Just installed Slackware 9.0, and console mode works fine. The xf86cfg
programs works, too (graphically), so I can see that this system is
CAPABLE of running X. However, when I try to start the X Windows system
-- I get a crash (see the XFree86.0.log below -- XF86Config file also
included). Any insight would be appreciated!
=========================================================================
=================
XFree86.0.log
XFree86 Version 4.3.0
Release Date: 27 February 2003
X Protocol Version 11, Revision 0, Release 6.6
Build Operating System: Linux 2.4.20 i686 [ELF]
Build Date: 01 March 2003
Before reporting problems, check http://www.XFree86.Org/
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Thu Jul 31 12:07:53 2003
(==) Using config file: "/etc/X11/XF86Config"
(==) ServerLayout "Simple Layout"
(**) |-->Screen "Screen 1" (0)
(**) | |-->Monitor "MyFutura"
(**) | |-->Device "ONEMEGCHEAPVIDCARD"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xfree86"
(**) XKB: rules: "xfree86"
(**) Option "XkbModel" "pc105"
(**) XKB: model: "pc105"
(**) Option "XkbLayout" "us"
(**) XKB: layout: "us"
(==) Keyboard: CustomKeycode disabled
(WW) `fonts.dir' not found (or not valid) in
"/usr/X11R6/lib/X11/fonts/100dpi/".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/X11R6/lib/X11/fonts/100dpi/").
(WW) `fonts.dir' not found (or not valid) in
"/usr/X11R6/lib/X11/fonts/100dpi/".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/X11R6/lib/X11/fonts/100dpi/").
(**) FontPath set to
"/usr/X11R6/lib/X11/fonts/local/,/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R
6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11
R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/75dpi/"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(--) using VT number 7
(WW) Open APM failed (/dev/apm_bios) (No such device)
(II) Module ABI versions:
XFree86 ANSI C Emulation: 0.2
XFree86 Video Driver: 0.6
XFree86 XInput driver : 0.4
XFree86 Server Extension : 0.2
XFree86 Font Renderer : 0.4
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.6
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x00000000, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 1039,0620 card 0000,0000 rev 02 class 06,00,00
hdr 80
(II) PCI: 00:00:1: chip 1039,5513 card 0000,0000 rev d0 class 01,01,80
hdr 80
(II) PCI: 00:01:0: chip 1039,0008 card 0000,0000 rev b1 class 06,01,00
hdr 80
(II) PCI: 00:01:1: chip 1039,0009 card 0000,0000 rev 00 class ff,00,00
hdr 80
(II) PCI: 00:01:2: chip 1039,7001 card 0000,0000 rev 11 class 0c,03,10
hdr 80
(II) PCI: 00:02:0: chip 1039,0001 card 0000,0000 rev 00 class 06,04,00
hdr 01
(II) PCI: 00:09:0: chip 5333,8811 card 0000,0000 rev 54 class 03,00,00
hdr 00
(II) PCI: 00:0d:0: chip 1102,0004 card 1102,0051 rev 03 class 04,01,00
hdr 80
(II) PCI: 00:0d:1: chip 1102,7003 card 1102,0040 rev 03 class 09,80,00
hdr 80
(II) PCI: 00:0d:2: chip 1102,4001 card 1102,0010 rev 00 class 0c,00,10
hdr 80
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:1:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is
set)
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:2:0), (0,1,1), BCTRL: 0x0000 (VGA_EN is
cleared)
(--) PCI:*(0:9:0) S3 Inc. 86c764/765 [Trio32/64/64V+] rev 84, Mem @
0xe0000000/26, BIOS @ 0xe4000000/16
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) PCI Memory resource overlap reduced 0xe5000000 from 0xe53fffff to
0xe4ffffff
(II) Active PCI resource ranges:
[0] -1 0 0xe5400000 - 0xe5403fff (0x4000) MX[B]
[1] -1 0 0xe5404000 - 0xe54047ff (0x800) MX[B]
[2] -1 0 0xe5405000 - 0xe5405fff (0x1000) MX[B]
[3] -1 0 0xe5000000 - 0xe4ffffff (0x0) MX[B]O
[4] -1 0 0xe4000000 - 0xe400ffff (0x10000) MX[B](B)
[5] -1 0 0xe0000000 - 0xe3ffffff (0x4000000) MX[B](B)
[6] -1 0 0x0000e400 - 0x0000e407 (0x8) IX[B]
[7] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[B]
[8] -1 0 0x00004000 - 0x0000400f (0x10) IX[B]
[9] -1 0 0x00000374 - 0x00000374 (0x1) IX[B]
[10] -1 0 0x00000170 - 0x00000170 (0x1) IX[B]
[11] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[B]
[12] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xe5400000 - 0xe5403fff (0x4000) MX[B]
[1] -1 0 0xe5404000 - 0xe54047ff (0x800) MX[B]
[2] -1 0 0xe5405000 - 0xe5405fff (0x1000) MX[B]
[3] -1 0 0xe5000000 - 0xe4ffffff (0x0) MX[B]O
[4] -1 0 0xe4000000 - 0xe400ffff (0x10000) MX[B](B)
[5] -1 0 0xe0000000 - 0xe3ffffff (0x4000000) MX[B](B)
[6] -1 0 0x0000e400 - 0x0000e407 (0x8) IX[B]
[7] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[B]
[8] -1 0 0x00004000 - 0x0000400f (0x10) IX[B]
[9] -1 0 0x00000374 - 0x00000374 (0x1) IX[B]
[10] -1 0 0x00000170 - 0x00000170 (0x1) IX[B]
[11] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[B]
[12] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xe5400000 - 0xe5403fff (0x4000) MX[B]
[6] -1 0 0xe5404000 - 0xe54047ff (0x800) MX[B]
[7] -1 0 0xe5405000 - 0xe5405fff (0x1000) MX[B]
[8] -1 0 0xe5000000 - 0xe4ffffff (0x0) MX[B]O
[9] -1 0 0xe4000000 - 0xe400ffff (0x10000) MX[B](B)
[10] -1 0 0xe0000000 - 0xe3ffffff (0x4000000) MX[B](B)
[11] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[12] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[13] -1 0 0x0000e400 - 0x0000e407 (0x8) IX[B]
[14] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[B]
[15] -1 0 0x00004000 - 0x0000400f (0x10) IX[B]
[16] -1 0 0x00000374 - 0x00000374 (0x1) IX[B]
[17] -1 0 0x00000170 - 0x00000170 (0x1) IX[B]
[18] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[B]
[19] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.2
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "speedo"
(II) Loading /usr/X11R6/lib/modules/fonts/libspeedo.a
(II) Module speedo: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.1
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Speedo
(II) LoadModule: "vga"
(II) Loading /usr/X11R6/lib/modules/drivers/vga_drv.o
(II) Module vga: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 4.0.0
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
Module class: XFree86 XInput Driver
ABI class: XFree86 XInput driver, version 0.4
(II) VGA: Generic VGA driver (version 4.0) for chipsets: generic
(II) Primary Device is: PCI 00:09:0
(--) Assigning device section with no busID to primary device
(--) Chipset generic found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xe5400000 - 0xe5403fff (0x4000) MX[B]
[6] -1 0 0xe5404000 - 0xe54047ff (0x800) MX[B]
[7] -1 0 0xe5405000 - 0xe5405fff (0x1000) MX[B]
[8] -1 0 0xe5000000 - 0xe4ffffff (0x0) MX[B]O
[9] -1 0 0xe4000000 - 0xe400ffff (0x10000) MX[B](B)
[10] -1 0 0xe0000000 - 0xe3ffffff (0x4000000) MX[B](B)
[11] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[12] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[13] -1 0 0x0000e400 - 0x0000e407 (0x8) IX[B]
[14] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[B]
[15] -1 0 0x00004000 - 0x0000400f (0x10) IX[B]
[16] -1 0 0x00000374 - 0x00000374 (0x1) IX[B]
[17] -1 0 0x00000170 - 0x00000170 (0x1) IX[B]
[18] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[B]
[19] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
(II) resource ranges after probing:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xe5400000 - 0xe5403fff (0x4000) MX[B]
[6] -1 0 0xe5404000 - 0xe54047ff (0x800) MX[B]
[7] -1 0 0xe5405000 - 0xe5405fff (0x1000) MX[B]
[8] -1 0 0xe5000000 - 0xe4ffffff (0x0) MX[B]O
[9] -1 0 0xe4000000 - 0xe400ffff (0x10000) MX[B](B)
[10] -1 0 0xe0000000 - 0xe3ffffff (0x4000000) MX[B](B)
[11] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[12] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[13] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[14] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[15] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[16] -1 0 0x0000e400 - 0x0000e407 (0x8) IX[B]
[17] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[B]
[18] -1 0 0x00004000 - 0x0000400f (0x10) IX[B]
[19] -1 0 0x00000374 - 0x00000374 (0x1) IX[B]
[20] -1 0 0x00000170 - 0x00000170 (0x1) IX[B]
[21] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[B]
[22] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
[23] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[24] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.6
(II) VGA(0): initializing int10.
(II) VGA(0): Primary V_BIOS segment is: 0xc000
(**) VGA(0): Depth 16, (--) framebuffer bpp 16
(==) VGA(0): RGB weight 565
(==) VGA(0): Default visual is TrueColor
(==) VGA(0): Using gamma correction (1.0, 1.0, 1.0)
(==) VGA(0): videoRam: 256 kBytes.
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.6
(II) VGA(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is
0x0000
(--) VGA(0): Pixel clocks available:
(--) VGA(0): pixel clocks: 25.180 28.322 25.180 28.440
(II) VGA(0): MyFutura: Using hsync range of 30.00-95.00 kHz
(II) VGA(0): MyFutura: Using vrefresh range of 50.00-160.00 Hz
(II) VGA(0): Not using default mode "640x350" (insufficient memory for
mode)
(II) VGA(0): Not using default mode "640x400" (insufficient memory for
mode)
(II) VGA(0): Not using default mode "720x400" (insufficient memory for
mode)
(II) VGA(0): Not using default mode "640x480" (insufficient memory for
mode)
(II) VGA(0): Not using default mode "640x480" (insufficient memory for
mode)
(II) VGA(0): Not using default mode "640x480" (insufficient memory for
mode)
(II) VGA(0): Not using default mode "640x480" (insufficient memory for
mode)
(II) VGA(0): Not using default mode "800x600" (insufficient memory for
mode)
(II) VGA(0): Not using default mode "800x600" (insufficient memory for
mode)
(II) VGA(0): Not using default mode "800x600" (insufficient memory for
mode)
(II) VGA(0): Not using default mode "800x600" (insufficient memory for
mode)
(II) VGA(0): Not using default mode "800x600" (insufficient memory for
mode)
(II) VGA(0): Not using default mode "1024x768" (insufficient memory for
mode)
(II) VGA(0): Not using default mode "512x384" (insufficient memory for
mode)
(II) VGA(0): Not using default mode "1024x768" (insufficient memory for
mode)
(II) VGA(0): Not using default mode "512x384" (insufficient memory for
mode)
(II) VGA(0): Not using default mode "1024x768" (insufficient memory for
mode)
(II) VGA(0): Not using default mode "512x384" (insufficient memory for
mode)
(II) VGA(0): Not using default mode "1024x768" (insufficient memory for
mode)
(II) VGA(0): Not using default mode "512x384" (insufficient memory for
mode)
(II) VGA(0): Not using default mode "1024x768" (insufficient memory for
mode)
(II) VGA(0): Not using default mode "512x384" (insufficient memory for
mode)
(II) VGA(0): Not using default mode "1152x864" (insufficient memory for
mode)
(II) VGA(0): Not using default mode "576x432" (insufficient memory for
mode)
(II) VGA(0): Not using default mode "1280x960" (insufficient memory for
mode)
(II) VGA(0): Not using default mode "640x480" (insufficient memory for
mode)
(II) VGA(0): Not using default mode "1280x960" (insufficient memory for
mode)
(II) VGA(0): Not using default mode "640x480" (insufficient memory for
mode)
(II) VGA(0): Not using default mode "1280x1024" (insufficient memory for
mode)
(II) VGA(0): Not using default mode "640x512" (insufficient memory for
mode)
(II) VGA(0): Not using default mode "1280x1024" (insufficient memory for
mode)
(II) VGA(0): Not using default mode "640x512" (insufficient memory for
mode)
(II) VGA(0): Not using default mode "1280x1024" (insufficient memory for
mode)
(II) VGA(0): Not using default mode "640x512" (insufficient memory for
mode)
(II) VGA(0): Not using default mode "1600x1200" (insufficient memory for
mode)
(II) VGA(0): Not using default mode "800x600" (insufficient memory for
mode)
(II) VGA(0): Not using default mode "1600x1200" (insufficient memory for
mode)
(II) VGA(0): Not using default mode "800x600" (insufficient memory for
mode)
(II) VGA(0): Not using default mode "1600x1200" (insufficient memory for
mode)
(II) VGA(0): Not using default mode "800x600" (insufficient memory for
mode)
(II) VGA(0): Not using default mode "1600x1200" (insufficient memory for
mode)
(II) VGA(0): Not using default mode "800x600" (insufficient memory for
mode)
(II) VGA(0): Not using default mode "1600x1200" (insufficient memory for
mode)
(II) VGA(0): Not using default mode "800x600" (insufficient memory for
mode)
(II) VGA(0): Not using default mode "1792x1344" (insufficient memory for
mode)
(II) VGA(0): Not using default mode "896x672" (insufficient memory for
mode)
(II) VGA(0): Not using default mode "1792x1344" (insufficient memory for
mode)
(II) VGA(0): Not using default mode "896x672" (insufficient memory for
mode)
(II) VGA(0): Not using default mode "1856x1392" (insufficient memory for
mode)
(II) VGA(0): Not using default mode "928x696" (insufficient memory for
mode)
(II) VGA(0): Not using default mode "1856x1392" (insufficient memory for
mode)
(II) VGA(0): Not using default mode "928x696" (insufficient memory for
mode)
(II) VGA(0): Not using default mode "1920x1440" (insufficient memory for
mode)
(II) VGA(0): Not using default mode "960x720" (insufficient memory for
mode)
(II) VGA(0): Not using default mode "1920x1440" (insufficient memory for
mode)
(II) VGA(0): Not using default mode "960x720" (insufficient memory for
mode)
(II) VGA(0): Not using default mode "832x624" (insufficient memory for
mode)
(II) VGA(0): Not using default mode "1152x768" (insufficient memory for
mode)
(II) VGA(0): Not using default mode "576x384" (insufficient memory for
mode)
(II) VGA(0): Not using default mode "1400x1050" (insufficient memory for
mode)
(II) VGA(0): Not using default mode "700x525" (insufficient memory for
mode)
(II) VGA(0): Not using default mode "1400x1050" (insufficient memory for
mode)
(II) VGA(0): Not using default mode "700x525" (insufficient memory for
mode)
(II) VGA(0): Not using default mode "1600x1024" (insufficient memory for
mode)
(II) VGA(0): Not using default mode "800x512" (insufficient memory for
mode)
(II) VGA(0): Not using default mode "1920x1440" (insufficient memory for
mode)
(II) VGA(0): Not using default mode "960x720" (insufficient memory for
mode)
(II) VGA(0): Not using default mode "2048x1536" (insufficient memory for
mode)
(II) VGA(0): Not using default mode "1024x768" (insufficient memory for
mode)
(II) VGA(0): Not using default mode "2048x1536" (insufficient memory for
mode)
(II) VGA(0): Not using default mode "1024x768" (insufficient memory for
mode)
(II) VGA(0): Not using default mode "2048x1536" (insufficient memory for
mode)
(II) VGA(0): Not using default mode "1024x768" (insufficient memory for
mode)
(II) VGA(0): Not using mode "800x600" (no mode of this name)
(II) VGA(0): Not using mode "640x480" (no mode of this name)
(II) VGA(0): Not using default mode "416x312" (width too large for
virtual size)
(II) VGA(0): Not using default mode "400x300" (width too large for
virtual size)
(II) VGA(0): Not using default mode "400x300" (width too large for
virtual size)
(II) VGA(0): Not using default mode "400x300" (no clock available for
mode)
(II) VGA(0): Not using default mode "320x240" (width too large for
virtual size)
(II) VGA(0): Not using default mode "320x240" (no clock available for
mode)
(II) VGA(0): Not using mode "360x200" (no clock available for mode)
(II) VGA(0): Not using mode "320x200" (no clock available for mode)
(II) VGA(0): Not using mode "320x175" (no clock available for mode)
(EE) VGA(0): Virtual height (0) is too small for the hardware (min 1)
(II) UnloadModule: "vga"
(II) UnloadModule: "vgahw"
(II) Unloading /usr/X11R6/lib/modules/libvgahw.a
(II) UnloadModule: "int10"
(II) Unloading /usr/X11R6/lib/modules/linux/libint10.a
(EE) Screen(s) found, but none have a usable configuration.
