Looking thru a couple of months of list archives turned up nothing, so:
When running 4.1.0 on my laptop using a S3Virge MX, my system clock loses
at least two seconds per minute.
I've done everything I can to narrow this down, and the bottom line is
when X is running, even in a "fresh" weave (running "X" only), even when
the VT is not active, my clock is slowed. I've tried pulling out all
the optional stuff (fifo_aggressive, the pci-burst/retry stuff,
NoPM, you name it). I've got an AMD K6-2 at 400MHz.
The relevant files are below (I used to hate MIME in mailing lists, so I
won't start now that I use a compliant mail program; no attachments unless
they're OK here).
uname -a
----
Linux prostar 2.2.19 #7 Wed Jan 2 13:13:14 PST 2002 i586 i386
----
XF86Config
----
Section "Files"
FontPath "unix/:-1"
EndSection
Section "ServerFlags"
Option "DontZoom"
Option "DisableVidModeExtention"
Option "standby time" "20"
Option "suspend time" "30"
Option "off time" "60"
# Option "NoPM" # causes corruption on S3V/MX if on
EndSection
Section "Module"
Load "dbe"
SubSection "extmod"
EndSubSection
Load "glx"
Load "type1"
Load "freetype"
Load "speedo"
EndSection
Section "InputDevice"
Identifier "Keyboard"
Driver "keyboard"
Option "CoreKeyboard"
Option "AlwaysCore"
Option "AutoRepeat" "500 50"
# Option "XkbModel" "pc104"
EndSection
Section "InputDevice"
Identifier "Mouse"
Driver "mouse"
Option "CorePointer"
Option "AlwaysCore"
Option "Protocol" "PS/2"
Option "Device" "/dev/mouse"
Option "Emulate3Buttons"
Option "Emulate3Timeout" "50"
EndSection
Section "Monitor"
Identifier "ProScan 1200T"
VendorName "ProScan"
ModelName "1024x768 14.1 in. TFT"
Gamma 1.6
HorizSync 31.5 - 68.8
VertRefresh 60 - 87
DisplaySize 284 215
Option "dpms"
# 800x600 @ 72 Hz, 48.0 kHz hsync
Modeline "800x600" 50 800 856 976 1040 600 637 643 666
# 1024x768 @ 76 Hz, 62.5 kHz hsync
Modeline "1024x768" 68 1024 1030 1150 1340 768 780 782 810
EndSection
Section "Device"
Identifier "S3 ViRGE/MX"
VendorName "S3"
Driver "s3virge"
BoardName "ViRGE/MX"
Option "fifo_aggressive"
Option "pci_burst"
Option "pci_retry"
EndSection
Section "Screen"
Identifier "LCD"
Device "S3 ViRGE/MX"
Monitor "ProScan 1200T"
# Option "backing_store"
DefaultDepth 24
Subsection "Display"
Depth 8
Modes "1024x768"
EndSubsection
Subsection "Display"
Depth 16
Modes "1024x768"
EndSubsection
Subsection "Display"
Depth 24
Modes "1024x768"
EndSubsection
Subsection "Display"
Depth 32
Modes "1024x768"
EndSubsection
EndSection
Section "ServerLayout"
Identifier "LCD"
Screen "LCD"
InputDevice "Mouse"
InputDevice "Keyboard"
EndSection
----
XFree86.0.log:
----
XFree86 Version 4.1.0 / X Window System
(protocol Version 11, revision 0, vendor release 6510)
Release Date: 2 June 2001
If the server is older than 6-12 months, or if your card is
newer than the above date, look for a newer version before
reporting problems. (See http://www.XFree86.Org/FAQ)
Build Operating System: Linux 2.4.5 i686 [ELF]
Module Loader present
(==) Log file: "/var/log/XFree86.0.log", Time: Wed Jan 2 22:17:34 2002
(==) Using config file: "/etc/X11/XF86Config"
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) ServerLayout "LCD"
(**) |-->Screen "LCD" (0)
(**) | |-->Monitor "ProScan 1200T"
(**) | |-->Device "S3 ViRGE/MX"
(**) |-->Input Device "Mouse"
(**) |-->Input Device "Keyboard"
(**) Option "AutoRepeat" "500 50"
(==) Keyboard: CustomKeycode disabled
(**) FontPath set to "unix/:-1"
(==) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(**) Option "DontZoom"
(**) Option "StandbyTime" "20"
(**) Option "SuspendTime" "30"
(**) Option "OffTime" "60"
(++) using VT number 8
(II) Open APM successful
(II) Module ABI versions:
XFree86 ANSI C Emulation: 0.1
XFree86 Video Driver: 0.4
XFree86 XInput driver : 0.2
XFree86 Server Extension : 0.1
XFree86 Font Renderer : 0.2
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.2
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.4
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x8000508c, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,7100 card 0000,0000 rev 01 class 06,00,00 hdr 00
(II) PCI: 00:07:0: chip 8086,7110 card 0000,0000 rev 02 class 06,80,00 hdr 80
(II) PCI: 00:07:1: chip 8086,7111 card 0000,0000 rev 01 class 01,01,80 hdr 00
(II) PCI: 00:07:2: chip 8086,7112 card 0000,0000 rev 01 class 0c,03,00 hdr 00
(II) PCI: 00:07:3: chip 8086,7113 card 0000,0000 rev 02 class 06,80,00 hdr 00
(II) PCI: 00:08:0: chip 5333,8c01 card abcd,1100 rev 06 class 03,00,00 hdr 00
(II) PCI: 00:0a:0: chip 104c,ac1c card 0000,0000 rev 01 class 06,07,00 hdr 82
(II) PCI: 00:0a:1: chip 104c,ac1c card 0000,0000 rev 01 class 06,07,00 hdr 82
(II) PCI: End of PCI scan
(II) LoadModule: "scanpci"
(II) Loading /usr/X11R6/lib/modules/libscanpci.a
(II) Module scanpci: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.4
(II) UnloadModule: "scanpci"
(II) Unloading /usr/X11R6/lib/modules/libscanpci.a
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (-1,0,0), BCTRL: 0x08 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0x00000000 - 0xffffffff (0x0) MX[B]
(--) PCI:*(0:8:0) S3 ViRGE/MX rev 6, Mem @ 0xc0000000/26, BIOS @ 0x000c0000/16
(II) Addressable bus resource ranges are
[0] -1 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0x00000000 - 0x000000ff (0x100) IX[B]
(II) Active PCI resource ranges:
[0] -1 0x000c0000 - 0x000cffff (0x10000) MX[B](B)
[1] -1 0xc0000000 - 0xc3ffffff (0x4000000) MX[B](B)
[2] -1 0x0000f300 - 0x0000f3ff (0x100) IX[B]E
[3] -1 0x00001100 - 0x000011ff (0x100) IX[B]E
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0x000c0000 - 0x000cffff (0x10000) MX[B](B)
[1] -1 0xc0000000 - 0xc3ffffff (0x4000000) MX[B](B)
[2] -1 0x0000f300 - 0x0000f3ff (0x100) IX[B]E
[3] -1 0x00001100 - 0x000011ff (0x100) IX[B]E
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000cffff (0x10000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000cffff (0x10000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0x000c0000 - 0x000cffff (0x10000) MX[B](B)
[6] -1 0xc0000000 - 0xc3ffffff (0x4000000) MX[B](B)
[7] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[8] -1 0x00000000 - 0x000000ff (0x100) IX[B]
[9] -1 0x0000f300 - 0x0000f3ff (0x100) IX[B]E
[10] -1 0x00001100 - 0x000011ff (0x100) IX[B]E
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
(II) Module glx: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.1
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Module GLcore: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension GLX
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.2
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a
(II) Module freetype: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.1.9
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.2
(II) Loading font FreeType
(II) LoadModule: "speedo"
(II) Loading /usr/X11R6/lib/modules/fonts/libspeedo.a
(II) Module speedo: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.2
(II) Loading font Speedo
(II) LoadModule: "s3virge"
(II) Loading /usr/X11R6/lib/modules/drivers/s3virge_drv.o
(II) Module s3virge: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.6.0
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.4
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
Module class: XFree86 XInput Driver
