On Mon, 6 Mar 2006, Dale Qualls wrote: > Well, we attempted to replace our mailserver this weekend but had to > revert back to the older one due to a filter issue that didn't make > much sense to me. > > Original setup: > RH8 > XMail 1.22 > f-prot (using a modified clamav filter) > SA 3.0.2 (using bsa_filter which is a version of Don's sa_filter that was > modified by Beau Cox) > > Everything runs fine on this config. > > I built a new Suse 10 box, installed xMail 1.22 on it then moved over > my /var/MailRoot folder from the old box. > This box is running SA 3.0.4 instead of 3.0.2 and I now receive filter > errors on the bsa_filter. > > It also doesn't appear that xMail starts up all 20 of its threads. > pstree -p only shows a single xMail entry (but it does show the 5 > spamd threads). > > All I could find on the 'net had to do with possible timeout erros > (apparently this is what the -97 means). > > spamd is running but it almost seems like SA isn't answering when it's > called by the filter. > > Any thoughts off the top of your heads? > > I can't easily test it as we didnt' have a replacement server (we just > yanked the original drive and put this a new one in for the install so > we could easily fall back in case of a failure such as this). > > For grins I was going to bump up the SA version on the RH box to 3.0.4 > to see if it caused the same problems but figured I'd post a quick > question first.
The error -97 is ERR_FORK. It means you there are too many running processes, or the system was unable to exec your filter. Did you specify the full path to the filter binary? - Davide - To unsubscribe from this list: send the line "unsubscribe xmail" in the body of a message to [EMAIL PROTECTED] For general help: send the line "help" in the body of a message to [EMAIL PROTECTED]