I'd try uncommenting the VideoRam lines for video drivers and up the amount of memory 
allocated to Video to at least 8196 (16384) if you can spare the RAM.

Make the changes in both XF86Config and XF86Config-4 in the /etc/X11 directories.

You probably need to ---------- Original Message ----------------------------------
From: Steven Castillo <[EMAIL PROTECTED]>
Date:  Wed, 3 Apr 2002 09:26:16 -0700 (MST)

>
>I have installed Mandrake 8.2 on an omnibook xe3-gf which has the intel 
>i830 video chipset.  The omnibook is capable of running at 1400x1050 in 
>windows xp.  However, I am only able to to run at 1280x1024 in linux.  
>Mandrake 8.2 uses the 2.4.18 linux kernel and xfree86 4.2.  Below are my 
>XF86Config and XFree86 log files.  Any suggestions would be 
>appreciated.
>
>-- 
>Steve Castillo
>[EMAIL PROTECTED]
>
>XF86Config file:
>
>
># File generated by XFdrake.
>
># **********************************************************************
># Refer to the XF86Config(4/5) man page for details about the format of
># this file.
># **********************************************************************
>
>Section "Files"
>
>    RgbPath    "/usr/X11R6/lib/X11/rgb"
>
># Multiple FontPath entries are allowed (they are concatenated together)
># By default, Mandrake 6.0 and later now use a font server independent of
># the X server to render fonts.
>
>    FontPath   "unix/:-1"
>
>EndSection
>
># **********************************************************************
># Server flags section.
># **********************************************************************
>
>Section "ServerFlags"
>
>    # Uncomment this to cause a core dump at the spot where a signal is
>    # received.  This may leave the console in an unusable state, but may
>    # provide a better stack trace in the core dump to aid in debugging
>    #NoTrapSignals
>
>    # Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
>    # This allows clients to receive this key event.
>    #DontZap
>
>    # Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
>    # sequences.  This allows clients to receive these key events.
>    #DontZoom
>
>    # This  allows  the  server  to start up even if the
>    # mouse device can't be opened/initialised.
>    AllowMouseOpenFail
>
>EndSection
>
># **********************************************************************
># Input devices
># **********************************************************************
>
># **********************************************************************
># Keyboard section
># **********************************************************************
>
>Section "InputDevice"
>
>    Identifier "Keyboard1"
>    Driver      "Keyboard"
>    Option "AutoRepeat"  "250 30"
>
>    Option "XkbRules" "xfree86"
>    Option "XkbModel" "pc105"
>    Option "XkbLayout" "us"
>
>EndSection
>
># **********************************************************************
># Pointer section
># **********************************************************************
>
>Section "InputDevice"
>
>    Identifier  "Mouse1"
>    Driver      "mouse"
>    Option "Protocol"    "PS/2"
>    Option "Device"      "/dev/mouse"
>    Option "Emulate3Buttons"
>    Option "Emulate3Timeout" "50"
>
># ChordMiddle is an option for some 3-button Logitech mice
>
>#    Option "ChordMiddle"
>
>EndSection
>
>
>
>Section "Module"
>
># This loads the DBE extension module.
>    Load       "dbe"
>
># This loads the Video for Linux module.
>    Load        "v4l"
>
>
># This loads the miscellaneous extensions module, and disables
># initialisation of the XFree86-DGA extension within that module.
>
>    SubSection "extmod"
>       #Option "omit xfree86-dga"
>    EndSubSection
>
># This loads the Type1 and FreeType font modules
>
>    Load       "type1"
>    Load       "freetype"
>EndSection
>
># **********************************************************************
># Monitor section
># **********************************************************************
>
># Any number of monitor sections may be present
>
>Section "Monitor"
>    Identifier "Generic|Generic Laptop Display Panel 1400x1050"
>    VendorName "Generic"
>    ModelName  "Unknown"
>
>
># HorizSync is in kHz unless units are specified.
># HorizSync may be a comma separated list of discrete values, or a
># comma separated list of ranges of values.
># NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
># USER MANUAL FOR THE CORRECT NUMBERS.
>    HorizSync  31.5-90
>
>
># VertRefresh is in Hz unless units are specified.
># VertRefresh may be a comma separated list of discrete values, or a
># comma separated list of ranges of values.
># NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
># USER MANUAL FOR THE CORRECT NUMBERS.
>    VertRefresh 59-75
>
>
># This is a set of extended mode timings typically used for laptop,
># TV fullscreen mode or DVD fullscreen output.
># These are available along with standard mode timings.
>
># Sony Vaio C1(X,XS,VE,VN)?
># 1024x480 @ 85.6 Hz, 48 kHz hsync
>ModeLine "1024x480"    65.00 1024 1032 1176 1344   480  488  494  563 -hsync -vsync
>
># 768x576 @ 79 Hz, 50 kHz hsync
>ModeLine "768x576"     50.00  768  832  846 1000   576  590  595  630
># 768x576 @ 100 Hz, 61.6 kHz hsync
>ModeLine "768x576"     63.07  768  800  960 1024   576  578  590  616
>
>
>EndSection
>
>
>Section "Monitor"
>    Identifier "monitor2"
>    VendorName "Generic"
>    ModelName  "Unknown"
>
>    HorizSync   31.5-90
>    VertRefresh 59-75
>EndSection
>
>
>
># **********************************************************************
># Graphics device section
># **********************************************************************
>
>Section "Device"
>    Identifier "Generic VGA"
>    Driver     "vga"
>EndSection
>
>Section "Device"
>    Identifier  "Intel 830 1"
>    VendorName  ""
>    BoardName   ""
>    Driver      "i810"
>#    VideoRam    4096
>    # Clock lines
>
>
>    # Uncomment following option if you see a big white block        
>    # instead of the cursor!                                          
>    #    Option      "sw_cursor"
>
>    Option      "DPMS"  "on"
>    BusID       "PCI:0:2:0"
>EndSection
>
>
>Section "Device"
>    Identifier  "Intel 830 2"
>    VendorName  ""
>    BoardName   ""
>    Driver      "i810"
>#    VideoRam    4096
>    # Clock lines
>
>
>    # Uncomment following option if you see a big white block        
>    # instead of the cursor!                                          
>    #    Option      "sw_cursor"
>
>    Option      "DPMS"  "on"
>    BusID       "PCI:0:2:1"
>EndSection
>
>
>
># **********************************************************************
># Screen sections
># **********************************************************************
>
>
>Section "Screen"
>    Identifier "screen1"
>    Device      "Intel 830 1"
>    Monitor     "Generic|Generic Laptop Display Panel 1400x1050"
>    DefaultColorDepth 16
>    Subsection "Display"
>        Depth       8
>        Modes       "1400x1050" "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
>        ViewPort    0 0
>    EndSubsection
>    Subsection "Display"
>        Depth       15
>        Modes       "1400x1050" "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
>        ViewPort    0 0
>    EndSubsection
>    Subsection "Display"
>        Depth       16
>        Modes       "1400x1050" "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
>        ViewPort    0 0
>    EndSubsection
>    Subsection "Display"
>        Depth       24
>        Modes       "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
>        ViewPort    0 0
>    EndSubsection
>    Subsection "Display"
