On Sunday, June 29, 2003 6:11 pm, Christian Hvid wrote: > I have been given the daunting task of setting up XFree on an Axiomtek > SBC84500. It has an absolutely minimal linux (embedix / Caldera): > > uname -a > Linux (none) 2.4.5-pre1 #25 Wed Jan 8 03:22:27 UTC 2003 i586 unknown > > (Not even the clock is set.)
Surely you can fix that. :^) > I have followed the instructions on > http://www.xfree.org/4.2.0/Install4.html#manual-install, I have run > XFree86 -configure but when I run XFree86 -xf86config > /root/XF86Config.new the screen shows some surreal graphics and it > stops with a bunch of error messages. Could you describe the display? Do you have a rolling screen, flickering, amorphous areas of wrong colors, or anything of the sort? Or are all the problems at the pixel level? What kind of monitor are you using, anyway? Does your card output to a VGA port, S-Video, composite, DVI, proprietary connection, what? > Can anyone give me an idea to what is wrong? The system is a little > shaky and runs on some old RAM - there might a problem there (shared > video ram). Have I messed up something in the installation or it is > just a mouse driver that is missing? Can you temporarily swap the RAM? If that fixes it, then that fixes it. If not, look elsewhere for the problem. > XFree86 Version 4.2.1 / X Window System Try 4.3.0, perhaps? > (++) Using config file: "/root/XF86Config.new" May we see this file? > (WW) Open APM failed (/dev/apm_bios) (No such file or directory) Does your kernel have support for this? If so, mknod the file in question. Read linux/Documentation/devices.txt for more information. > (II) PCI: 00:12:0: chip 1078,0100 card 0000,0000 rev 30 class 06,01,00 > hdr 80 > (II) VESA: driver for VESA chipsets: vesa > (II) Primary Device is: PCI 00:12:4 > (--) Chipset vesa found Does this card work with svgalib or fbcon? > (==) VESA(0): Depth 8, (==) framebuffer bpp 8 > (==) VESA(0): Default visual is PseudoColor Are you having palette problems, that is, wrong colors? > (II) VESA(0): VESA VBE DDC supported > (II) VESA(0): VESA VBE DDC Level 2 > (II) VESA(0): VESA VBE DDC transfer in appr. 3 sec. > (II) VESA(0): VESA VBE DDC read failed Again, what kind of monitor? > (--) VESA(0): Virtual size is 1280x1024 (pitch 1280) > (--) VESA(0): Default mode 640x400 (unnamed) > (--) VESA(0): Default mode 640x480 (unnamed) > (--) VESA(0): Default mode 800x600 (unnamed) > (--) VESA(0): Default mode 1024x768 (unnamed) > (--) VESA(0): Default mode 1280x1024 (unnamed) > (--) VESA(0): Default mode 320x200 (unnamed) > (--) VESA(0): Default mode 320x240 (unnamed) > (--) VESA(0): Default mode 400x300 (unnamed) > (--) VESA(0): Default mode 512x384 (unnamed) Which one do you use? > (**) VESA(0): Using "Shadow Framebuffer" Could this be the problem? > (WW) System lacks support for changing MTRRs Does your computer have MTRR support? If so, enable it in your kernel. > (**) Option "Device" "/dev/mouse" > (EE) xf86OpenSerial: Cannot open device /dev/mouse > No such file or directory. > (EE) Mouse0: cannot open input device > (EE) PreInit failed for input device "Mouse0" > (II) UnloadModule: "mouse" > (II) Keyboard "Keyboard0" handled by legacy driver > (WW) No core pointer registered > Couldn't load XKB keymap, falling back to pre-XKB keymap > No core pointer > > Fatal server error: > failed to initialize core devices Here's your showstopper. You don't have a /dev/mouse. If it's under a different name, adjust your XF86Config file. -- Andy Goth | [EMAIL PROTECTED] | http://ioioio.net/ End communication. _______________________________________________ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86