Hello, I am running kernel 2.6.33, xorg server 1.7.5 on a gentoo based Panasonic CF-18. Kernel reports:
input: LBPS/2 Fujitsu Lifebook TouchScreen as /devices/platform/i8042/serio3/input/input6 X server reports: (**) Touchscreen: doesn't report core events (**) Touchscreen: Device: "/dev/input/event6" (II) Touchscreen: Found absolute axes (II) Touchscreen: Found x and y absolute axes (II) Touchscreen: Found absolute touchscreen (II) Touchscreen: Configuring as touchscreen (**) Touchscreen: YAxisMapping: buttons 4 and 5 (**) Touchscreen: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 (II) XINPUT: Adding extended input device "Touchscreen" (type: TOUCHSCREEN) (**) Touchscreen: (accel) keeping acceleration scheme 1 (**) Touchscreen: (accel) acceleration profile 0 (II) Touchscreen: initialized for absolute axes. xorg.conf contains: Section "InputDevice" Identifier "Touchscreen" Driver "evdev" Option "Device" "/dev/input/event6" Option "DeviceName" "Touchscreen" Option "Calibration" "64 602 -60 470" #Option "ReportingMode" "Raw" #Option "SwapY" EndSection I can run xinput_calibrator_x11 v0.6.0. This results in correct values in the output of 'xinput list-props "Touchscreen"': Device 'Touchscreen': Device Enabled (136): 1 Device Accel Profile (244): 0 Device Accel Constant Deceleration (245): 1.000000 Device Accel Adaptive Deceleration (247): 1.000000 Device Accel Velocity Scaling (248): 10.000000 Evdev Reopen Attempts (253): 10 Evdev Axis Inversion (254): 0, 0 Evdev Axis Calibration (255): 62, 519, -10, 434 Evdev Axes Swap (256): 0 Axis Labels (257): "Abs X" (251), "Abs Y" (252) Button Labels (258): "Button Unknown" (250), "Button Unknown" (250), "Button Unknown" (250), "Button Wheel Up" (140), "Button Wheel Down" (141) Evdev Middle Button Emulation (259): 2 Evdev Middle Button Timeout (260): 50 Evdev Wheel Emulation (261): 0 Evdev Wheel Emulation Axes (262): 0, 0, 4, 5 Evdev Wheel Emulation Inertia (263): 10 Evdev Wheel Emulation Timeout (264): 200 Evdev Wheel Emulation Button (265): 4 Evdev Drag Lock Buttons (266): 0 However, the clicks on the touchscreen do not result in cursor going to where the click occurs. Also, if I rerun xinput_calibrator_x11 it results in new calibration values each time it is executed (values vary quite a bit...not just what one might expect from being slightly off when calibrating). This touchscreen worked with evtouch. Any ideas? John _______________________________________________ xorg@lists.freedesktop.org: X.Org support Archives: http://lists.freedesktop.org/archives/xorg Info: http://lists.freedesktop.org/mailman/listinfo/xorg