Can you try adding this to your Device Section.
Option "swcursor"
Does that help ??
Alan.
On Tue, May 04, 2004 at 10:31:48PM -0400, Michael Tuchman wrote:
> Although I noticed a comment in the changelog saying that the glint
> driver had fixed a problem with color inversion and screen blanking, I
> am still experiencing this problem (although it takes a good deal longer
> wait time until failure (15 minutes vs. 5 previously).
>
> Also, I have been searching through google for this issue over the past
> month. While it is possible that I overlooked something, I have made a
> good faith effort to keep abreast of this issue. Nonetheless, having
> exhausted my resources, I now come to this list for help.
>
> While I do try to solve my own problems to the best of my ability, in
> this case I am "flying blind" by using an old computer for which we are
> still seeking the original documentation.
> Below I have enclosed relevant files requested on the XFree86 Website.
> I am also running FREEBSD-CURRENT 5.2 (the uname -a output is at the
> bottom of this message).
>
> One option I have is to return to the 3.3.4 driver. I had heard this
> was OK. Any thoughts?
>
> Here is my XF86Config
> ---------------------- Begin XF86Config ---------------------------
>
> Section "Module"
> Load "dbe" # Double buffer extension
> SubSection "extmod"
> Option "omit xfree86-dga" # don't initialise the DGA extension
> EndSubSection
> Load "type1"
> Load "speedo"
> EndSection
> Section "Files"
> RgbPath "/usr/X11R6/lib/X11/rgb"
> FontPath "/usr/X11R6/lib/X11/fonts/local/"
> FontPath "/usr/X11R6/lib/X11/fonts/misc/"
> FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
> FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
> FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
> FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
> FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
> FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
> EndSection
> Section "ServerFlags"
> EndSection
> Section "InputDevice"
> Identifier "Keyboard1"
> Driver "Keyboard"
> Option "AutoRepeat" "500 30"
> Option "XkbRules" "xfree86"
> Option "XkbModel" "hpi6"
> Option "XkbLayout" "us"
> Option "XkbOptions" "caps:internal,altwin:meta_alt"
> EndSection
> Section "InputDevice"
> Identifier "Mouse1"
> Driver "mouse"
> Option "Protocol" "Auto"
> Option "Device" "/dev/sysmouse"
> Option "Emulate3Buttons"
> EndSection
> Section "Monitor"
> Identifier "Dell HTX1025 Ultrascan"
> HorizSync 30-70
> VertRefresh 48-150
> # Modeline "1280x1024" 108.00 1280 1328 1440 1688 1024 1025 1028 1066
> +hsync +vsync
>
> EndSection
> Section "Device"
> Identifier "ELSA" Driver "glint"
> BusID "PCI:1:10:1"
> VideoRam 32768
> # RamDac 250
> # Option "XaaNoScanlineCPUToScreenColorExpandFill"
> # Option "UseFBDev" "On"
> EndSection
> Section "Screen"
> Identifier "Screen 1"
> Device "ELSA"
> Monitor "Dell HTX1025 Ultrascan"
> DefaultDepth 24
> Subsection "Display"
> Depth 24
> Modes "1024x768" ViewPort 0 0
> EndSubsection
> EndSection
> Section "ServerLayout"
> Identifier "Simple Layout"
> Screen "Screen 1"
> InputDevice "Mouse1" "CorePointer"
> InputDevice "Keyboard1" "CoreKeyboard"
> EndSection
>
> ------------------------------End of XF86Config
> -------------------------------
>
> ------------------------------Beginning of /var/log/Xfree86.log.0 ---------
>
> XFree86 Version 4.4.0
> Release Date: 29 February 2004
> X Protocol Version 11, Revision 0, Release 6.6
> Build Operating System: FreeBSD 5.1-RELEASE i386 [ELF] Current Operating
> System: FreeBSD saudran.vzavenue.net 5.2-RELEASE FreeBSD 5.2-RELEASE #0:
> Sun Jan 11 04:21:45 GMT 2004
> [EMAIL PROTECTED]:/usr/obj/usr/src/sys/GENERIC i386
> Build Date: 27 February 2004
> Changelog Date: 29 February 2004
> Before reporting problems, check http://www.XFree86.Org/
> to make sure that you have the latest version.
