1400ff (0x100) MX[B] > [6] -1 0xec202000 - 0xec2020ff (0x100) MX[B] > [7] -1 0xec201000 - 0xec2011ff (0x200) MX[B] > [8] -1 0x20000000 - 0x200003ff (0x400) MX[B] > [9] -1 0xec200000 - 0xec2003ff (0x400) MX[B] > [10] -1 0xe0000000 - 0xe3ffffff (0x4000000) MX[B] > [11] -1 0xec020000 - 0xec02ffff (0x10000) MX[B](B) > [12] -1 0xe4000000 - 0xe7ffffff (0x4000000) MX[B](B) > [13] -1 0xec030000 - 0xec03ffff (0x10000) MX[B](B) > [14] -1 0xe8000000 - 0xebffffff (0x4000000) MX[B](B) > [15] -1 0x0000ffff - 0x0000ffff (0x1) IX[B] > [16] -1 0x00000000 - 0x000000ff (0x100) IX[B] > === message truncated ===> # File: XF86Config-4 > # File generated by fglrxconfig (C) ATI Research, a substitute for xf86config. > > # Note by ATI: the below copyright notice is there for servicing possibly > # pending third party rights on the file format and the instance of this file. > # > # Copyright (c) 1999 by The XFree86 Project, Inc. > # > # Permission is hereby granted, free of charge, to any person obtaining a > # copy of this software and associated documentation files (the "Software"), > # to deal in the Software without restriction, including without limitation > # the rights to use, copy, modify, merge, publish, distribute, sublicense, > # and/or sell copies of the Software, and to permit persons to whom the > # Software is furnished to do so, subject to the following conditions: > # > # The above copyright notice and this permission notice shall be included in > # all copies or substantial portions of the Software. > # > # THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR > # IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, > # FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL > # THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, > # WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF > # OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE > # SOFTWARE. > # > # Except as contained in this notice, the name of the XFree86 Project shall > # not be used in advertising or otherwise to promote the sale, use or other > # dealings in this Software without prior written authorization from the > # XFree86 Project. > # > > # ********************************************************************** > # Refer to the XF86Config(4/5) man page for details about the format of > # this file. > # ********************************************************************** > > # ********************************************************************** > # DRI Section > # ********************************************************************** > Section "dri" > # Access to OpenGL ICD is allowed for all users: > Mode 0666 > # Access to OpenGL ICD is restricted to a specific user group: > # Group 100 # users > # Mode 0660 > EndSection > > # ********************************************************************** > # Module section -- this section is used to specify > # which dynamically loadable modules to load. > # ********************************************************************** > # > Section "Module" > > # This loads the DBE extension module. > > Load "dbe" # Double buffer extension > > # This loads the miscellaneous extensions module, and disables > # initialisation of the XFree86-DGA extension within that module. > SubSection "extmod" > Option "omit xfree86-dga" # don't initialise the DGA extension > EndSubSection > > # This loads the Type1 and FreeType font modules > Load "type1" > Load "freetype" > > # This loads the GLX module > Load "glx" # libglx.a > Load "dri" # libdri.a > > EndSection > > # ********************************************************************** > # Files section. This allows default font and rgb paths to be set > # ********************************************************************** > > Section "Files" > > # The location of the RGB database. Note, this is the name of the > # file minus the extension (like ".txt" or ".db"). There is normally > # no need to change the default. > > RgbPath "/usr/X11R6/lib/X11/rgb" > > # Multiple FontPath entries are allowed (which are concatenated together), > # as well as specifying multiple comma-separated entries in one FontPath > # command (or a combination of both methods) > # > # If you don't have a floating point coprocessor and emacs, Mosaic or other > # programs take long to start up, try moving the Type1 and Speedo directory > # to the end of this list (or comment them out). > # > > FontPath "/usr/X11R6/lib/X11/fonts/local/" > FontPath "/usr/X11R6/lib/X11/fonts/misc/" > FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled" > FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled" > FontPath "/usr/X11R6/lib/X11/fonts/Type1/" > FontPath "/usr/X11R6/lib/X11/fonts/Speedo/" > FontPath "/usr/X11R6/lib/X11/fonts/75dpi/" > FontPath "/usr/X11R6/lib/X11/fonts/100dpi/" > > # The module search path. The default path is shown here. > > # ModulePath "/usr/X11R6/lib/modules" > > EndSection > > # ********************************************************************** > # Server flags section. > # ********************************************************************** > > Section "ServerFlags" > > # Uncomment this to cause a core dump at the spot where a signal is > # received. This may leave the console in an unusable state, but may > # provide a better stack trace in the core dump to aid in debugging > > # Option "NoTrapSignals" > > # Uncomment this to disable the <Crtl><Alt><BS> server abort sequence > # This allows clients to receive this key event. > > # Option "DontZap" > > # Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching > # sequences. This allows clients to receive these key events. > > # Option "Dont Zoom" > > # Uncomment this to disable tuning with the xvidtune client. With > # it the client can still run and fetch card and monitor attributes, > # but it will not be allowed to change them. If it tries it will > # receive a protocol error. > > # Option "DisableVidModeExtension" > > # Uncomment this to enable the use of a non-local xvidtune client. > > # Option "AllowNonLocalXvidtune" > > # Uncomment this to disable dynamically modifying the input device > # (mouse and keyboard) settings. > > # Option "DisableModInDev" > > # Uncomment this to enable the use of a non-local client to > # change the keyboard or mouse settings (currently only xset). > > # Option "AllowNonLocalModInDev" > > EndSection > > # ********************************************************************** > # Input devices > # ********************************************************************** > > # ********************************************************************** > # Core keyboard's InputDevice section > # ********************************************************************** > > Section "InputDevice" > > Identifier "Keyboard1" > Driver "Keyboard" > # For most OSs the protocol can be omitted (it defaults to "Standard"). > # When using XQUEUE (only for SVR3 and SVR4, but not Solaris), > # uncomment the following line. > > # Option "Protocol" "Xqueue" > > Option "AutoRepeat" "500 30" > > # Specify which keyboard LEDs can be user-controlled (eg, with xset(1)) > # Option "Xleds" "1 2 3" > > # Option "LeftAlt" "Meta" > # Option "RightAlt" "ModeShift" > > # To customise the XKB settings to suit your keyboard, modify the > # lines below (which are the defaults). For example, for a non-U.S. > # keyboard, you will probably want to use: > # Option "XkbModel" "pc102" > # If you have a US Microsoft Natural keyboard, you can use: > # Option "XkbModel" "microsoft" > # > # Then to change the language, change the Layout setting. > # For example, a german layout can be obtained with: > # Option "XkbLayout" "de" > # or: > # Option "XkbLayout" "de" > # Option "XkbVariant" "nodeadkeys" > # > # If you'd like to switch the positions of your capslock and > # control keys, use: > # Option "XkbOptions" "ctrl:swapcaps" > > # These are the default XKB settings for XFree86 > === message truncated ===> > XFree86 Version 4.2.0 (Red Hat Linux release: 4.2.0-8) / X Window System > (protocol Version 11, revision 0, vendor release 6600) > Release Date: 23 January 2002 > If the server is older than 6-12 months, or if your card is > newer than the above date, look for a newer version before > reporting problems. (See http://www.XFree86.Org/) > Build Operating System: Linux 2.4.17-0.13smp i686 [ELF] > Build Host: daffy.perf.redhat.com > > Module Loader present > Markers: (--) probed, (**) from config file, (==) default setting, > (++) from command line, (!!) notice, (II) informational, > (WW) warning, (EE) error, (NI) not implemented, (??) unknown. > (==) Log file: "/var/log/XFree86.0.log", Time: Fri Jun 13 10:18:46 2003 > (==) Using config file: "/etc/X11/XF86Config-4" > (==) ServerLayout "Server Layout" > (**) |-->Screen "Screen0" (0) > (**) | |-->Monitor "Monitor0" > (**) | |-->Device "ATI Graphics Adapter" > (**) |-->Input Device "Mouse1" > (**) |-->Input Device "Keyboard1" > (**) Option "AutoRepeat" "500 30" > (**) Option "XkbRules" "xfree86" > (**) XKB: rules: "xfree86" > (**) Option "XkbModel" "pc105" > (**) XKB: model: "pc105" > (**) Option "XkbLayout" "us" > (**) XKB: layout: "us" > (==) Keyboard: CustomKeycode disabled > (WW) `fonts.dir' not found (or not valid) in "/usr/X11R6/lib/X11/fonts/local/". > Entry deleted from font path. > (Run 'mkfontdir' on "/usr/X11R6/lib/X11/fonts/local/"). > (**) FontPath set to > "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/" > (**) RgbPath set to "/usr/X11R6/lib/X11/rgb" > (==) ModulePath set to "/usr/X11R6/lib/modules" > (--) using VT number 7 > > (II) Open APM successful > (II) Module ABI versions: > XFree86 ANSI C Emulation: 0.1 > XFree86 Video Driver: 0.5 > XFree86 XInput driver : 0.3 > XFree86 Server Extension : 0.1 > XFree86 Font Renderer : 0.3 > (II) Loader running on linux > (II) LoadModule: "bitmap" > (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a > (II) Module bitmap: vendor="The XFree86 Project" > compiled for 4.2.0, module version = 1.0.0 > Module class: XFree86 Font Renderer > ABI class: XFree86 Font Renderer, version 0.3 > (II) Loading font Bitmap > (II) LoadModule: "pcidata" > (II) Loading /usr/X11R6/lib/modules/libpcidata.a > (II) Module pcidata: vendor="The XFree86 Project" > compiled for 4.2.0, module version = 0.1.0 > ABI class: XFree86 Video Driver, version 0.5 > (II) PCI: Probing config type using method 1 > (II) PCI: Config type is 1 > (II) PCI: stages = 0x03, oldVal1 = 0x80000090, mode1Res1 = 0x80000000 > (II) PCI: PCI scan (all values are in hex) > (II) PCI: 00:00:0: chip 8086,2560 card 8086,2560 rev 02 class 06,00,00 hdr 00 > (II) PCI: 00:01:0: chip 8086,2561 card 0000,0000 rev 02 class 06,04,00 hdr 01 > (II) PCI: 00:1d:0: chip 8086,24c2 card 8086,24c2 rev 