>        Depth       32
>        Modes       "1152x864" "1024x768" "800x600" "640x480"
>        ViewPort    0 0
>    EndSubsection
>EndSection
>
>Section "Screen"
>    Identifier "screen2"
>    Device      "Intel 830 2"
>    Monitor     "monitor2"
>    DefaultColorDepth 16
>    Subsection "Display"
>        Depth       8
>        Modes       "1400x1050" "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
>        ViewPort    0 0
>    EndSubsection
>    Subsection "Display"
>        Depth       15
>        Modes       "1400x1050" "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
>        ViewPort    0 0
>    EndSubsection
>    Subsection "Display"
>        Depth       16
>        Modes       "1400x1050" "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
>        ViewPort    0 0
>    EndSubsection
>    Subsection "Display"
>        Depth       24
>        Modes       "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
>        ViewPort    0 0
>    EndSubsection
>    Subsection "Display"
>        Depth       32
>        Modes       "1152x864" "1024x768" "800x600" "640x480"
>        ViewPort    0 0
>    EndSubsection
>EndSection
>
>
>Section "ServerLayout"
>    Identifier "layout1"
>    Screen     "screen1"
>    Screen     "screen2" RightOf "screen1"
>#    Option     "Xinerama" "on"
>
>    InputDevice "Mouse1" "CorePointer"
>
>    InputDevice "Keyboard1" "CoreKeyboard"
>EndSection
>
>******************************************************************
>XFree86.0.log file:
>
>
>XFree86 Version 4.2.0 / X Window System
>(protocol Version 11, revision 0, vendor release 6600)
>Release Date: 23 January 2002
>       If the server is older than 6-12 months, or if your card is
>       newer than the above date, look for a newer version before
>       reporting problems.  (See http://www.XFree86.Org/)
>Build Operating System: Linux 2.4.18-1mdksmp i686 [ELF] 
>Module Loader present
>Markers: (--) probed, (**) from config file, (==) default setting,
>         (++) from command line, (!!) notice, (II) informational,
>         (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
>(==) Log file: "/var/log/XFree86.0.log", Time: Wed Mar 27 18:36:42 2002
>(==) Using config file: "/etc/X11/XF86Config-4"
>(==) ServerLayout "layout1"
>(**) |-->Screen "screen1" (0)
>(**) |   |-->Monitor "Generic|Generic Laptop Display Panel 1400x1050"
>(**) |   |-->Device "Intel 830 1"
>(**) |-->Screen "screen2" (1)
>(**) |   |-->Monitor "monitor2"
>(**) |   |-->Device "Intel 830 2"
>(**) |-->Input Device "Mouse1"
>(**) |-->Input Device "Keyboard1"
>(**) Option "AutoRepeat" "250 30"
>(**) Option "XkbRules" "xfree86"
>(**) XKB: rules: "xfree86"
>(**) Option "XkbModel" "pc105"
>(**) XKB: model: "pc105"
>(**) Option "XkbLayout" "us"
>(**) XKB: layout: "us"
>(==) Keyboard: CustomKeycode disabled
>(**) FontPath set to "unix/:-1"
>(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
>(==) ModulePath set to "/usr/X11R6/lib/modules"
>(**) Option "AllowMouseOpenFail"
>(--) using VT number 7
>
>(II) Open APM successful
>(II) Module ABI versions:
>       XFree86 ANSI C Emulation: 0.1
>       XFree86 Video Driver: 0.5
>       XFree86 XInput driver : 0.3
>       XFree86 Server Extension : 0.1
>       XFree86 Font Renderer : 0.3
>(II) Loader running on linux
>(II) LoadModule: "bitmap"