> Module Loader present
> Markers: (--) probed, (**) from config file, (==) default setting,
> (++) from command line, (!!) notice, (II) informational,
> (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
> (==) Log file: "/var/log/XFree86.0.log", Time: Tue May 4 20:50:50 2004
> (==) Using config file: "/etc/X11/XF86Config"
> (==) ServerLayout "Simple Layout"
> (**) |-->Screen "Screen 1" (0)
> (**) | |-->Monitor "Dell HTX1025 Ultrascan"
> (**) | |-->Device "ELSA"
> (**) |-->Input Device "Mouse1"
> (**) |-->Input Device "Keyboard1"
> (**) Option "AutoRepeat" "500 30"
> (**) Option "XkbRules" "xfree86"
> (**) XKB: rules: "xfree86"
> (**) Option "XkbModel" "hpi6"
> (**) XKB: model: "hpi6"
> (**) Option "XkbLayout" "us"
> (**) XKB: layout: "us"
> (**) Option "XkbOptions" "caps:internal,altwin:meta_alt"
> (**) XKB: options: "caps:internal,altwin:meta_alt"
> (==) Keyboard: CustomKeycode disabled
> (**) FontPath set to
> "/usr/X11R6/lib/X11/fonts/local/,/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/"
>
>
> (**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
> (==) ModulePath set to "/usr/X11R6/lib/modules"
> (II) Module ABI versions:
> XFree86 ANSI C Emulation: 0.2
> XFree86 Video Driver: 0.7
> XFree86 XInput driver : 0.4
> XFree86 Server Extension : 0.2
> XFree86 Font Renderer : 0.4
> (II) Loader running on freebsd
> (II) LoadModule: "bitmap"
> (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
> (II) Module bitmap: vendor="The XFree86 Project"
> compiled for 4.4.0, module version = 1.0.0
> Module class: XFree86 Font Renderer
> ABI class: XFree86 Font Renderer, version 0.4
> (II) Loading font Bitmap
> (II) LoadModule: "pcidata"
> (II) Loading /usr/X11R6/lib/modules/libpcidata.a
> (II) Module pcidata: vendor="The XFree86 Project"
> compiled for 4.4.0, module version = 1.0.0
> ABI class: XFree86 Video Driver, version 0.7
> (--) Using syscons driver with X support (version 2.0)
> (--) using VT number 9
>
> (II) PCI: Probing config type using method 1
> (II) PCI: Config type is 1
> (II) PCI: stages = 0x03, oldVal1 = 0x00000000, mode1Res1 = 0x80000000
> (II) PCI: PCI scan (all values are in hex)
> (II) PCI: 00:00:0: chip 8086,1237 card 0000,0000 rev 02 class 06,00,00
> hdr 00
> (II) PCI: 00:0d:0: chip 8086,7000 card 0000,0000 rev 01 class 06,01,00
> hdr 80
> (II) PCI: 00:0d:1: chip 8086,7010 card 0000,0000 rev 00 class 01,01,80
> hdr 00
> (II) PCI: 00:0d:2: chip 8086,7020 card 0000,0000 rev 01 class 0c,03,00
> hdr 00
> (II) PCI: 00:0e:0: chip 1011,0024 card 0000,0000 rev 02 class 06,04,00
> hdr 01
> (II) PCI: 00:10:0: chip 9004,8178 card 0000,0000 rev 00 class 01,00,00
> hdr 00
> (II) PCI: 01:08:0: chip 10b7,9050 card 0000,0000 rev 00 class 02,00,00
> hdr 00
> (II) PCI: 01:0a:0: chip 1048,8901 card 1048,0935 rev 16 class 03,00,00
> hdr 80
> (II) PCI: 01:0a:1: chip 3d3d,0003 card 0000,0000 rev 01 class 0b,40,00
> hdr 80
> (II) PCI: 01:0a:2: chip 3d3d,0006 card 0000,0000 rev 01 class 03,80,00
> hdr 80
> (II) PCI: End of PCI scan
> (II) Host-to-PCI bridge:
> (II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set)
> (II) Bus 0 I/O range:
> [0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
> (II) Bus 0 non-prefetchable memory range:
> [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
> (II) Bus 0 prefetchable memory range:
> [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
> (II) PCI-to-ISA bridge:
> (II) Bus -1: bridge is at (0:13:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is
> set)
> (II) PCI-to-PCI bridge:
> (II) Bus 1: bridge is at (0:14:0), (0,1,1), BCTRL: 0x000a (VGA_EN is set)
> (II) Bus 1 I/O range:
> [0] -1 0 0x0000f000 - 0x0000ffff (0x1000) IX[B]
> (II) Bus 1 non-prefetchable memory range:
> [0] -1 0 0xf0000000 - 0xfbffffff (0xc000000) MX[B]
> (II) Bus 1 prefetchable memory range:
> [0] -1 0 0xef000000 - 0xefffffff (0x1000000) MX[B]
> (--) PCI:*(1:10:0) unknown vendor (0x1048) unknown chipset (0x8901) rev
> 22, Mem @ 0xf4000000/26, BIOS @ 0x80000000/16
> (--) PCI: (1:10:1) 3DLabs GLINT Delta rev 1, Mem @ 0xfafe0000/17
> (--) PCI: (1:10:2) 3DLabs GLINT MX rev 1, Mem @ 0xfafc0000/17,
> 0xf8000000/25, 0xf2000000/25, 0xf0000000/25, BIOS @ 0xfb000000/16
> (II) Addressable bus resource ranges are
> [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
> [1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
> (II) OS-reported resource ranges:
> [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
> [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
> [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
> [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
> [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
> [5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
> [6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
> (II) Active PCI resource ranges:
> [0] -1 0 0xfb000000 - 0xfb00ffff (0x10000) MX[B](B)
> [1] -1 0 0xf0000000 - 0xf1ffffff (0x2000000) MX[B](B)
> [2] -1 0 0xf2000000 - 0xf3ffffff (0x2000000) MX[B](B)
> [3] -1 0 0xf8000000 - 0xf9ffffff (0x2000000) MX[B](B)
> [4] -1 0 0xfafc0000 - 0xfafdffff (0x20000) MX[B](B)
> [5] -1 0 0xfafe0000 - 0xfaffffff (0x20000) MX[B]E
> [6] -1 0 0x80000000 - 0x8000ffff (0x10000) MX[B](B)
> [7] -1 0 0xf4000000 - 0xf7ffffff (0x4000000) MX[B](B)
> [8] -1 0 0x0000fcc0 - 0x0000fcff (0x40) IX[B]E
> [9] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[B]E
> [10] -1 0 0x0000ece0 - 0x0000ecff (0x20) IX[B]E
> [11] -1 0 0x0000ffa0 - 0x0000ffbf (0x20) IX[B]E
> (II) Inactive PCI resource ranges:
> [0] -1 0 0xfd000000 - 0xfdffffff (0x1000000) MX[B]E
> (II) Active PCI resource ranges after removing overlaps:
> [0] -1 0 0xfb000000 - 0xfb00ffff (0x10000) MX[B](B)
> [1] -1 0 0xf0000000 - 0xf1ffffff (0x2000000) MX[B](B)
> [2] -1 0 0xf2000000 - 0xf3ffffff (0x2000000) MX[B](B)
> [3] -1 0 0xf8000000 - 0xf9ffffff (0x2000000) MX[B](B)
> [4] -1 0 0xfafc0000 - 0xfafdffff (0x20000) MX[B](B)
> [5] -1 0 0xfafe0000 - 0xfaffffff (0x20000) MX[B]E
> [6] -1 0 0x80000000 - 0x8000ffff (0x10000) MX[B](B)
> [7] -1 0 0xf4000000 - 0xf7ffffff (0x4000000) MX[B](B)
> [8] -1 0 0x0000fcc0 - 0x0000fcff (0x40) IX[B]E
> [9] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[B]E
> [10] -1 0 0x0000ece0 - 0x0000ecff (0x20) IX[B]E
> [11] -1 0 0x0000ffa0 - 0x0000ffbf (0x20) IX[B]E
> (II) Inactive PCI resource ranges after removing overlaps:
> [0] -1 0 0xfd000000 - 0xfdffffff (0x1000000) MX[B]E
> (II) OS-reported resource ranges after removing overlaps with PCI:
> [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
> [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
> [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
> [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
> [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
> [5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