02 class 0c,03,00 hdr 80 > (II) PCI: 00:1d:1: chip 8086,24c4 card 8086,24c2 rev 02 class 0c,03,00 hdr 00 > (II) PCI: 00:1d:2: chip 8086,24c7 card 8086,24c2 rev 02 class 0c,03,00 hdr 00 > (II) PCI: 00:1d:7: chip 8086,24cd card 8086,24cd rev 02 class 0c,03,20 hdr 00 > (II) PCI: 00:1e:0: chip 8086,244e card 0000,0000 rev 82 class 06,04,00 hdr 01 > (II) PCI: 00:1f:0: chip 8086,24c0 card 0000,0000 rev 02 class 06,01,00 hdr 80 > (II) PCI: 00:1f:1: chip 8086,24cb card 8086,24c2 rev 02 class 01,01,8a hdr 00 > (II) PCI: 00:1f:3: chip 8086,24c3 card 8086,24c2 rev 02 class 0c,05,00 hdr 00 > (II) PCI: 00:1f:5: chip 8086,24c5 card 434d,4941 rev 02 class 04,01,00 hdr 00 > (II) PCI: 01:00:0: chip 1002,4966 card 1002,2002 rev 01 class 03,00,00 hdr 80 > (II) PCI: 01:00:1: chip 1002,496e card 1002,2003 rev 01 class 03,80,00 hdr 00 > (II) PCI: 02:07:0: chip 1282,9102 card 0291,8212 rev 40 class 02,00,00 hdr 00 > (II) PCI: End of PCI scan > (II) LoadModule: "scanpci" > (II) Loading /usr/X11R6/lib/modules/libscanpci.a > (II) Module scanpci: vendor="The XFree86 Project" > compiled for 4.2.0, module version = 0.1.0 > ABI class: XFree86 Video Driver, version 0.5 > (II) UnloadModule: "scanpci" > (II) Unloading /usr/X11R6/lib/modules/libscanpci.a > (II) Host-to-PCI bridge: > (II) PCI-to-ISA bridge: > (II) PCI-to-PCI bridge: > (II) PCI-to-PCI bridge: > (II) Bus 0: bridge is at (0:0:0), (-1,0,0), BCTRL: 0x08 (VGA_EN is set) > (II) Bus 0 I/O range: > [0] -1 0x00000000 - 0x0000ffff (0x10000) IX[B] > (II) Bus 0 non-prefetchable memory range: > [0] -1 0x00000000 - 0xffffffff (0x0) MX[B] > (II) Bus 0 prefetchable memory range: > [0] -1 0x00000000 - 0xffffffff (0x0) MX[B] > (II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x0c (VGA_EN is set) > (II) Bus 1 I/O range: > [0] -1 0x00009000 - 0x000090ff (0x100) IX[B] > [1] -1 0x00009400 - 0x000094ff (0x100) IX[B] > [2] -1 0x00009800 - 0x000098ff (0x100) IX[B] > [3] -1 0x00009c00 - 0x00009cff (0x100) IX[B] > (II) Bus 1 non-prefetchable memory range: > [0] -1 0xec000000 - 0xec0fffff (0x100000) MX[B] > (II) Bus 1 prefetchable memory range: > [0] -1 0xe4000000 - 0xebffffff (0x8000000) MX[B] > (II) Bus 2: bridge is at (0:30:0), (0,2,2), BCTRL: 0x06 (VGA_EN is cleared) > (II) Bus 2 I/O range: > [0] -1 0x0000a000 - 0x0000a0ff (0x100) IX[B] > [1] -1 0x0000a400 - 0x0000a4ff (0x100) IX[B] > [2] -1 0x0000a800 - 0x0000a8ff (0x100) IX[B] > [3] -1 0x0000ac00 - 0x0000acff (0x100) IX[B] > (II) Bus 2 non-prefetchable memory range: > [0] -1 0xec100000 - 0xec1fffff (0x100000) MX[B] > (II) Bus 2 prefetchable memory range: > (II) Bus -1: bridge is at (0:31:0), (0,-1,0), BCTRL: 0x08 (VGA_EN is set) > (II) Bus -1 I/O range: > (II) Bus -1 non-prefetchable memory range: > (II) Bus -1 prefetchable memory range: > (--) PCI:*(1:0:0) ATI unknown chipset (0x4966) rev 1, Mem @ 0xe4000000/26, > 0xec020000/16, I/O @ > 0x9000/8 > (--) PCI: (1:0:1) ATI unknown chipset (0x496e) rev 1, Mem @ 0xe8000000/26, > 0xec030000/16 > (II) Addressable bus resource ranges are > [0] -1 0x00000000 - 0xffffffff (0x0) MX[B] > [1] -1 0x00000000 - 0x0000ffff (0x10000) IX[B] > (II) OS-reported resource ranges: > [0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B) > [1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) > [2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B] > [3] -1 0x000c0000 - 0x000effff (0x30000) MX[B] > [4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B] > [5] -1 0x0000ffff - 0x0000ffff (0x1) IX[B] > [6] -1 0x00000000 - 0x000000ff (0x100) IX[B] > (II) Active PCI resource ranges: > [0] -1 0xec140000 - 0xec1400ff (0x100) MX[B] > [1] -1 0xec202000 - 0xec2020ff (0x100) MX[B] > [2] -1 0xec201000 - 0xec2011ff (0x200) MX[B] > [3] -1 0x20000000 - 0x200003ff (0x400) MX[B] > [4] -1 0xec200000 - 0xec2003ff (0x400) MX[B] > [5] -1 0xe0000000 - 0xe3ffffff (0x4000000) MX[B] > [6] -1 0xec020000 - 0xec02ffff (0x10000) MX[B](B) > [7] -1 0xe4000000 - 0xe7ffffff (0x4000000) MX[B](B) > [8] -1 0x0000a000 - 0x0000a0ff (0x100) IX[B] > [9] -1 0x0000c400 - 0x0000c43f (0x40) IX[B] > [10] -1 0x0000c000 - 0x0000c0ff (0x100) IX[B] > [11] -1 0x00000500 - 0x0000051f (0x20) IX[B] > [12] -1 0x0000f000 - 0x0000f00f (0x10) IX[B] > [13] -1 0x0000b400 - 0x0000b41f (0x20) IX[B] > [14] -1 0x0000b000 - 0x0000b01f (0x20) IX[B] > [15] -1 0x0000b800 - 0x0000b81f (0x20) IX[B] > [16] -1 0x00009000 - 0x000090ff (0x100) IX[B](B) > (II) Inactive PCI resource ranges: > [0] -1 0xec030000 - 0xec03ffff (0x10000) MX[B](B) > [1] -1 0xe8000000 - 0xebffffff (0x4000000) MX[B](B) > (II) Active PCI resource ranges after removing overlaps: > [0] -1 0xec140000 - 0xec1400ff (0x100) MX[B] > [1] -1 0xec202000 - 0xec2020ff (0x100) MX[B] > [2] -1 0xec201000 - 0xec2011ff (0x200) MX[B] > [3] -1 0x20000000 - 0x200003ff (0x400) MX[B] > [4] -1 0xec200000 - 0xec2003ff (0x400) MX[B] > [5] -1 0xe0000000 - 0xe3ffffff (0x4000000) MX[B] > [6] -1 0xec020000 - 0xec02ffff (0x10000) MX[B](B) > [7] -1 0xe4000000 - 0xe7ffffff (0x4000000) MX[B](B) > [8] -1 0x0000a000 - 0x0000a0ff (0x100) IX[B] > [9] -1 0x0000c400 - 0x0000c43f (0x40) IX[B] > [10] -1 0x0000c000 - 0x0000c0ff (0x100) IX[B] > [11] -1 0x00000500 - 0x0000051f (0x20) IX[B] > [12] -1 0x0000f000 - 0x0000f00f (0x10) IX[B] > [13] -1 0x0000b400 - 0x0000b41f (0x20) IX[B] > [14] -1 0x0000b000 - 0x0000b01f (0x20) IX[B] > [15] -1 0x0000b800 - 0x0000b81f (0x20) IX[B] > [16] -1 0x00009000 - 0x000090ff (0x100) IX[B](B) > (II) Inactive PCI resource ranges after removing overlaps: > [0] -1 0xec030000 - 0xec03ffff (0x10000) MX[B](B) > [1] -1 0xe8000000 - 0xebffffff (0x4000000) MX[B](B) > (II) OS-reported resource ranges after removing overlaps with PCI: > [0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B) > [1] -1 0x00100000 - 0x1fffffff (0x1ff00000) MX[B]E(B) > [2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B] > [3] -1 0x000c0000 - 0x000effff (0x30000) MX[B] > [4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B] > [5] -1 0x0000ffff - 0x0000ffff (0x1) IX[B] > [6] -1 0x00000000 - 0x000000ff (0x100) IX[B] > (II) All system resource ranges: > [0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B) > [1] -1 0x00100000 - 0x1fffffff (0x1ff00000) MX[B]E(B) > [2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B] > [3] -1 0x000c0000 - 0x000effff (0x30000) MX[B] > [4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B] > [5] -1 0xec140000 - 0xec1400ff (0x100) MX[B] > [6] -1 0xec202000 - 0xec2020ff (0x100) MX[B] > [7] -1 0xec201000 - 0xec2011ff (0x200) MX[B] > [8] -1 0x20000000 - 0x200003ff (0x400) MX[B] > [9] -1 0xec200000 - 0xec2003ff (0x400) MX[B] > [10] -1 0xe0000000 - 0xe3ffffff (0x4000000) MX[B] > [11] -1 0xec020000 - 0xec02ffff (0x10000) MX[B](B) > [12] -1 0xe4000000 - 0xe7ffffff (0x4000000) MX[B](B) > [13] -1 0xec030000 - 0xec03ffff (0x10000) MX[B](B) > [14] -1 0xe8000000 - 0xebffffff (0x4000000) MX[B](B) > [15] -1 0x0000ffff - 0x0000ffff (0x1) IX[B] > [16] -1 0x00000000 - 0x000000ff (0x100) IX[B] > === message truncated ===
__________________________________ Do you Yahoo!? SBC Yahoo! DSL - Now only $29.95 per month! http://sbc.yahoo.com _______________________________________________ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
