http://bugs.freedesktop.org/show_bug.cgi?id=19943
Ancoron <[email protected]> changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |[email protected] --- Comment #5 from Ancoron <[email protected]> 2009-05-18 11:38:34 PST --- ^^ to which release version does this fix apply? I have a similar effect on my Radeon HD2400Pro: Connected a Dell 3007WFP at the Dual-Link-DVI connector and a Iiyama Vision Master Pro 510 (22" CRT) to the VGA connector. During boot of Kubuntu Jaunty both monitors show the loading screen and also both monitors are used when in text mode (I guess it is cloned automatically by the card itself). But as soon as the KDM comes up only the big Dell with 2560x1600 comes up, the CRT goes off. In the Xorg.0.log I read: ... XRANDR name: HDMI-0 Connector: HDMI-B DFP1: INTERNAL_KLDSCP_TMDS1 DDC reg: 0x7e50 ... (II) RADEON(0): Output: HDMI-0, Detected Monitor Type: 0 invalid output device for dac detection finished output detect: 0 ... So I guess here (as the card has a real HDMI connector between the DVI-I and the VGA) the driver doesn't recognize the VGA connector at all and invalidates the CRT monitor before all other things. I also tried the FGLRX driver and with that I can display something on the second monitor, but the configuration is a mess and requires various xrandr calls (unable to create a working correct layout using xorg.conf) and it is not able to exceed 60Hz refresh rate on the CRT which is really bad. -- Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the assignee for the bug. _______________________________________________ xorg-driver-ati mailing list [email protected] http://lists.x.org/mailman/listinfo/xorg-driver-ati