>(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
>(II) Module bitmap: vendor="The XFree86 Project"
>       compiled for 4.2.0, module version = 1.0.0
>       Module class: XFree86 Font Renderer
>       ABI class: XFree86 Font Renderer, version 0.3
>(II) Loading font Bitmap
>(II) LoadModule: "pcidata"
>(II) Loading /usr/X11R6/lib/modules/libpcidata.a
>(II) Module pcidata: vendor="The XFree86 Project"
>       compiled for 4.2.0, module version = 0.1.0
>       ABI class: XFree86 Video Driver, version 0.5
>(II) PCI: Probing config type using method 1
>(II) PCI: Config type is 1
>(II) PCI: stages = 0x03, oldVal1 = 0x8000f800, mode1Res1 = 0x80000000
>(II) PCI: PCI scan (all values are in hex)
>(II) PCI: 00:00:0: chip 8086,3575 card 8086,1969 rev 03 class 06,00,00 hdr 00
>(II) PCI: 00:02:0: chip 8086,3577 card 103c,0021 rev 03 class 03,00,00 hdr 80
>(II) PCI: 00:02:1: chip 8086,3577 card 103c,0021 rev 00 class 03,80,00 hdr 80
>(II) PCI: 00:1d:0: chip 8086,2482 card 103c,0021 rev 01 class 0c,03,00 hdr 80
>(II) PCI: 00:1d:1: chip 8086,2484 card 103c,0021 rev 01 class 0c,03,00 hdr 00
>(II) PCI: 00:1d:2: chip 8086,2487 card 103c,0021 rev 01 class 0c,03,00 hdr 00
>(II) PCI: 00:1e:0: chip 8086,2448 card 0000,0000 rev 41 class 06,04,00 hdr 01
>(II) PCI: 00:1f:0: chip 8086,248c card 0000,0000 rev 01 class 06,01,00 hdr 80
>(II) PCI: 00:1f:1: chip 8086,248a card 103c,0021 rev 01 class 01,01,8a hdr 00
>(II) PCI: 00:1f:3: chip 8086,2483 card 103c,0021 rev 01 class 0c,05,00 hdr 00
>(II) PCI: 02:02:0: chip 125d,2838 card 103c,0020 rev 01 class 07,80,00 hdr 00
>(II) PCI: 02:03:0: chip 125d,1988 card 103c,0021 rev 12 class 04,01,00 hdr 00
>(II) PCI: 02:04:0: chip 1217,6933 card 0001,0000 rev 01 class 06,07,00 hdr 82
>(II) PCI: 02:04:1: chip 1217,6933 card 0001,0000 rev 01 class 06,07,00 hdr 82
>(II) PCI: 02:08:0: chip 8086,1031 card 103c,0021 rev 41 class 02,00,00 hdr 00
>(II) PCI: End of PCI scan
>(II) LoadModule: "scanpci"
>(II) Loading /usr/X11R6/lib/modules/libscanpci.a
>(II) Module scanpci: vendor="The XFree86 Project"
>       compiled for 4.2.0, module version = 0.1.0
>       ABI class: XFree86 Video Driver, version 0.5
>(II) UnloadModule: "scanpci"
>(II) Unloading /usr/X11R6/lib/modules/libscanpci.a
>(II) Host-to-PCI bridge:
>(II) PCI-to-ISA bridge:
>(II) PCI-to-PCI bridge:
>(II) Bus 0: bridge is at (0:0:0), (-1,0,0), BCTRL: 0x08 (VGA_EN is set)
>(II) Bus 0 I/O range:
>       [0] -1  0x00000000 - 0x0000ffff (0x10000) IX[B]
>(II) Bus 0 non-prefetchable memory range:
>       [0] -1  0x00000000 - 0xffffffff (0x0) MX[B]
>(II) Bus 0 prefetchable memory range:
>       [0] -1  0x00000000 - 0xffffffff (0x0) MX[B]
>(II) Bus 2: bridge is at (0:30:0), (0,2,2), BCTRL: 0x04 (VGA_EN is cleared)
>(II) Bus 2 I/O range:
>       [0] -1  0x00002000 - 0x000020ff (0x100) IX[B]
>       [1] -1  0x00002400 - 0x000024ff (0x100) IX[B]
>       [2] -1  0x00002800 - 0x000028ff (0x100) IX[B]
>       [3] -1  0x00002c00 - 0x00002cff (0x100) IX[B]
>(II) Bus 2 non-prefetchable memory range:
>       [0] -1  0xe0200000 - 0xe02fffff (0x100000) MX[B]
>(II) Bus 2 prefetchable memory range:
>(II) Bus -1: bridge is at (0:31:0), (0,-1,0), BCTRL: 0x08 (VGA_EN is set)
>(II) Bus -1 I/O range:
>(II) Bus -1 non-prefetchable memory range:
>(II) Bus -1 prefetchable memory range:
>(--) PCI:*(0:2:0) Intel i830M rev 3, