I am trying to get dual head on ATI FirePro M5800 working. LVDS works, but VGA-0 is in power save mode no matter what I do.
My colleague got the non-free driver working, but I would prefer using the free driver. My research seems to indicate the chipset is called Redwood or r8xx or RV830 or r800 or Evergreen - but I could be wrong. I have been unable to find a guide for this card and the obvious (xrandr --output LVDS --output VGA-0 --left-of LVDS) does not work. Neither does KDE's gui config of display. Below is some output that may help. /Ole $ lspci |grep VGA 01:00.0 VGA compatible controller: ATI Technologies Inc Device 68c0 $ cat /etc/X11/xorg.conf Section "Screen" Identifier "Configured Screen Device" Device "Configured Video Device" SubSection "Display" Virtual 3280 1080 EndSubSection EndSection Section "Device" Identifier "Configured Video Device" EndSection $ xrandr Screen 0: minimum 320 x 200, current 1920 x 1080, maximum 3280 x 1080 LVDS connected 1920x1080+0+0 (normal left inverted right x axis y axis) 0mm x 0mm 1920x1080 59.9*+ 1680x1050 60.0 1600x1024 60.2 1400x1050 60.0 60.0 1280x1024 59.9 60.0 1440x900 59.9 59.9 1280x960 60.0 59.9 1280x854 59.9 1360x768 59.8 1280x800 59.8 1152x864 60.0 1280x720 59.9 1152x768 59.8 1024x768 60.0 59.9 800x600 60.3 59.9 640x480 59.9 59.4 DisplayPort-2 disconnected (normal left inverted right x axis y axis) DisplayPort-1 disconnected (normal left inverted right x axis y axis) DisplayPort-0 disconnected (normal left inverted right x axis y axis) VGA-0 connected (normal left inverted right x axis y axis) 1360x768 59.8 1152x864 60.0 1024x768 60.0 800x600 60.3 640x480 59.9 _______________________________________________ xorg@lists.freedesktop.org: X.Org support Archives: http://lists.freedesktop.org/archives/xorg Info: http://lists.freedesktop.org/mailman/listinfo/xorg Your subscription address: arch...@mail-archive.com