On Thu, Aug 31, 2017 at 7:40 AM, Hans Verkuil <hverk...@xs4all.nl> wrote: > From: Hans Verkuil <hans.verk...@cisco.com> > > This edid-decode patch series has been sitting in my git repo for > way too long, so it is time to upstream this. > > We (that is Cisco Systems Norway) have been using this to verify > both our own and others EDIDs. So besides adding support for new > data blocks and correcting little bugs all over it also improves > compliance checks. Especially making sure that the reported > timings are not out of range of the reported monitor frequency > range.
I didn't double check the specs, but I did a quick review of the patches and they look good to me. Series is: Acked-by: Alex Deucher <alexander.deuc...@amd.com> > > Regards, > > Hans Verkuil > > Hans Verkuil (27): > edid-decode: add HDMI Forum VSDB support > edid-decode: print the chromaticities > edid-decode: report picture aspect ratio > edid-decode: add check for both serial number and string > edid-decode: verify 640x480p60 is defined for CEA-861 > edid-decode: bit 0, byte 0x18 has been renamed for EDID 1.4 > edid-decode: fix CVT version > edid-decode: fix "Supports CVT standard blanking" > edid-decode: add support for the "More standard timings" block > edid-decode: add Display Color Management support > edid-decode: add support for the Color Point > edid-decode: add support for Established Timings III > edid-decode: add horizontal freq and pixelclock > edid-decode: check monitor min/max range against supported timings > edid-decode: SVDs in the 4:2:0 Data Block have half the pixclk > edid-decode: YCbCr 4:2:0 Capability Map support > edid-decode: fix has_preferred_timing handling for 1.4 > edid-decode: fix week/year interpretation. > edid-decode: fix 1.3/1.4 differences in Model Year and Feature Support > edid-decode: return 1 if no edid was found > edid-decode: improve the hex dump parser to be more generic > edid-decode: allow for comma separated hex values > edid-decode: allow the year to be one year in the future > edid-decode: check Max TMDS Rates > edid-decode: check if HDMI VICs are also in the VSB > edid-decode: calculate hfreq and clock from CVT > edid-decode: show correct EDID version in string > > edid-decode.c | 1080 > ++++++++++++++++++++++++++++++++++++++++++++------------- > 1 file changed, 833 insertions(+), 247 deletions(-) > > -- > 2.14.1 > > _______________________________________________ > xorg-devel@lists.x.org: X.Org development > Archives: http://lists.x.org/archives/xorg-devel > Info: https://lists.x.org/mailman/listinfo/xorg-devel _______________________________________________ xorg-devel@lists.x.org: X.Org development Archives: http://lists.x.org/archives/xorg-devel Info: https://lists.x.org/mailman/listinfo/xorg-devel