> [6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
> (II) All system resource ranges:
> [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
> [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
> [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
> [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
> [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
> [5] -1 0 0xfb000000 - 0xfb00ffff (0x10000) MX[B](B)
> [6] -1 0 0xf0000000 - 0xf1ffffff (0x2000000) MX[B](B)
> [7] -1 0 0xf2000000 - 0xf3ffffff (0x2000000) MX[B](B)
> [8] -1 0 0xf8000000 - 0xf9ffffff (0x2000000) MX[B](B)
> [9] -1 0 0xfafc0000 - 0xfafdffff (0x20000) MX[B](B)
> [10] -1 0 0xfafe0000 - 0xfaffffff (0x20000) MX[B]E
> [11] -1 0 0x80000000 - 0x8000ffff (0x10000) MX[B](B)
> [12] -1 0 0xf4000000 - 0xf7ffffff (0x4000000) MX[B](B)
> [13] -1 0 0xfd000000 - 0xfdffffff (0x1000000) MX[B]E
> [14] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
> [15] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
> [16] -1 0 0x0000fcc0 - 0x0000fcff (0x40) IX[B]E
> [17] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[B]E
> [18] -1 0 0x0000ece0 - 0x0000ecff (0x20) IX[B]E
> [19] -1 0 0x0000ffa0 - 0x0000ffbf (0x20) IX[B]E
> (II) LoadModule: "dbe"
> (II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
> (II) Module dbe: vendor="The XFree86 Project"
> compiled for 4.4.0, module version = 1.0.0
> Module class: XFree86 Server Extension
> ABI class: XFree86 Server Extension, version 0.2
> (II) Loading extension DOUBLE-BUFFER
> (II) LoadModule: "extmod"
> (II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
> (II) Module extmod: vendor="The XFree86 Project"
> compiled for 4.4.0, module version = 1.0.0
> Module class: XFree86 Server Extension
> ABI class: XFree86 Server Extension, version 0.2
> (II) Loading extension SHAPE
> (II) Loading extension MIT-SUNDRY-NONSTANDARD
> (II) Loading extension BIG-REQUESTS
> (II) Loading extension SYNC
> (II) Loading extension MIT-SCREEN-SAVER
> (II) Loading extension XC-MISC
> (II) Loading extension XFree86-VidModeExtension
> (II) Loading extension XFree86-Misc
> (II) Loading extension DPMS
> (II) Loading extension FontCache
> (II) Loading extension TOG-CUP
> (II) Loading extension Extended-Visual-Information
> (II) Loading extension XVideo
> (II) Loading extension XVideo-MotionCompensation
> (II) Loading extension X-Resource
> (II) LoadModule: "type1"
> (II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
> (II) Module type1: vendor="The XFree86 Project"
> compiled for 4.4.0, module version = 1.0.2
> Module class: XFree86 Font Renderer
> ABI class: XFree86 Font Renderer, version 0.4
> (II) Loading font Type1
> (II) Loading font CID
> (II) LoadModule: "speedo"
> (II) Loading /usr/X11R6/lib/modules/fonts/libspeedo.a
> (II) Module speedo: vendor="The XFree86 Project"
> compiled for 4.4.0, module version = 1.0.1
> Module class: XFree86 Font Renderer
> ABI class: XFree86 Font Renderer, version 0.4
> (II) Loading font Speedo
> (II) LoadModule: "glint"
> (II) Loading /usr/X11R6/lib/modules/drivers/glint_drv.o
> (II) Module glint: vendor="The XFree86 Project"
> compiled for 4.4.0, module version = 1.0.0
> Module class: XFree86 Video Driver
> ABI class: XFree86 Video Driver, version 0.7
> (II) LoadModule: "mouse"
> (II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
> (II) Module mouse: vendor="The XFree86 Project"
> compiled for 4.4.0, module version = 1.0.0
