Hi All,
I've an Acer Travelmate 210 TXR with a Trident Cyberblade chipset graphic card.
If I work on Windows, I can use 2 monitor with a large desktop
(like Xinerama).
Now, I try to settings the Xinerama on Linux and Xfree 4.3 (my
distribution is Debian unstable).
I see in the documention this Option:
Option "Display" "string" Override the display. Possible values
are "CRT", "LCD" and "Dual". Please note that this option is only
experimentally. Default: Use display active when X started.
I try tu use it, but I don't understand how it works.
My Xf86Config is (I cut the section that have non interesting
for the question):
Section "Device"
Identifier "Trident_1"
Driver "trident"
BusID "PCI:1:0:0"
Option "UseFBDev" "true"
Option "VideoRAM" "8192"
Option "SWCursor" "true"
Option "CyberStretch" "true"
Option "CyberShadow" "true"
Option "ShadowFB" "true"
Screen 0
Option "Display" "Dual"
#Option "NoAccel" "false"
#Option "VideoKey" "integer"
#Option "XvHsync" "integer"
#Option "XvVsync" "integer"
#Option "XvRskew" "integer"
EndSection
Section "Device"
Identifier "Trident_2"
Driver "trident"
BusID "PCI:1:0:0"
Screen 1
Option "Display" "CRT"
#Option "NoAccel" "false"
#Option "VideoKey" "integer"
#Option "XvHsync" "integer"
#Option "XvVsync" "integer"
#Option "XvRskew" "integer"
EndSection
Section "Monitor"
Identifier "FlatPanel"
HorizSync 31.5-60
VertRefresh 60
Option "DPMS"
EndSection
Section "Monitor"
Identifier "Hantarex"
HorizSync 28-60
VertRefresh 40-70
Option "DPMS"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "Trident_1"
Monitor "FlatPanel"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1024x768"
EndSubSection
EndSection
Section "Screen"
Identifier "External Screen"
Device "Trident_1"
Monitor "Hantarex"
DefaultDepth 8
SubSection "Display"
Depth 8
Modes "640x480"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
Screen "External Screen" RightOf "Default Screen"
InputDevice "Tastiera" "CoreKeyboard"
#InputDevice "Trust" "CorePointer"
InputDevice "Touchpad" "CorePointer"
InputDevice "WacomCursor" "SendCoreEvents"
InputDevice "WacomStylus" "SendCoreEvents"
InputDevice "WacomEraser" "SendCoreEvents"
EndSection
The lspci -vvvv output is:
01:00.0 VGA compatible controller: Trident Microsystems CyberBlade/i1
(rev 5d) (prog-if 00 [VGA]) Subsystem: Acer Incorporated [ALI]:
Unknown device 1019 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV-
VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz+ UDF-
FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR-
<PERR- Latency: 32
Interrupt: pin A routed to IRQ 11
Region 0: Memory at 80800000 (32-bit, non-prefetchable) [size=8M]
Region 1: Memory at 80100000 (32-bit, non-prefetchable) [size=128K]
Region 2: Memory at 81000000 (32-bit, non-prefetchable) [size=8M]
Expansion ROM at 80120000 [disabled] [size=64K]
Capabilities: [80] AGP version 1.0
Status: RQ=33 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3-
Rate=x1,x2
Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none>
Capabilities: [90] Power Management version 1
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
I use the latest developer driver:
-rw-r--r-- 1 root root 130868 2003-04-28 11:30 trident_drv.o
Thanks in advance if someone can help me.
--
Fabio
_______________________________________________
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86
