"Agustin.Lobo" wrote: > Thanks Bukie, > > but I have both a Waitec and a ViewSonic monitor and start > X with startx -- +xinerama >
The next two lines is from your log. > (II) MGA(0): Monitor name: WAITEC LCD > (II) MGA(1): Monitor name: WAITEC LCD I don't know why DDC is returning same monitor on both port. > > (actually don't know which one is monitor1 and which one > is monitor2...) > > How should I set up the "Monitor section"? A good documentation is located at http://mirror.etf.bg.ac.yu/tldp/HOWTO/Xinerama-HOWTO/index.html > > > Agus > > Dr. Agustin Lobo > Instituto de Ciencias de la Tierra (CSIC) > Lluis Sole Sabaris s/n > 08028 Barcelona SPAIN > tel 34 93409 5410 > fax 34 93411 0012 > [EMAIL PROTECTED] > > On Fri, 4 Mar 2005, Bukie Mabayoje wrote: > > > > > 1. In your XF86Config-4 file you need to assign a port # for the xfs > > interface. Currently it is set to unix/:-1. Change the -1 to7100. Make sure > > the Font server is running before starting X > > 2. If you don't want to use the Font server then you have to specify the > > font location > > e.g. Assuming you have the following on your box > > FontPath "/usr/lib/X11/fonts/misc" > > FontPath "/usr/lib/X11/fonts/cyrillic" > > FontPath "/usr/lib/X11/fonts/100dpi/:unscaled" > > FontPath "/usr/lib/X11/fonts/75dpi/:unscaled" > > FontPath "/usr/lib/X11/fonts/Type1" > > FontPath "/usr/lib/X11/fonts/Speedo" > > FontPath "/usr/lib/X11/fonts/100dpi" > > FontPath "/usr/lib/X11/fonts/75dpi" > > 3a. Your Section Monitor1 is a little confusing. According to the > > information returned by the DDC you have > > 1. a WAITEC LCD monitor not a ViewSonic VP190 > > 2. Your Video card will only support VertRefresh 60-75Hz. So > > change your monitor1 VertRefresh to 60-75 > > 3. Your Video card will only support HorizSync 31-60Khz. Change > > your monitor 1 HorizSync to 31-60 > > > > 3b. Your Section Monitor1 is a little confusing. According to the > > information returned by the DDC you have > > 1. Your Video card will only support VertRefresh 60-75Hz. So > > change your monitor2 VertRefresh to 50-75 > > 2. Your Video card will only support HorizSync 31-60Khz. Change > > your monitor2 HorizSync to 31-60 > > > > 4. Your ModeLine should be > > Modeline "[EMAIL PROTECTED]" 80.00 992 1024 1320 1352 744 758 > > 767 782 > > > > > > > > > > "Agustin.Lobo" wrote: > > > > > Here it is, thanks for your help. > > > Agus > > > > > > _______________________________________________ > XFree86 mailing list > XFree86@XFree86.Org > http://XFree86.Org/mailman/listinfo/xfree86 _______________________________________________ XFree86 mailing list XFree86@XFree86.Org http://XFree86.Org/mailman/listinfo/xfree86