ABI class: XFree86 XInput driver, version 0.2
S3VIdentify
(II) S3VIRGE: driver (version 1.6.0) for S3 ViRGE chipsets: virge, 86C325,
virge vx, 86C988, virge dx, virge gx, 86C375, 86C385, virge gx2,
86C357, virge mx, 86C260, virge mx+, 86C280, trio 3d, 86C365,
trio 3d/2x, 86C362, 86C368
(II) Primary Device is: PCI 00:08:0
S3VProbe begin
(--) Assigning device section with no busID to primary device
(--) Chipset virge mx found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000cffff (0x10000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0x000c0000 - 0x000cffff (0x10000) MX[B](B)
[6] -1 0xc0000000 - 0xc3ffffff (0x4000000) MX[B](B)
[7] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[8] -1 0x00000000 - 0x000000ff (0x100) IX[B]
[9] -1 0x0000f300 - 0x0000f3ff (0x100) IX[B]E
[10] -1 0x00001100 - 0x000011ff (0x100) IX[B]E
S3VProbe end
(II) resource ranges after probing:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000cffff (0x10000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0x000c0000 - 0x000cffff (0x10000) MX[B](B)
[6] -1 0xc0000000 - 0xc3ffffff (0x4000000) MX[B](B)
[7] 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[8] 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[9] 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[10] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[11] -1 0x00000000 - 0x000000ff (0x100) IX[B]
[12] -1 0x0000f300 - 0x0000f3ff (0x100) IX[B]E
[13] -1 0x00001100 - 0x000011ff (0x100) IX[B]E
[14] 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[15] 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
S3VPreInit 1
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.4
(**) S3VIRGE(0): Depth 24, (--) framebuffer bpp 24
(==) S3VIRGE(0): RGB weight 888
(==) S3VIRGE(0): Default visual is TrueColor
S3VGetRec
(**) S3VIRGE(0): Option "pci_burst"
(**) S3VIRGE(0): Option "fifo_aggressive"
(**) S3VIRGE(0): Option "pci_retry"
(**) S3VIRGE(0): Option: pci_burst - PCI burst read enabled
(**) S3VIRGE(0): Option: pci_retry
(**) S3VIRGE(0): Option: fifo_aggressive set
(==) S3VIRGE(0): Using HW Cursor
(==) S3VIRGE(0): Using fb.
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/X11R6/lib/modules/libvbe.a
(II) Module vbe: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.4
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.4
(II) S3VIRGE(0): initializing int10
(II) S3VIRGE(0): Primary V_BIOS segment is: 0xc000
(II) S3VIRGE(0): VESA BIOS detected
(II) S3VIRGE(0): VESA VBE Version 2.0
(II) S3VIRGE(0): VESA VBE Total Mem: 4096 kB
(II) S3VIRGE(0): VESA VBE OEM: S3 Incorporated. M5 BIOS
(II) S3VIRGE(0): VESA VBE OEM Software Rev: 1.0
(II) S3VIRGE(0): VESA VBE OEM Vendor: S3 Incorporated.
(II) S3VIRGE(0): VESA VBE OEM Product: VBE 2.0
(II) S3VIRGE(0): VESA VBE OEM Product Rev: Rev 1.1
(--) S3VIRGE(0): Chipset: "virge mx"
S3VMapMem
S3VEnableMmio
S3VPreInit vgaCRIndex=3d4, vgaIOBase=3d0, MMIOBase=40218000
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.4
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Reloading /usr/X11R6/lib/modules/libddc.a
(II) S3VIRGE(0): VESA VBE DDC supported
(II) S3VIRGE(0): VESA VBE DDC Level none
(II) S3VIRGE(0): VESA VBE DDC transfer in appr. 0 sec.
(II) S3VIRGE(0): VESA VBE DDC read failed
(--) S3VIRGE(0): No DDC signal
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Loading /usr/X11R6/lib/modules/libi2c.a
(II) Module i2c: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.2.0
ABI class: XFree86 Video Driver, version 0.4
(II) S3VIRGE(0): I2C bus "I2C bus" initialized.
(II) S3VIRGE(0): I2C device "I2C bus:ddc2" registered.
(II) S3VIRGE(0): I2C device "I2C bus:ddc2" removed.
(**) S3VIRGE(0): Using gamma correction (1.6, 1.6, 1.6)
(--) S3VIRGE(0): videoram: 4096k
(--) S3VIRGE(0): assuming RefCLK value of 14.318 MHz
(--) S3VIRGE(0): Detected current MCLK value of 83.045 MHz
(--) S3VIRGE(0): LCD size 1024x768, clock 65.028 MHz
S3VDisableMmio
S3VPreInit minClock=20000, maxClock=270000
(II) S3VIRGE(0): ProScan 1200T: Using hsync range of 31.50-68.80 kHz
(II) S3VIRGE(0): ProScan 1200T: Using vrefresh range of 60.00-87.00 Hz
(II) S3VIRGE(0): Clock range: 20.00 to 270.00 MHz
(II) S3VIRGE(0): Not using default mode "1280x960" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "1280x1024" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "1280x1024" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "1600x1200" (insufficient memory for mode)
(II) S3VIRGE(0): Not using default mode "1600x1200" (insufficient memory for mode)
(II) S3VIRGE(0): Not using default mode "1600x1200" (insufficient memory for mode)
(II) S3VIRGE(0): Not using default mode "1600x1200" (insufficient memory for mode)
(II) S3VIRGE(0): Not using default mode "1600x1200" (insufficient memory for mode)
(II) S3VIRGE(0): Not using default mode "1792x1344" (insufficient memory for mode)
(II) S3VIRGE(0): Not using default mode "1792x1344" (insufficient memory for mode)
(II) S3VIRGE(0): Not using default mode "1856x1392" (insufficient memory for mode)
(II) S3VIRGE(0): Not using default mode "1856x1392" (insufficient memory for mode)
(II) S3VIRGE(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) S3VIRGE(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) S3VIRGE(0): Not using default mode "1400x1050" (insufficient memory for mode)
(II) S3VIRGE(0): Not using default mode "1400x1050" (insufficient memory for mode)
(--) S3VIRGE(0): Virtual size is 1024x768 (pitch 1024)
(**) S3VIRGE(0): Mode "1024x768": 68.0 MHz, 50.7 kHz, 62.6 Hz
(II) S3VIRGE(0): Modeline "1024x768" 68.00 1024 1030 1150 1340 768 780 782 810
(null)
(**) S3VIRGE(0): Display dimensions: (284, 215) mm
(**) S3VIRGE(0): DPI set to (91, 90)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
ABI class: XFree86 ANSI C Emulation, version 0.1
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.4
(==) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0xc0000000 - 0xc3ffffff (0x4000000) MS[B]
[1] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[2] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[3] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[4] -1 0x000c0000 - 0x000cffff (0x10000) MX[B]
[5] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[6] -1 0x000c0000 - 0x000cffff (0x10000) MX[B](B)
[7] -1 0xc0000000 - 0xc3ffffff (0x4000000) MX[B](B)
[8] 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
[9] 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
[10] 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
[11] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[12] -1 0x00000000 - 0x000000ff (0x100) IX[B]
[13] -1 0x0000f300 - 0x0000f3ff (0x100) IX[B]E
[14] -1 0x00001100 - 0x000011ff (0x100) IX[B]E
[15] 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
[16] 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
S3VScreenInit
S3VMapMem
(==) S3VIRGE(0): Write-combining range (0xc0000000,0x400000)