> Module class: XFree86 XInput Driver
> ABI class: XFree86 XInput driver, version 0.4
> (II) GLINT: driver for 3Dlabs chipsets: gamma, gamma2, ti_pm2, ti_pm, r4,
> pm4, pm3, pm2v, pm2, pm, 300sx, 500tx, mx, delta
> (II) Primary Device is: PCI 01:0a:0
> (WW) GLINT: No matching Device section for instance (BusID PCI:1:10:2)
> found
> (--) Chipset delta found
> (II) resource ranges after probing:
> [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
> [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
> [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
> [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
> [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
> [5] -1 0 0xfb000000 - 0xfb00ffff (0x10000) MX[B](B)
> [6] -1 0 0xf0000000 - 0xf1ffffff (0x2000000) MX[B](B)
> [7] -1 0 0xf2000000 - 0xf3ffffff (0x2000000) MX[B](B)
> [8] -1 0 0xf8000000 - 0xf9ffffff (0x2000000) MX[B](B)
> [9] -1 0 0xfafc0000 - 0xfafdffff (0x20000) MX[B](B)
> [10] -1 0 0xfafe0000 - 0xfaffffff (0x20000) MX[B](B)
> [11] -1 0 0x80000000 - 0x8000ffff (0x10000) MX[B](B)
> [12] -1 0 0xf4000000 - 0xf7ffffff (0x4000000) MX[B](B)
> [13] -1 0 0xfd000000 - 0xfdffffff (0x1000000) MX[B]E
> [14] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
> [15] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
> [16] -1 0 0x0000fcc0 - 0x0000fcff (0x40) IX[B]E
> [17] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[B]E
> [18] -1 0 0x0000ece0 - 0x0000ecff (0x20) IX[B]E
> [19] -1 0 0x0000ffa0 - 0x0000ffbf (0x20) IX[B]E
> (**) GLINT(0): Depth 24, (--) framebuffer bpp 32
> (==) GLINT(0): RGB weight 888
> (==) GLINT(0): Default visual is TrueColor
> (==) GLINT(0): Using gamma correction (1.0, 1.0, 1.0)
> (==) GLINT(0): Using HW cursor
> (--) GLINT(0): Not using Linux framebuffer device
> (--) GLINT(0): Chipset: "delta"
> (--) GLINT(0): FrameBuffer used from first rasterizer chip at 0xf2000000
> (--) GLINT(0): MMIO registers at 0xFAFE0000
> (==) GLINT(0): Write-combining range (0xfafe0000,0x20000) was already clear
> (--) GLINT(0): Delta Bug - Changing MMIO registers to 0xF0000000
> (**) GLINT(0): VideoRAM: 32768 kByte
> (II) Loading sub module "ramdac"
> (II) LoadModule: "ramdac"
> (II) Loading /usr/X11R6/lib/modules/libramdac.a
> (II) Module ramdac: vendor="The XFree86 Project"
> compiled for 4.4.0, module version = 0.1.0
> ABI class: XFree86 Video Driver, version 0.7
> (==) GLINT(0): Write-combining range (0xf0000000,0x20000) was already clear
> (==) GLINT(0): Write-combining range (0xf2000000,0x2000000)
> (--) GLINT(0): Cannot determine TI RAMDAC type, aborting
> (==) GLINT(0): Write-combining range (0xf0000000,0x20000) was already clear
> (==) GLINT(0): Write-combining range (0xf2000000,0x2000000)
> (--) GLINT(0): Attached RAMDAC is IBM 640
> (--) GLINT(0): FIFO Size is 15 DWORDS
> (==) GLINT(0): Min pixel clock is 16 MHz
> (**) GLINT(0): Max pixel clock is 220 MHz
> (II) GLINT(0): Dell HTX1025 Ultrascan: Using hsync range of 30.00-70.00 kHz
> (II) GLINT(0): Dell HTX1025 Ultrascan: Using vrefresh range of
> 48.00-150.00 Hz
> (II) GLINT(0): Clock range: 16.25 to 220.00 MHz
> (II) GLINT(0): Not using default mode "320x175" (bad mode
> clock/interlace/doublescan)
> (II) GLINT(0): Not using default mode "320x200" (bad mode
> clock/interlace/doublescan)
> (II) GLINT(0): Not using default mode "360x200" (bad mode
> clock/interlace/doublescan)
