Greetings, I'm trying to get X started with hardware support for my Voodoo-3 3000 (AGP). I'm running FreeBSD4.5-Release, X 4.2 compiled and installed from source and KDE 2.2.2 from the ports/pagkages. When I start X and look in /var/log/XFree86.0.log, there are these messages where a device open fails:
(II) TDFX(0): Minimum 338, Maximum 1279 lines of offscreen memory available drmOpenDevice: minor is 0 drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is -1, (Unknown error: 999() drmOpenDevice: Open failed drmOpenDevice: minor is 0 drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is -1, (Unknown error: 999() drmOpenDevice: Open failed drmOpenDevice: minor is 0 drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is -1, (Unknown error: 999() drmOpenDevice: Open failed drmOpenDevice: minor is 1 drmOpenDevice: node name is /dev/dri/card1 drmOpenDevice: open result is -1, (Unknown error: 999() drmOpenDevice: Open failed drmOpenDevice: minor is 2 drmOpenDevice: node name is /dev/dri/card2 drmOpenDevice: open result is -1, (Unknown error: 999() drmOpenDevice: Open failed drmOpenDevice: minor is 3 drmOpenDevice: node name is /dev/dri/card3 drmOpenDevice: open result is -1, (Unknown error: 999() drmOpenDevice: Open failed drmOpenDevice: minor is 4 drmOpenDevice: node name is /dev/dri/card4 drmOpenDevice: open result is -1, (Unknown error: 999() drmOpenDevice: Open failed drmOpenDevice: minor is 5 drmOpenDevice: node name is /dev/dri/card5 drmOpenDevice: open result is -1, (Unknown error: 999() drmOpenDevice: Open failed drmOpenDevice: minor is 6 drmOpenDevice: node name is /dev/dri/card6 drmOpenDevice: open result is -1, (Unknown error: 999() drmOpenDevice: Open failed drmOpenDevice: minor is 7 drmOpenDevice: node name is /dev/dri/card7 drmOpenDevice: open result is -1, (Unknown error: 999() drmOpenDevice: Open failed drmOpenDevice: minor is 8 drmOpenDevice: node name is /dev/dri/card8 drmOpenDevice: open result is -1, (Unknown error: 999() drmOpenDevice: Open failed drmOpenDevice: minor is 9 drmOpenDevice: node name is /dev/dri/card9 drmOpenDevice: open result is -1, (Unknown error: 999() drmOpenDevice: Open failed drmOpenDevice: minor is 10 drmOpenDevice: node name is /dev/dri/card10 drmOpenDevice: open result is -1, (Unknown error: 999() drmOpenDevice: Open failed drmOpenDevice: minor is 11 drmOpenDevice: node name is /dev/dri/card11 drmOpenDevice: open result is -1, (Unknown error: 999() drmOpenDevice: Open failed drmOpenDevice: minor is 12 drmOpenDevice: node name is /dev/dri/card12 drmOpenDevice: open result is -1, (Unknown error: 999() drmOpenDevice: Open failed drmOpenDevice: minor is 13 drmOpenDevice: node name is /dev/dri/card13 drmOpenDevice: open result is -1, (Unknown error: 999() drmOpenDevice: Open failed drmOpenDevice: minor is 14 drmOpenDevice: node name is /dev/dri/card14 drmOpenDevice: open result is -1, (Unknown error: 999() drmOpenDevice: Open failed (II) TDFX(0): [drm] drmOpen failed (EE) TDFX(0): [dri] DRIScreenInit failed, disabling DRI. When I look in /dev/dri the directory is empty. Everything else seems to load without error and I have checked and rechecked that I have all the "Load" commands in my XF86Config. Can anyone give me some info on how these "card<x>" devices are supposed to come into existence? I tried a "/dev/MAKEDEV all" but that had no affect. Any insight would be greatly appreciated. Thanks, Matthew ------------------- Section "ServerLayout" Identifier "XFree86 Configured" Screen 0 "Screen0" 0 0 InputDevice "Mouse0" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard" EndSection Section "Files" RgbPath "/usr/X11R6/lib/X11/rgb" ModulePath "/usr/X11R6/lib/modules" FontPath "/usr/X11R6/lib/X11/fonts/misc/" FontPath "/usr/X11R6/lib/X11/fonts/Speedo/" FontPath "/usr/X11R6/lib/X11/fonts/Type1/" FontPath "/usr/X11R6/lib/X11/fonts/CID/" FontPath "/usr/X11R6/lib/X11/fonts/75dpi/" FontPath "/usr/X11R6/lib/X11/fonts/100dpi/" EndSection Section "Module" Load "extmod" Load "glx" Load "dri" Load "dbe" Load "record" Load "xtrap" Load "speedo" Load "type1" EndSection Section "DRI" Mode 0666 EndSection Section "InputDevice" Identifier "Keyboard0" Driver "keyboard" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/mouse" EndSection Section "Monitor" #DisplaySize 330 240 # mm Identifier "Monitor0" VendorName "DEL" ModelName "DELL D1025HTX" Option "DPMS" HorizSync 30-70 VertRefresh 48-150 EndSection Section "Device" ### Available Driver options are:- ### Values: <i>: integer, <f>: float, <bool>: "True"/"False", ### <string>: "String", <freq>: "<f> Hz/kHz/MHz" ### [arg]: arg optional #Option "NoAccel" # [<bool>] #Option "SWcursor" # [<bool>] #Option "UsePIO" # [<bool>] #Option "ShowCache" # [<bool>] #Option "VideoKey" # <i> #Option "NoSLI" # [<bool>] #Option "TexturedVideo" # [<bool>] #Option "DRI" # [<bool>] Identifier "Card0" Driver "tdfx" VendorName "3dfx Interactive" BoardName "Voodoo3" BusID "PCI:1:0:0" EndSection Section "Screen" Identifier "Screen0" Device "Card0" Monitor "Monitor0" DefaultDepth 16 SubSection "Display" Depth 1 EndSubSection SubSection "Display" Depth 4 EndSubSection SubSection "Display" Depth 8 EndSubSection SubSection "Display" Depth 15 EndSubSection SubSection "Display" Depth 16 Modes "1024x768" EndSubSection SubSection "Display" Depth 24 Modes "1024x768" EndSubSection EndSection _______________________________________________ Xpert mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xpert