Guys, Have you got any idea about? Rgds. Piotr On 19 March 2010 15:32, Piotr Lukawski <plukaw...@googlemail.com> wrote:
> Thanks a lot for your help. > Please find below Xorg.0.log after Xorg -config /root/xorg.conf -logverbose > 7: > > (II) config/hal: initialized_XSERVTransSocketOpenCOTSServer: Unable to open > socket for inet6 > _XSERVTransOpen: transport open failed for inet6/casiopea.lukawski.net:0 > _XSERVTransMakeAllCOTSServerListeners: failed to open listener for inet6 > > > X.Org X Server 1.6.5 > Release Date: 2009-10-11 > X Protocol Version 11, Revision 0 > Build Operating System: FreeBSD 8.0-RELEASE i386 > Current Operating System: FreeBSD casiopea.lukawski.net 8.0-RELEASE-p2 > FreeBSD 8.0-RELEASE-p2 #2: Wed Mar 10 07:08:19 CET 2010 > r...@casiopea.lukawski.net:/usr/obj/usr/src/sys/FIVA i386 > > Build Date: 06 March 2010 02:03:54PM > > Before reporting problems, check http://wiki.x.org > to make sure that you have the latest version. > Markers: (--) probed, (**) from config file, (==) default setting, > (++) from command line, (!!) notice, (II) informational, > (WW) warning, (EE) error, (NI) not implemented, (??) unknown. > (==) Log file: "/var/log/Xorg.0.log", Time: Fri Mar 19 15:17:34 2010 > > (++) Using config file: "/root/xorg.conf" > (==) ServerLayout "XFree86 Configured" > (**) |-->Screen "FIVA Screen" (0) > (**) | |-->Monitor "FIVA 8.4inch LCD" > (**) | |-->Device "Silicon Motion Lynx" > (**) |-->Input Device "FIVA Point" > (**) |-->Input Device "FIVA Keyboard" > (**) Option "DontZap" "off" > > (**) Option "AllowEmptyInput" "false" > (==) Automatically adding devices > (==) Automatically enabling devices > (**) FontPath set to: > /usr/local/lib/X11/fonts/misc/, > /usr/local/lib/X11/fonts/TTF/, > /usr/local/lib/X11/fonts/OTF, > /usr/local/lib/X11/fonts/Type1/, > /usr/local/lib/X11/fonts/100dpi/, > /usr/local/lib/X11/fonts/75dpi/, > /usr/local/lib/X11/fonts/misc/, > /usr/local/lib/X11/fonts/TTF/, > /usr/local/lib/X11/fonts/OTF, > /usr/local/lib/X11/fonts/Type1/, > /usr/local/lib/X11/fonts/100dpi/, > /usr/local/lib/X11/fonts/75dpi/ > (**) ModulePath set to "/usr/local/lib/xorg/modules" > > (II) Loader magic: 0x6a0 > (II) Module ABI versions: > X.Org ANSI C Emulation: 0.4 > X.Org Video Driver: 5.0 > X.Org XInput driver : 4.0 > X.Org Server Extension : 2.0 > (II) Loader running on freebsd > (--) Using syscons driver with X support (version 2.0) > (--) using VT number 9 > > (--) PCI:*(0:0:9:0) 126f:0712:126f:0712 Silicon Motion, Inc. SM712 LynxEM+ > rev 160, Mem @ 0xfd000000/16777216, BIOS @ 0x????????/65536 > (II) System resource ranges: > [0] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] > [1] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] > [2] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] > [3] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] > [4] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] > (II) "extmod" will be loaded. This was enabled by default and also > specified in the config file. > (II) "dbe" will be loaded. This was enabled by default and also specified > in the config file. > (II) "glx" will be loaded. This was enabled by default and also specified > in the config file. > (II) "record" will be loaded. This was enabled by default and also > specified in the config file. > (II) "dri" will be loaded. This was enabled by default and also specified > in the config file. > (II) "dri2" will be loaded. This was enabled by default and also specified > in the config file. > (II) LoadModule: "dbe" > (II) Loading /usr/local/lib/xorg/modules/extensions//libdbe.so > (II) Module dbe: vendor="X.Org Foundation" > compiled for 1.6.5, module version = 1.0.0 > Module class: X.Org Server Extension > ABI class: X.Org Server Extension, version 2.0 > (II) Loading extension DOUBLE-BUFFER > (II) LoadModule: "dri" > (II) Loading /usr/local/lib/xorg/modules/extensions//libdri.so > (II) Module dri: vendor="X.Org Foundation" > compiled for 1.6.5, module version = 1.0.0 > ABI class: X.Org Server Extension, version 2.0 > (II) Loading extension XFree86-DRI > (II) LoadModule: "dri2" > (II) Loading /usr/local/lib/xorg/modules/extensions//libdri2.so > (II) Module dri2: vendor="X.Org Foundation" > compiled for 1.6.5, module version = 1.1.0 > ABI class: X.Org Server Extension, version 2.0 > (II) Loading extension DRI2 > (II) LoadModule: "extmod" > (II) Loading /usr/local/lib/xorg/modules/extensions//libextmod.so > (II) Module extmod: vendor="X.Org Foundation" > compiled for 1.6.5, module version = 1.0.0 > Module class: X.Org Server Extension > ABI class: X.Org Server Extension, version 2.0 > (II) Loading extension MIT-SCREEN-SAVER > (II) Loading extension XFree86-VidModeExtension > (II) Loading extension XFree86-DGA > (II) Loading extension DPMS > (II) Loading extension XVideo > (II) Loading extension XVideo-MotionCompensation > (II) Loading extension X-Resource > (II) LoadModule: "glx" > (II) Loading /usr/local/lib/xorg/modules/extensions//libglx.so > (II) Module glx: vendor="X.Org Foundation" > compiled for 1.6.5, module version = 1.0.0 > ABI class: X.Org Server Extension, version 2.0 > (==) AIGLX disabled > (II) Loading extension GLX > (II) LoadModule: "record" > (II) Loading /usr/local/lib/xorg/modules/extensions//librecord.so > (II) Module record: vendor="X.Org Foundation" > compiled for 1.6.5, module version = 1.13.0 > Module class: X.Org Server Extension > ABI class: X.Org Server Extension, version 2.0 > (II) Loading extension RECORD > (II) LoadModule: "siliconmotion" > (II) Loading /usr/local/lib/xorg/modules/drivers//siliconmotion_drv.so > (II) Module siliconmotion: vendor="X.Org Foundation" > compiled for 1.6.5, module version = 1.7.3 > Module class: X.Org Video Driver > ABI class: X.Org Video Driver, version 5.0 > (II) LoadModule: "mouse" > (II) Loading /usr/local/lib/xorg/modules/input//mouse_drv.so > (II) Module mouse: vendor="X.Org Foundation" > compiled for 1.6.5, module version = 1.4.0 > Module class: X.Org XInput Driver > ABI class: X.Org XInput driver, version 4.0 > (II) LoadModule: "kbd" > (II) Loading /usr/local/lib/xorg/modules/input//kbd_drv.so > (II) Module kbd: vendor="X.Org Foundation" > compiled for 1.6.5, module version = 1.3.2 > Module class: X.Org XInput Driver > ABI class: X.Org XInput driver, version 4.0 > > (II) SMI: driver (version 1.7.3) for Silicon Motion Lynx chipsets: Lynx, > LynxE, Lynx3D, LynxEM, LynxEM+, Lynx3DM, Cougar3DR, MSOC > (II) Primary Device is: PCI 0...@00:09:0 > (WW) Falling back to old probe method for siliconmotion > (**) Chipset override: lynxem+ > (**) Chipset LynxEM+ found > (II) resource ranges after xf86ClaimFixedResources() call: > [0] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] > [1] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] > [2] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] > [3] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] > [4] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] > (II) resource ranges after probing: > [0] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] > [1] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] > [2] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] > [3] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B] > [4] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] > [5] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B] > [6] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] > [7] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] > [8] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B] > [9] 0 0 0x000003c0 - 0x000003df (0x20) IS[B] > (II) Setting vga for screen 0. > (II) Loading sub module "vgahw" > (II) LoadModule: "vgahw" > (II) Loading /usr/local/lib/xorg/modules//libvgahw.so > (II) Module vgahw: vendor="X.Org Foundation" > compiled for 1.6.5, module version = 0.1.0 > > ABI class: X.Org Video Driver, version 5.0 > SMI_PreInit vgaCRIndex=4, vgaIOBase=0, MMIOBase=0x0 > > (**) SMI(0): Depth 16, (--) framebuffer bpp 16 > (==) SMI(0): RGB weight 565 > (==) SMI(0): Default visual is TrueColor > (**) SMI(0): Option "pci_burst" "on" > (**) SMI(0): Option "SWCursor" "true" > (**) SMI(0): Option "UseBIOS" "off" > (**) SMI(0): PCI Burst enabled > (==) SMI(0): PCI Retry enabled > (**) SMI(0): Using Software Cursor > (**) SMI(0): Option: UseBIOS disabled. > (**) SMI(0): Chipset: "lynxem+" > (==) SMI(0): Dual head disabled > (==) SMI(0): Using XAA acceleration architecture > (II) SMI(0): Physical MMIO at 0xFD400000 > (II) SMI(0): Logical MMIO at 0x28c00000 - 0x28ffffff > (II) SMI(0): DPR=0x28c08000, VPR=0x28c0c000, IOBase=0x28f00000 > (II) SMI(0): DataPort=0x28c00000 - 0x28c07fff > (--) SMI(0): videoram: 4096kB > (II) SMI(0): Physical frame buffer at 0xFD000000 offset: 0x00000000 > (II) SMI(0): Logical frame buffer at 0x29000000 - 0x293fffff > (II) SMI(0): Cursor Offset: 003FFC00 > > (II) SMI(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is > 0x0000 > (II) SMI(0): Reserved: 003FF800 > > (II) SMI(0): TFT Panel Size = 800x600 > (II) Loading sub module "i2c" > (II) LoadModule: "i2c" > (II) Module "i2c" already built-in > (II) SMI(0): I2C bus "I2C bus" initialized. > (II) Loading sub module "ddc" > (II) LoadModule: "ddc" > (II) Module "ddc" already built-in > (==) SMI(0): Using gamma correction (1.0, 1.0, 1.0) > (II) SMI(0): MCLK = 157.000 > (II) SMI(0): Output LVDS using monitor section FIVA 8.4inch LCD > (II) SMI(0): Output LVDS connected > (II) SMI(0): Using user preference for initial modes > (II) SMI(0): Output LVDS using initial mode 800x600 > (==) SMI(0): DPI set to (96, 96) > (II) Loading sub module "fb" > (II) LoadModule: "fb" > (II) Loading /usr/local/lib/xorg/modules//libfb.so > (II) Module fb: vendor="X.Org Foundation" > compiled for 1.6.5, module version = 1.0.0 > ABI class: X.Org ANSI C Emulation, version 0.4 > (II) Loading sub module "xaa" > (II) LoadModule: "xaa" > (II) Loading /usr/local/lib/xorg/modules//libxaa.so > (II) Module xaa: vendor="X.Org Foundation" > compiled for 1.6.5, module version = 1.2.1 > > ABI class: X.Org Video Driver, version 5.0 > (II) do I need RAC? No, I don't. > (II) resource ranges after preInit: > [0] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] > [1] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] > [2] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] > [3] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B] > [4] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] > [5] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B] > [6] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] > [7] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] > [8] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B] > [9] 