> (II) GLINT(0): Not using default mode "320x240" (bad mode
> clock/interlace/doublescan)
> (II) GLINT(0): Not using default mode "320x240" (bad mode
> clock/interlace/doublescan)
> (II) GLINT(0): Not using default mode "320x240" (bad mode
> clock/interlace/doublescan)
> (II) GLINT(0): Not using default mode "320x240" (bad mode
> clock/interlace/doublescan)
> (II) GLINT(0): Not using default mode "400x300" (bad mode
> clock/interlace/doublescan)
> (II) GLINT(0): Not using default mode "400x300" (bad mode
> clock/interlace/doublescan)
> (II) GLINT(0): Not using default mode "400x300" (bad mode
> clock/interlace/doublescan)
> (II) GLINT(0): Not using default mode "400x300" (bad mode
> clock/interlace/doublescan)
> (II) GLINT(0): Not using default mode "400x300" (bad mode
> clock/interlace/doublescan)
> (II) GLINT(0): Not using default mode "1024x768" (bad mode
> clock/interlace/doublescan)
> (II) GLINT(0): Not using default mode "512x384" (bad mode
> clock/interlace/doublescan)
> (II) GLINT(0): Not using default mode "512x384" (bad mode
> clock/interlace/doublescan)
> (II) GLINT(0): Not using default mode "512x384" (bad mode
> clock/interlace/doublescan)
> (II) GLINT(0): Not using default mode "512x384" (bad mode
> clock/interlace/doublescan)
> (II) GLINT(0): Not using default mode "512x384" (bad mode
> clock/interlace/doublescan)
> (II) GLINT(0): Not using default mode "576x432" (bad mode
> clock/interlace/doublescan)
> (II) GLINT(0): Not using default mode "640x480" (bad mode
> clock/interlace/doublescan)
> (II) GLINT(0): Not using default mode "1280x960" (hsync out of range)
> (II) GLINT(0): Not using default mode "640x480" (bad mode
> clock/interlace/doublescan)
> (II) GLINT(0): Not using default mode "640x512" (bad mode
> clock/interlace/doublescan)
> (II) GLINT(0): Not using default mode "1280x1024" (hsync out of range)
> (II) GLINT(0): Not using default mode "640x512" (bad mode
> clock/interlace/doublescan)
> (II) GLINT(0): Not using default mode "1280x1024" (hsync out of range)
> (II) GLINT(0): Not using default mode "640x512" (bad mode
> clock/interlace/doublescan)
> (II) GLINT(0): Not using default mode "1600x1200" (hsync out of range)
> (II) GLINT(0): Not using default mode "800x600" (bad mode
> clock/interlace/doublescan)
> (II) GLINT(0): Not using default mode "1600x1200" (hsync out of range)
> (II) GLINT(0): Not using default mode "800x600" (bad mode
> clock/interlace/doublescan)
> (II) GLINT(0): Not using default mode "1600x1200" (hsync out of range)
> (II) GLINT(0): Not using default mode "800x600" (bad mode
> clock/interlace/doublescan)
> (II) GLINT(0): Not using default mode "1600x1200" (hsync out of range)
> (II) GLINT(0): Not using default mode "800x600" (bad mode
> clock/interlace/doublescan)
> (II) GLINT(0): Not using default mode "1600x1200" (bad mode
> clock/interlace/doublescan)
> (II) GLINT(0): Not using default mode "800x600" (bad mode
> clock/interlace/doublescan)
> (II) GLINT(0): Not using default mode "1792x1344" (hsync out of range)
> (II) GLINT(0): Not using default mode "896x672" (bad mode
> clock/interlace/doublescan)
> (II) GLINT(0): Not using default mode "1792x1344" (bad mode
> clock/interlace/doublescan)
> (II) GLINT(0): Not using default mode "896x672" (bad mode
> clock/interlace/doublescan)
> (II) GLINT(0): Not using default mode "1856x1392" (hsync out of range)
> (II) GLINT(0): Not using default mode "928x696" (bad mode