S3VEnableMmio
S3VSave
(II) S3VIRGE(0): MMPR regs: ffffffff ffffffff ffffffff ffffffff
ViRGE driver: saved current video mode. Register dump:
(II) S3VIRGE(0): START register dump ------------------
Misc Out[3CC]
e7
CR[00-2f]
5f 4f 50 82 55 81 0b 3e 00 47 06 07 00 00 3f ff
ea 0c df 28 1f e7 04 a3 ff ff ff ff ff ff ff ff
ff ff 80 ff 30 30 30 30 30 30 30 30 30 8c 01 06
SR[00-27]
03 00 03 00 02 05 06 07 06 5e 40 00 0c 50 00 00
43 72 84 6b 00 02 a1 40 20 20 40 9f fc 3e 9c 33
ff 88 c2 36 c2 3d 40 e6
Gr Cont GR[00-0f]
00 00 00 00 00 10 0e 00 ff f9 fa fb fc fd fe ff
Att Cont AR[00-1f]
20 21 22 23 24 25 26 27 28 29 2a 2b 2c 2d 2e 2f
0c 00 0f 08 00 35 36 37 0c 00 0f 08 00 3d 3e 3f
CR[30-6f]
e1 05 40 00 00 00 7f 4b 4b a8 01 93 10 06 08 40
00 03 03 00 00 00 01 da d9 a6 ff 00 0f e0 c0 c0
00 00 00 08 00 00 00 00 43 c0 00 00 00 00 00 00
08 08 08 00 00 00 00 00 bf a0 80 02 00 ff 00 ff
(II) S3VIRGE(0): END register dump --------------------
S3VModeInit
S3VModeInit dclk=68000
S3VInitSTREAMS
S3VWriteMode
S3VGEReset sub_stat=b000
(II) S3VIRGE(0): ViRGE driver: done restoring mode, dumping CR registers:
(II) S3VIRGE(0): START register dump ------------------
Misc Out[3CC]
2f
CR[00-2f]
a2 7f 7f 85 80 8f 28 f5 00 60 00 00 00 00 00 00
0c 2e ff 80 00 ff 28 c3 ff ff ff ff ff ff ff ff
ff ff 80 ff a0 a0 a0 a0 a0 a0 a0 a0 a0 8c 01 06
SR[00-27]
03 01 0f 00 0e 05 06 07 06 5e 40 00 0c 50 00 00
43 72 81 37 00 83 a1 40 00 20 40 9f fc 3e 9c 33
ff 88 c2 36 c2 3d 40 e6
Gr Cont GR[00-0f]
00 00 00 00 00 40 05 0f ff f9 fa fb fc fd fe ff
Att Cont AR[00-1f]
60 61 62 63 64 65 66 67 68 69 6a 6b 6c 6d 6e 6f
41 00 0f 00 00 35 36 37 41 00 0f 00 00 3d 3e 3f
CR[30-6f]
e1 8c 40 20 00 00 7f 4b 4b a8 10 91 51 06 58 40
00 77 57 00 00 00 01 da d9 a6 ff 00 0f e0 c0 c0
00 10 00 08 00 10 00 00 13 c0 00 00 00 00 40 40
08 08 08 08 08 20 89 74 bf a0 80 02 00 ff 00 ff
(II) S3VIRGE(0): END register dump --------------------
(**) S3VIRGE(0): Using FB
(II) S3VIRGE(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
CPU to Screen color expansion
Solid Horizontal and Vertical Lines
Image Writes
Offscreen Pixmaps
Setting up tile and stipple cache:
16 128x128 slots
4 256x256 slots
(==) S3VIRGE(0): Backing store disabled
(==) S3VIRGE(0): Silken mouse enabled
S3VDGAInit
S3VDGAInit firstone vpWid=1024, vpHgt=768, Bpp=3, mdbitsPP=24
S3VHWCursorInit
(**) Option "dpms"
(**) S3VIRGE(0): DPMS enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(**) Option "Protocol" "PS/2"
(**) Mouse: Protocol: "PS/2"
(**) Option "AlwaysCore"
(**) Mouse: always reports core events
(**) Option "CorePointer"
(**) Mouse: Core Pointer
(**) Option "Device" "/dev/mouse"
(==) Mouse: Buttons: 3
(**) Option "Emulate3Buttons"
(**) Option "Emulate3Timeout" "50"
(**) Mouse: Emulate3Buttons, Emulate3Timeout: 50
(II) Keyboard "Keyboard" handled by legacy driver
(II) XINPUT: Adding extended input device "Mouse" (type: MOUSE)
----
--
Kenneth R. Crudup Sr. SW Engineer, Scott County Consulting, Washington, D.C.
Home1: PO Box 914 Silver Spring, MD 20910-0914 [EMAIL PROTECTED]
Home2: 38010 Village Cmn. #217 Fremont, CA 94536-7525 (510) 745-0101
_______________________________________________
Xpert mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xpert