0 0 0x000003c0 - 0x000003df (0x20) IS[B] > (II) SMI(0): Physical MMIO at 0xFD400000 > (II) SMI(0): Logical MMIO at 0x28c00000 - 0x28ffffff > (II) SMI(0): DPR=0x28c08000, VPR=0x28c0c000, IOBase=0x28f00000 > (II) SMI(0): DataPort=0x28c00000 - 0x28c07fff > (II) SMI(0): Physical frame buffer at 0xFD000000 offset: 0x00000000 > (II) SMI(0): Logical frame buffer at 0x29000000 - 0x293fffff > (II) SMI(0): Cursor Offset: 003FFC00 > > (II) SMI(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is > 0x0000 > (II) SMI(0): Reserved: 003FF800 > (II) SMI(0): Saved current video mode. Register dump: > (II) SMI(0): START register dump ------------------ > MISCELLANEOUS OUTPUT > 67 > > SEQUENCER > x0 x1 x2 x3 x4 x5 x6 x7 x8 x9 xA xB xC xD xE xF > 00| 03 00 03 00 02 24 24 24 24 24 24 24 24 24 24 24 > 10| 40 01 10 00 00 0A 17 00 51 00 00 00 00 00 00 00 > 20| C4 30 02 00 01 00 00 00 00 00 00 00 00 00 00 00 > 30| 24 03 20 09 C0 24 24 24 24 24 24 24 00 00 03 FF > 40| 00 FC 00 00 20 18 00 FC 20 0C 44 20 00 24 24 24 > 50| 04 48 83 63 68 73 57 58 04 03 7B 24 24 00 00 24 > 60| 01 00 3E 1A 1A 00 20 00 50 04 12 02 1C 85 0B 04 > 70| 82 41 3F 35 04 00 24 24 24 24 24 24 24 24 24 24 > 80| FF 03 00 00 12 58 00 24 89 01 25 01 00 FF 24 24 > 90| 00 00 00 00 24 24 24 24 24 24 24 24 24 24 24 24 > A0| 00 00 00 2D C1 ED ED ED 01 07 46 08 81 37 28 40 > > CRT CONTROLLER > x0 x1 x2 x3 x4 x5 x6 x7 x8 x9 xA xB xC xD xE xF > 00| 5F 4F 50 02 53 81 BF 1F 00 4F 00 0F 00 00 FF FF > 10| 9C 0E 8F 28 1F 96 B9 A3 FF 00 00 00 00 00 00 00 > 30| 00 00 00 00 00 88 02 20 00 00 28 40 00 00 11 00 > 40| 7F 63 00 6B 1B 72 57 00 58 0C A2 20 4F 8F 00 00 > 90| 56 4A 5E 55 86 9D 8E AA 8A A3 DF 33 00 00 1B 00 > A0| 20 1F 1A 19 19 0F 0F 0A 00 00 00 00 00 00 > > GRAPHICS CONTROLLER > x0 x1 x2 x3 x4 x5 x6 x7 x8 x9 xA xB xC xD xE xF > 00| 00 00 00 00 00 10 0E 00 FF > > ATTRIBUTE 0CONTROLLER > x0 x1 x2 x3 x4 x5 x6 x7 x8 x9 xA xB xC xD xE xF > 00| 00 01 02 03 04 05 14 07 38 39 3A 3B 3C 3D 3E 3F > 10| 0C 00 0F 08 00 > > DPR x0 x4 x8 xC > 00| C000C000 F000F000 F320C258 000000F0 > 10| F320F320 FF000000 FFFEFEFE C0D4F000 > 20| FF000000 FFFFFFFF FFFFFFFF F000C000 > 30| F320F320 77DDBBEE 77DDBBEE F320F320 > 40| FFF00000 FFF00000 > > VPR x0 x4 x8 xC > 00| 00020000 0000000F 00000000 00000000 > 10| 01420140 02E306E2 03F70200 0000A5C0 > 20| 02F30005 00000000 011A013E 022D0243 > 30| 0007386C 00020001 00000000 00000000 > 40| 00000000 00000000 00000000 00000000 > 50| 00000000 01026543 00000542 00EDEDED > 60| 000001BE > > CPR x0 x4 x8 xC > 00| 00000008 00000004 00000010 00041441 > 10| 00006200 00000141 00000006 > > > (II) SMI(0): END register dump -------------------- > > (II) SMI(0): DPMS enabled > (II) SMI(0): I2C device "I2C bus:SAA 7111A" registered at address 0x48. > (II) SMI(0): I2C device "I2C bus:SAA 7111A" removed. > (II) SMI(0): RandR 1.2 enabled, ignore the following RandR disabled > message. > (WW) SMI(0): Option "fifo_conservative" is not used > (--) RandR disabled > (II) Setting vga for screen 0. > (II) Initializing built-in extension Generic Event Extension > (II) Initializing built-in extension SHAPE > (II) Initializing built-in extension MIT-SHM > (II) Initializing built-in extension XInputExtension > (II) Initializing built-in extension XTEST > (II) Initializing built-in extension BIG-REQUESTS > (II) Initializing built-in extension SYNC > (II) Initializing built-in extension XKEYBOARD > (II) Initializing built-in extension XC-MISC > (II) Initializing built-in extension XINERAMA > (II) Initializing built-in extension XFIXES > (II) Initializing built-in extension RENDER > (II) Initializing built-in extension RANDR > (II) Initializing built-in extension COMPOSITE > (II) Initializing built-in extension DAMAGE > (II) AIGLX: Loaded and initialized /usr/local/lib/dri/swrast_dri.so > (II) GLX: Initialized DRISWRAST GL provider for screen 0 > (II) SMI(0): Setting screen physical size to 211 x 158 > [dix] Could not init font path element <80>, removing from list! > (**) Option "Protocol" "Auto" > (**) FIVA Point: Device: "/dev/sysmouse" > (**) FIVA Point: Protocol: "Auto" > (**) Option "CorePointer" > (**) FIVA Point: always reports core events > (**) Option "Device" "/dev/sysmouse" > (==) FIVA Point: Emulate3Buttons, Emulate3Timeout: 50 > (**) FIVA Point: ZAxisMapping: buttons 4 and 5 > (**) FIVA Point: Buttons: 9 > (**) Option "SampleRate" "600" > (**) FIVA Point: SampleRate: 600 > (**) FIVA Point: Sensitivity: 1 > (II) XINPUT: Adding extended input device "FIVA Point" (type: MOUSE) > (**) FIVA Point: (accel) keeping acceleration scheme 1 > (**) FIVA Point: (accel) filter chain progression: 2.00 > (**) FIVA Point: (accel) filter stage 0: 20.00 ms > (**) FIVA Point: (accel) set acceleration profile 0 > (**) Option "Device" "/dev/sysmouse" > > (II) FIVA Point: SetupAuto: hw.iftype is 4, hw.model is 0 > (II) FIVA Point: SetupAuto: protocol is SysMouse > (**) Option "CoreKeyboard" > (**) FIVA Keyboard: always reports core events > (**) Option "Protocol" "standard" > (**) FIVA Keyboard: Protocol: standard > (**) Option "AutoRepeat" "500 30" > (**) Option "XkbRules" "xorg" > (**) FIVA Keyboard: XkbRules: "xorg" > (**) Option "XkbModel" "pc105" > (**) FIVA Keyboard: XkbModel: "pc105" > (**) Option "XkbLayout" "us" > (**) FIVA Keyboard: XkbLayout: "us" > (**) Option "CustomKeycodes" "off" > (**) FIVA Keyboard: CustomKeycodes disabled > (II) XINPUT: Adding extended input device "FIVA Keyboard" (type: KEYBOARD) > (II) config/hal: Adding input device AT Keyboard > (**) AT Keyboard: always reports core events > (**) Option "Protocol" "standard" > (**) AT Keyboard: Protocol: standard > (**) Option "AutoRepeat" "500 30" > (**) Option "XkbRules" "xorg" > (**) AT Keyboard: XkbRules: "xorg" > (**) Option "XkbModel" "pc105" > (**) AT Keyboard: XkbModel: "pc105" > (**) Option "XkbLayout" "us" > (**) AT Keyboard: XkbLayout: "us" > (**) Option "CustomKeycodes" "off" > (**) AT Keyboard: CustomKeycodes disabled > (II) XINPUT: Adding extended input device "AT Keyboard" (type: KEYBOARD) > (II) config/hal: Adding input device PS/2 Mouse > (**) PS/2 Mouse: Device: "/dev/psm0" > (==) PS/2 Mouse: Protocol: "Auto" > (**) PS/2 Mouse: always reports core events > (**) Option "Device" "/dev/psm0" > (==) PS/2 Mouse: Emulate3Buttons, Emulate3Timeout: 50 > (**) PS/2 Mouse: ZAxisMapping: buttons 4 and 5 > (**) PS/2 Mouse: Buttons: 9 > (**) PS/2 Mouse: Sensitivity: 1 > (II) XINPUT: Adding extended input device "PS/2 Mouse" (type: MOUSE) > (**) PS/2 Mouse: (accel) keeping acceleration scheme 1 > (**) PS/2 Mouse: (accel) filter chain progression: 2.00 > (**) PS/2 Mouse: (accel) filter stage 0: 20.00 ms > (**) PS/2 Mouse: (accel) set acceleration profile 0 > (**) Option "Device" "/dev/psm0" > > (II) PS/2 Mouse: SetupAuto: hw.iftype is 3, hw.model is 0 > (II) PS/2 Mouse: SetupAuto: protocol is PS/2 > (II) PS/2 Mouse: ps2EnableDataReporting: succeeded > >
_______________________________________________ xorg@lists.freedesktop.org: X.Org support Archives: http://lists.freedesktop.org/archives/xorg Info: http://lists.freedesktop.org/mailman/listinfo/xorg