> clock/interlace/doublescan)
> (II) GLINT(0): Not using default mode "1856x1392" (bad mode
> clock/interlace/doublescan)
> (II) GLINT(0): Not using default mode "928x696" (bad mode
> clock/interlace/doublescan)
> (II) GLINT(0): Not using default mode "1920x1440" (bad mode
> clock/interlace/doublescan)
> (II) GLINT(0): Not using default mode "960x720" (bad mode
> clock/interlace/doublescan)
> (II) GLINT(0): Not using default mode "1920x1440" (bad mode
> clock/interlace/doublescan)
> (II) GLINT(0): Not using default mode "960x720" (bad mode
> clock/interlace/doublescan)
> (II) GLINT(0): Not using default mode "416x312" (bad mode
> clock/interlace/doublescan)
> (II) GLINT(0): Not using default mode "576x384" (bad mode
> clock/interlace/doublescan)
> (II) GLINT(0): Not using default mode "700x525" (bad mode
> clock/interlace/doublescan)
> (II) GLINT(0): Not using default mode "1400x1050" (hsync out of range)
> (II) GLINT(0): Not using default mode "700x525" (bad mode
> clock/interlace/doublescan)
> (II) GLINT(0): Not using default mode "800x512" (bad mode
> clock/interlace/doublescan)
> (II) GLINT(0): Not using default mode "1920x1440" (bad mode
> clock/interlace/doublescan)
> (II) GLINT(0): Not using default mode "960x720" (bad mode
> clock/interlace/doublescan)
> (II) GLINT(0): Not using default mode "2048x1536" (bad mode
> clock/interlace/doublescan)
> (II) GLINT(0): Not using default mode "1024x768" (bad mode
> clock/interlace/doublescan)
> (II) GLINT(0): Not using default mode "2048x1536" (bad mode
> clock/interlace/doublescan)
> (II) GLINT(0): Not using default mode "1024x768" (bad mode
> clock/interlace/doublescan)
> (II) GLINT(0): Not using default mode "2048x1536" (bad mode
> clock/interlace/doublescan)
> (II) GLINT(0): Not using default mode "1024x768" (bad mode
> clock/interlace/doublescan)
> (II) GLINT(0): Not using default mode "1400x1050" (width too large for
> virtual size)
> (II) GLINT(0): Not using default mode "1280x1024" (width too large for
> virtual size)
> (II) GLINT(0): Not using default mode "1280x960" (width too large for
> virtual size)
> (II) GLINT(0): Not using default mode "1152x864" (width too large for
> virtual size)
> (II) GLINT(0): Not using default mode "1152x768" (width too large for
> virtual size)
> (WW) GLINT(0): This GLINT chip only supports one modeline, using first
> (--) GLINT(0): Virtual size is 1024x768 (pitch 1024)
> (**) GLINT(0): *Default mode "1024x768": 94.5 MHz, 68.7 kHz, 85.0 Hz
> (II) GLINT(0): Modeline "1024x768" 94.50 1024 1072 1168 1376 768 769
> 772 808 +hsync +vsync
> (==) GLINT(0): DPI set to (75, 75)
> (II) Loading sub module "fb"
> (II) LoadModule: "fb"
> (II) Loading /usr/X11R6/lib/modules/libfb.a
> (II) Module fb: vendor="The XFree86 Project"
> compiled for 4.4.0, module version = 1.0.0
> ABI class: XFree86 ANSI C Emulation, version 0.2
> (II) Loading sub module "xaa"
> (II) LoadModule: "xaa"
> (II) Loading /usr/X11R6/lib/modules/libxaa.a
> (II) Module xaa: vendor="The XFree86 Project"
> compiled for 4.4.0, module version = 1.1.0
> ABI class: XFree86 Video Driver, version 0.7
> (II) Loading sub module "ddc"
> (II) LoadModule: "ddc"
> (II) Loading /usr/X11R6/lib/modules/libddc.a
> (II) Module ddc: vendor="The XFree86 Project"
> compiled for 4.4.0, module version = 1.0.0
> ABI class: XFree86 Video Driver, version 0.7
> (--) Depth 24 pixmap format is 32 bpp
> (II) do I need RAC? No, I don't.