Fatal server error:
no screens found
When reporting a problem related to a server crash, please send
the full server output, not just the last messages.
This can be found in the log file "/var/log/XFree86.0.log".
Please report problems to [EMAIL PROTECTED]
=========================================================================
=================
XF86Config file
# File generated by xf86config.
#
# Copyright (c) 1999 by The XFree86 Project, Inc.
#
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the
"Software"),
# to deal in the Software without restriction, including without
limitation
# the rights to use, copy, modify, merge, publish, distribute,
sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included
in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT
SHALL
# THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT
OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
#
# Except as contained in this notice, the name of the XFree86 Project
shall
# not be used in advertising or otherwise to promote the sale, use or
other
# dealings in this Software without prior written authorization from the
# XFree86 Project.
#
# **********************************************************************
# Refer to the XF86Config(4/5) man page for details about the format of
# this file.
# **********************************************************************
# **********************************************************************
# Module section -- this section is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
Section "Module"
# This loads the DBE extension module.
Load "dbe" # Double buffer extension
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection
# This loads the Type1 and FreeType font modules
Load "type1"
Load "speedo"
# Load "freetype"
# Load "xtt"
# This loads the GLX module
# Load "glx"
# This loads the DRI module
# Load "dri"
EndSection
# **********************************************************************
# Files section. This allows default font and rgb paths to be set
# **********************************************************************
Section "Files"
# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
RgbPath "/usr/X11R6/lib/X11/rgb"
# Multiple FontPath entries are allowed (which are concatenated
together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
#
# If you don't have a floating point coprocessor and emacs, Mosaic or
other
# programs take long to start up, try moving the Type1 and Speedo
directory
# to the end of this list (or comment them out).
#
FontPath "/usr/X11R6/lib/X11/fonts/local/"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
# FontPath "/usr/X11R6/lib/X11/fonts/TrueType/"
# FontPath "/usr/X11R6/lib/X11/fonts/freefont/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
# The module search path. The default path is shown here.
# ModulePath "/usr/X11R6/lib/modules"
EndSection
# **********************************************************************
# Server flags section.
# **********************************************************************
Section "ServerFlags"
# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging
# Option "NoTrapSignals"
# Uncomment this to disable the <Crtl><Alt><Fn> VT switch sequence
# (where n is 1 through 12). This allows clients to receive these key
# events.
# Option "DontVTSwitch"
# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.
# Option "DontZap"
# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences. This allows clients to receive these key events.
# Option "Dont Zoom"
# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.
# Option "DisableVidModeExtension"
# Uncomment this to enable the use of a non-local xvidtune client.
# Option "AllowNonLocalXvidtune"
# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.
# Option "DisableModInDev"
# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).
# Option "AllowNonLocalModInDev"
EndSection
# **********************************************************************
# Input devices
# **********************************************************************
# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************
Section "InputDevice"
Identifier "Keyboard1"
Driver "Keyboard"
# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.
