I am working to get multiple touchscreen support working. Both devices currently come up, however I need to apply a coordinate transformation matrix to the input, as documented here: http://lists.freedesktop.org/archives/xorg/2010-April/049967.html
This works fine from the command line, however I have a pair of devices. The touchscreens are uniquely identified via usb port with udev, so I have hardcoded /dev/input/ts1 and /dev/input/ts2 devices. However, I cannot script the xinput command, as I do not know which devices are which from the xinput list output. Each touchscreen reports two device ids: ⎡ Virtual core pointer id=2 [master pointer (3)] ⎜ ↳ Virtual core XTEST pointer id=4 [slave pointer (2)] ⎜ ↳ stylus id=6 [slave pointer (2)] ⎜ ↳ eraser id=7 [slave pointer (2)] ⎜ ↳ TPPS/2 IBM TrackPoint id=14 [slave pointer (2)] ⎜ ↳ HID 0430:0100 id=11 [slave pointer (2)] ⎜ ↳ TS Device id=12 [slave pointer (2)] ⎜ ↳ TS Device id=13 [slave pointer (2)] ⎜ ↳ TS Device id=14 [slave pointer (2)] ⎜ ↳ TS Device id=15 [slave pointer (2)] Is there a way to define the matrix in the xorg.conf file, or a way to match the ids above to their /dev/input device or USB port? Thanks, Scott _______________________________________________ xorg@lists.freedesktop.org: X.Org support Archives: http://lists.freedesktop.org/archives/xorg Info: http://lists.freedesktop.org/mailman/listinfo/xorg Your subscription address: arch...@mail-archive.com