> (II) resource ranges after preInit:
> [0] 2 0 0xf0000000 - 0xf1ffffff (0x2000000) MX[B]
> [1] 2 0 0xf2000000 - 0xf3ffffff (0x2000000) MX[B]
> [2] 2 0 0xf8000000 - 0xf9ffffff (0x2000000) MX[B]
> [3] 2 0 0xfafc0000 - 0xfafdffff (0x20000) MX[B]
> [4] 1 0 0xf4000000 - 0xf7ffffff (0x4000000) MX[B]
> [5] 0 0 0xfafe0000 - 0xfaffffff (0x20000) MX[B]
> [6] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
> [7] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
> [8] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
> [9] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
> [10] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
> [11] -1 0 0xfb000000 - 0xfb00ffff (0x10000) MX[B](B)
> [12] -1 0 0xf0000000 - 0xf1ffffff (0x2000000) MX[B](B)
> [13] -1 0 0xf2000000 - 0xf3ffffff (0x2000000) MX[B](B)
> [14] -1 0 0xf8000000 - 0xf9ffffff (0x2000000) MX[B](B)
> [15] -1 0 0xfafc0000 - 0xfafdffff (0x20000) MX[B](B)
> [16] -1 0 0xfafe0000 - 0xfaffffff (0x20000) MX[B](B)
> [17] -1 0 0x80000000 - 0x8000ffff (0x10000) MX[B](B)
> [18] -1 0 0xf4000000 - 0xf7ffffff (0x4000000) MX[B](B)
> [19] -1 0 0xfd000000 - 0xfdffffff (0x1000000) MX[B]E
> [20] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
> [21] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
> [22] -1 0 0x0000fcc0 - 0x0000fcff (0x40) IX[B]E
> [23] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[B]E
> [24] -1 0 0x0000ece0 - 0x0000ecff (0x20) IX[B]E
> [25] -1 0 0x0000ffa0 - 0x0000ffbf (0x20) IX[B]E
> (==) GLINT(0): Write-combining range (0xf0000000,0x20000) was already clear
> (==) GLINT(0): Write-combining range (0xf2000000,0x2000000)
> (**) GLINT(0): Option "XaaNoScanlineCPUToScreenColorExpandFill"
> (II) GLINT(0): Using XFree86 Acceleration Architecture (XAA)
> Screen to screen bit blits
> Solid filled rectangles
> 8x8 mono pattern filled rectangles
> Solid Lines
> Offscreen Pixmaps
> Driver provided WriteBitmap replacement
> Driver provided WritePixmap replacement
> Setting up tile and stipple cache:
> 32 128x128 slots
> 18 256x256 slots
> 6 512x512 slots
> (==) GLINT(0): Backing store disabled
> (==) GLINT(0): Silken mouse enabled
> (==) RandR enabled
> (II) Initializing built-in extension MIT-SHM
> (II) Initializing built-in extension XInputExtension
> (II) Initializing built-in extension XTEST
> (II) Initializing built-in extension XKEYBOARD
> (II) Initializing built-in extension LBX
> (II) Initializing built-in extension XC-APPGROUP
> (II) Initializing built-in extension SECURITY
> (II) Initializing built-in extension XINERAMA
> (II) Initializing built-in extension XFree86-Bigfont
> (II) Initializing built-in extension RENDER
> (II) Initializing built-in extension RANDR
> (**) Option "Protocol" "Auto"
> (**) Mouse1: Device: "/dev/sysmouse"
> (**) Mouse1: Protocol: "Auto"
> (**) Option "CorePointer"
> (**) Mouse1: Core Pointer
> (**) Option "Device" "/dev/sysmouse"
> (**) Option "Emulate3Buttons"
> (**) Mouse1: Emulate3Buttons, Emulate3Timeout: 50
> (==) Mouse1: Buttons: 3
> (II) Keyboard "Keyboard1" handled by legacy driver
> (II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)
> (II) Mouse1: SetupAuto: hw.iftype is 4, hw.model is 0
> (II) Mouse1: SetupAuto: protocol is SysMouse
> Could not init font path element /usr/X11R6/lib/X11/fonts/local/,
> removing from list!
>
>
> ------------------------------End of Xfree86.log.0
> Operating system:
> FreeBSD saudran.vzavenue.net 5.2-RELEASE FreeBSD 5.2-RELEASE #0: Sun Jan
> 11 04:2
> 1:45 GMT 2004
> [EMAIL PROTECTED]:/usr/obj/usr/src/sys/GENERIC i386
>
>
>
> _______________________________________________
> XFree86 mailing list
> [EMAIL PROTECTED]
> http://XFree86.Org/mailman/listinfo/xfree86
_______________________________________________
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86