# Option "Protocol" "Xqueue"
Option "AutoRepeat" "500 30"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
# Option "LeftAlt" "Meta"
# Option "RightAlt" "ModeShift"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# These are the default XKB settings for XFree86
# Option "XkbRules" "xfree86"
# Option "XkbModel" "pc101"
# Option "XkbLayout" "us"
# Option "XkbVariant" ""
# Option "XkbOptions" ""
# Option "XkbDisable"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection
# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************
Section "InputDevice"
# Identifier and driver
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "Auto"
Option "Device" "/dev/mouse"
# Mouse-speed setting for PS/2 mouse.
# Option "Resolution" "256"
# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.
# Option "Protocol" "Xqueue"
# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.
# Option "BaudRate" "9600"
# Option "SampleRate" "150"
# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
# Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"
# ChordMiddle is an option for some 3-button Logitech mice
# Option "ChordMiddle"
EndSection
# **********************************************************************
# Other input device sections
# this is optional and is required only if you
# are using extended input devices. This is for example only. Refer
# to the XF86Config man page for a description of the options.
# **********************************************************************
#
# Section "InputDevice"
# Identifier "Mouse2"
# Driver "mouse"
# Option "Protocol" "MouseMan"
# Option "Device" "/dev/mouse2"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball"
# Driver "magellan"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball2"
# Driver "spaceorb"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen0"
# Driver "microtouch"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "1412"
# Option "MaxX" "15184"
# Option "MinY" "15372"
# Option "MaxY" "1230"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen1"
# Driver "elo2300"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "231"
# Option "MaxX" "3868"
# Option "MinY" "3858"
# Option "MaxY" "272"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonThreshold" "17"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
# **********************************************************************
# Monitor section
# **********************************************************************
# Any number of monitor sections may be present
Section "Monitor"
Identifier "MyFutura"
# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
HorizSync 30 - 95
# HorizSync 30-64 # multisync
# HorizSync 31.5, 35.2 # multiple fixed sync frequencies
# HorizSync 15-25, 30-50 # multiple ranges of sync frequencies
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
VertRefresh 50 - 160
EndSection
# **********************************************************************
# Graphics device section
# **********************************************************************
# Any number of graphics device sections may be present
# Standard VGA Device:
Section "Device"
Identifier "Standard VGA"
VendorName "Unknown"
BoardName "Unknown"
# The chipset line is optional in most cases. It can be used to override
# the driver's chipset detection, and should not normally be specified.
# Chipset "generic"
# The Driver line must be present. When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module. Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this
section.
Driver "vga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for. When this line isn't present, a device
# section can only match up with the primary video device. For PCI
# devices a line like the following could be used. This line should not
# normally be included unless there is more than one video device
# intalled.
# BusID "PCI:0:10:0"
# VideoRam 256
# Clocks 25.2 28.3
EndSection
# Device configured by xf86config:
Section "Device"
Identifier "ONEMEGCHEAPVIDCARD"
Driver "vga"
# unsupported card
#VideoRam 1024
# Insert Clocks lines here if appropriate
EndSection
# **********************************************************************
# Screen sections
# **********************************************************************
# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
Identifier "Screen 1"
Device "ONEMEGCHEAPVIDCARD"
Monitor "MyFutura"
DefaultDepth 16
Subsection "Display"
Depth 8
Modes "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 16
Modes "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 24
Modes "640x480"
ViewPort 0 0
EndSubsection
EndSection
# **********************************************************************
# ServerLayout sections.
# **********************************************************************
# Any number of ServerLayout sections may be present. Each describes
# the way multiple screens are organised. A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option. In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.
Section "ServerLayout"
# The Identifier line must be present
Identifier "Simple Layout"
# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen. In this example, screen 2 is located to the
# right of screen 1.
Screen "Screen 1"
# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
# Section "DRI"
# Mode 0666
# EndSection
________________________________________________________________
The best thing to hit the internet in years - Juno SpeedBand!
Surf the web up to FIVE TIMES FASTER!
Only $14.95/ month - visit www.juno.com to sign up today!
_______________________________________________
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86
