I hope I'm not missing something. I see port 25 (SMTP) is bound at 212.243.37.26, which should be fine. I don't see port 110 bound anywhere. If you can connect to port 110 with telnet, then perhaps the listing you posted is not complete. Perhaps there's no problem with XMail's POP3.
Using the secure connection setting in Outlook, do you get a prompt window asking about accepting the SSL certificate? Is the certificate signed by a known certificate authority such as Thawte, or is it locally signed? Yann LE ROCH - Agence CHROM wrote: > Hello Kevin > i do a netstat -p TCP -an in local area > and the result is: > Proto Local Address Foreign Address State > TCP 0.0.0.0:21 0.0.0.0:0 > Listening > TCP 0.0.0.0:53 0.0.0.0:0 > Listening > TCP 0.0.0.0:79 0.0.0.0:0 > Listening > TCP 0.0.0.0:80 0.0.0.0:0 > Listening > TCP 0.0.0.0:119 0.0.0.0:0 > Listening > TCP 0.0.0.0:135 0.0.0.0:0 > Listening > TCP 0.0.0.0:443 0.0.0.0:0 > Listening > TCP 0.0.0.0:445 0.0.0.0:0 > Listening > TCP 0.0.0.0:563 0.0.0.0:0 > Listening > TCP 0.0.0.0:995 0.0.0.0:0 > Listening > TCP 212.243.37.26:25 0.0.0.0:0 > Listening > > If i do a telnet connexion on port 110 from a client i've this message > + ok <[EMAIL PROTECTED]> xmail 1.18 <Win32/Ix86> Pop3 server > service ready ; wed 24 Nov 2004 ... > > Outlook have a checkbox "This server need a secure connexion (SSL)" and the > port number change automaticly to 995 when checkbox is checked (sorry for > translate) > Thanks > Yann > > > -----Message d'origine----- > De : [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] la part de Kevin Williams > Envoyé : mercredi 24 novembre 2004 04:01 > À : [EMAIL PROTECTED] > Objet : [xmail] Re: HEEELLLLLPPPPPPPPP > > > If you run "netstat -p TCP -an" from a Command Prompt window, do you see > something like: > > Proto Local Address Foreign Address State > TCP 0.0.0.0:25 0.0.0.0:0 LISTENING > TCP 0.0.0.0:110 0.0.0.0:0 LISTENING > > Under "Local Address", you want to be sure of two things. First, that > port 25 and 110 (the numbers after the colon) are there. Second, take > careful note of what the IP address is (the numbers before the colon). > > If you have four zeros separated by periods, as above, then the service > is bound to "all addresses". This means that you can use any IP address > that is assigned to the machine. From your previous post, lets assume it > is 212.243.37.26. From the server or any other machine that can ping the > server, try this in a Command Prompt window: "telnet 212.243.37.26 110" > and you should see something like this come back to you on the screen: > > +OK <[EMAIL PROTECTED]> [XMail 1.20 POP3 Server] > service ready; Tue, 23 Nov 2004 19:52:48 -0700 > > Then type "quit". You just connected to POP3. Outlook should be able to > use the same settings if necessary. Verify this before moving on. If > this works, you have a problem with either your stunnel or Outlook > configuration. If this doesn't work, please post the results of the > "netstat" and "telnet" commands above. > > Also, be sure Outlook is set for the "secure" connection. I don't have > Outlook so I'm not sure of the option structure, but if it is not > configured to expect a SSL certificate it will likely be confused. > > Hope that helps! > > Yann LE ROCH - Agence CHROM wrote: > >>Hi Tracy >>it's more difficult what i think but i'll try to understand your email. >>Many thanks >>Yann >> >>-----Message d'origine----- >>De : [EMAIL PROTECTED] >>[mailto:[EMAIL PROTECTED] la part de Tracy >>Envoye : mardi 23 novembre 2004 19:10 >>A : [EMAIL PROTECTED] >>Objet : [xmail] Re: HEEELLLLLPPPPPPPPP >> >> >>OK, I've sat back and watched the show, and it appears that "what we have >>here is a failure to communicate"...:) >> >>In the "pre-stunnel" world, you have >> >>Client Server >>Outlook :xxx -> Xmail :25 >>Outlook :xxx -> Xmail :110 >> >>If you want a secure connection to the server, you then have to provide a >>secure tunnel (stunnel, for instance) to the server. However, note the >>analogy of the tunnel - a tunnel has both