I have got something like: http://www.amazon.co.uk/Perixx-PERIPAD-501-86x75x11mm-Industrial-Professional/dp/B001CX85I8
with lsusb it shows as: --8<---------------cut here---------------start------------->8--- Bus 001 Device 092: ID 099a:a002 Zippy Technology Corp. --8<---------------cut here---------------end--------------->8--- Relevant xorg logs are --8<---------------cut here---------------start------------->8--- [1291767.832] (II) config/udev: Adding input device Mouse Pad (/dev/input/mouse1) [1291767.832] (**) Mouse Pad: Applying InputClass "mousepad" [1291767.832] (II) No input driver specified, ignoring this device. [1291767.832] (II) This device may have been added with another device file. [1291767.837] (II) config/udev: Adding input device Mouse Pad (/dev/input/event7) [1291767.837] (**) Mouse Pad: Applying InputClass "evdev pointer catchall" [1291767.837] (**) Mouse Pad: Applying InputClass "mousepad" [1291767.837] (**) Mouse Pad: Applying InputClass "evdev pointer catchall" [1291767.837] (II) Using input driver 'evdev' for 'Mouse Pad' [1291767.837] (**) Mouse Pad: always reports core events [1291767.837] (**) evdev: Mouse Pad: Device: "/dev/input/event7" [1291767.837] (--) evdev: Mouse Pad: Vendor 0x99a Product 0xa002 [1291767.837] (--) evdev: Mouse Pad: Found 3 mouse buttons [1291767.837] (--) evdev: Mouse Pad: Found scroll wheel(s) [1291767.837] (--) evdev: Mouse Pad: Found relative axes [1291767.837] (--) evdev: Mouse Pad: Found x and y relative axes [1291767.838] (II) evdev: Mouse Pad: Configuring as mouse [1291767.838] (II) evdev: Mouse Pad: Adding scrollwheel support [1291767.838] (**) Option "Emulate3Buttons" "on" [1291767.838] (**) evdev: Mouse Pad: YAxisMapping: buttons 4 and 5 [1291767.838] (**) evdev: Mouse Pad: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [1291767.838] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.1/usb1/1-4/1-4.2/1-4.2:1.0/input/input70/event7" [1291767.838] (II) XINPUT: Adding extended input device "Mouse Pad" (type: MOUSE, id 8) [1291767.838] (II) evdev: Mouse Pad: initialized for relative axes. [1291767.838] (**) Mouse Pad: (accel) keeping acceleration scheme 1 [1291767.838] (**) Mouse Pad: (accel) acceleration profile 0 [1291767.839] (**) Mouse Pad: (accel) acceleration factor: 2.000 [1291767.839] (**) Mouse Pad: (accel) acceleration threshold: 4 --8<---------------cut here---------------end--------------->8--- I added Input section for it: --8<---------------cut here---------------start------------->8--- Section "InputClass" Identifier "mousepad" MatchProduct "Mouse Pad" Option "Emulate3Buttons" "on" EndSection --8<---------------cut here---------------end--------------->8--- And now everything works fine except two things: 1. Cannot disable tapping. I tried to use "synaptic" driver for this device, but got only something like "cannot determine protocol". 2. How can I tune acceleration? KJ -- http://sporothrix.wordpress.com/2011/01/16/usa-sie-krztusza-kto-nastepny/ The only reward of virtue is virtue. -- Ralph Waldo Emerson _______________________________________________ xorg@lists.x.org: X.Org support Archives: http://lists.freedesktop.org/archives/xorg Info: http://lists.x.org/mailman/listinfo/xorg Your subscription address: arch...@mail-archive.com