[XFree86] Re: Help setting up RedHat9 on a Dell C600

[Jeff Farr]

Ok, I've managed to get the Config file available to knoppix, below are it's contents, look fine to me.
I should possibly mention that hda2 doesn't show up in /mnt although mtab lists that it should.  If I try to mount it manually I get a message that it is alreay mounted or "/ is busy".  I've run XFree86 -configure and then reboot the server, but the results are the same, still can't find a good screen it says... I'm stumped

Section "ServerLayout"
    Identifier     "XFree86 Configured"
    Screen      0  "Screen0" 0 0
    InputDevice    "Mouse0" "CorePointer"
    InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
    RgbPath      "/usr/X11R6/lib/X11/rgb"
    ModulePath   "/usr/X11R6/lib/modules"
    FontPath     "/usr/X11R6/lib/X11/fonts/misc/"
    FontPath     "/usr/X11R6/lib/X11/fonts/Speedo/"
    FontPath     "/usr/X11R6/lib/X11/fonts/Type1/"
    FontPath     "/usr/X11R6/lib/X11/fonts/CID/"
    FontPath     "/usr/X11R6/lib/X11/fonts/75dpi/"
    FontPath     "/usr/X11R6/lib/X11/fonts/100dpi/"
EndSection

Section "Module"
    Load  "dbe"
    Load  "dri"
    Load  "extmod"
    Load  "glx"
    Load  "record"
    Load  "xtrap"
    Load  "speedo"
    Load  "type1"
EndSection

Section "InputDevice"
    Identifier  "Keyboard0"
    Driver      "keyboard"
EndSection

Section "InputDevice"
    Identifier  "Mouse0"
    Driver      "mouse"
    Option        "Protocol" "auto"
    Option        "Device" "/dev/mouse"
EndSection

Section "Monitor"
    Identifier   "Monitor0"
    VendorName   "Monitor Vendor"
    ModelName    "Monitor Model"
EndSection

Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
        ### [arg]: arg optional
        #Option     "NoAccel"                # [<bool>]
        #Option     "SWcursor"               # [<bool>]
        #Option     "Dac6Bit"                # [<bool>]
        #Option     "Dac8Bit"                # [<bool>]
        #Option     "DMAForXv"               # [<bool>]
        #Option     "ForcePCIMode"           # [<bool>]
        #Option     "CCEPIOMode"             # [<bool>]
        #Option     "CCENoSecurity"          # [<bool>]
        #Option     "CCEusecTimeout"         # <i>
        #Option     "AGPMode"                # <i>
        #Option     "AGPSize"                # <i>
        #Option     "RingSize"               # <i>
        #Option     "BufferSize"             # <i>
        #Option     "Display"                # <str>
        #Option     "PanelWidth"             # <i>
        #Option     "PanelHeight"            # <i>
        #Option     "ProgramFPRegs"          # [<bool>]
        #Option     "UseFBDev"               # [<bool>]
        #Option     "VideoKey"               # <i>
        #Option     "ShowCache"              # [<bool>]
    Identifier  "Card0"
    Driver      "ati"
    VendorName  "ATI Technologies Inc"
    BoardName   "Rage Mobility M3 AGP 2x"
    BusID       "PCI:1:0:0"
EndSection

Section "Screen"
    Identifier "Screen0"
    Device     "Card0"
    Monitor    "Monitor0"
    SubSection "Display"
        Depth     1
    EndSubSection
    SubSection "Display"
        Depth     4
    EndSubSection
    SubSection "Display"
        Depth     8
    EndSubSection
    SubSection "Display"
        Depth     15
    EndSubSection
    SubSection "Display"
        Depth     16
    EndSubSection
    SubSection "Display"
        Depth     24
    EndSubSection
EndSection