an entrance and an exit. You've >>defined the exit point on the server, as such: >> >>stunnel :8025 -> Xmail :25 >>stunnel :995 -> Xmail :110 >> >>But you haven't defined the entrance to the tunnel. Something on the > > client > >>has to provide the encrypted session. Now, Outlook (IIRC) can do secure >>SMTP connections on port 465 - but I don't know if that security is >>"compatible" with stunnel. If so, then you just need to change stunnel's >>mapping from :8025 to :465, and your SMTP should be fine. >> >>However, for POP3, you're going to need something to establish the > > entrance > >>to the secure tunnel, such as a secure client redirector (sorry, I don't >>have a name to provide you off the top of my head). But the idea is that > > it > >>will work something like: >> >>Client Client Server >>Server >>Outlook :xxx -> sclient :25 -> stunnel :8025 -> Xmail :25 >>Outlook :xxx -> sclient :110 -> stunnel :995 -> Xmail :110 >> >>Whatever you use on the client side (and, as far as I know, it could be >>just another copy of stunnel, configured differently), needs to be >>configured to make the outbound connection to stunnel on the server side >>*and* Outlook needs to be configured to use the secure client software >>rather than pointing straight at the server. >> >>I don't know if all this makes any sense to you, as I know there is at >>least some language barrier here. But hopefully it will make enough sense >>so you can see where to proceed from here. >> >>Tracy >> >>PS: I am not an expert in these matters, and my understanding may be >>flawed. If it is, I'm sure someone will point it out soon enough... >> >> >>At 12:51 11/23/2004, Yann LE ROCH - Agence CHROM wrote: >> >> >>>If i try to connect with outlook client to my server by >>>mail.mydomain.com:995 or myip:995 >>>i've an error 0x800ccc0e and my stunnel.log write anything >>>thanks >>>Yann >>> >>> >>>-----Message d'origine----- >>>De : [EMAIL PROTECTED] >>>[mailto:[EMAIL PROTECTED] la part de Davide Libenzi >>>Envoye : mardi 23 novembre 2004 18:39 >>>A : [EMAIL PROTECTED] >>>Objet : [xmail] Re: HEEELLLLLPPPPPPPPP >>> >>> >>>On Tue, 23 Nov 2004, Yann LE ROCH - Agence CHROM wrote: >>> >>> >>> >>>>so, >>>>if i retreive emails with outlook where xmail is installed with >> >>parameter >> >> >>>>pop3: 127.0.0.1:995 there are no problem !! >>>>i don't understand >>> >>>Why there should be problems?!! The stunnel log you posted does not >>>contain anything bad and shows that stunnel correctly bind to smtps and >>>pop3s ports. >>> >>> >>> >>>- Davide >>> >>>- >>>To unsubscribe from this list: send the line "unsubscribe xmail" in >>>the body of a message to [EMAIL PROTECTED] >>>For general help: send the line "help" in the body of a message to >>>[EMAIL PROTECTED] >>> >>> >>>- >>>To unsubscribe from this list: send the line "unsubscribe xmail" in >>>the body of a message to [EMAIL PROTECTED] >>>For general help: send the line "help" in the body of a message to >>>[EMAIL PROTECTED] >> >> >>- >>To unsubscribe from this list: send the line "unsubscribe xmail" in >>the body of a message to [EMAIL PROTECTED] >>For general help: send the line "help" in the body of a message to >>[EMAIL PROTECTED] >> >> >>- >>To unsubscribe from this list: send the line "unsubscribe xmail" in >>the body of a message to [EMAIL PROTECTED] >>For general help: send the line "help" in the body of a message to >>[EMAIL PROTECTED] >> > > - > To unsubscribe from this list: send the line "unsubscribe xmail" in > the body of a message to [EMAIL PROTECTED] > For general help: send the line "help" in the body of a message to > [EMAIL PROTECTED] > > > - > To unsubscribe from this list: send the line "unsubscribe xmail" in > the body of a message to [EMAIL PROTECTED] > For general help: send the line "help" in the body of a message to > [EMAIL PROTECTED] > - To unsubscribe from this list: send the line "unsubscribe xmail" in the body of a message to [EMAIL PROTECTED] For general help: send the line "help" in the body of a message to [EMAIL PROTECTED]
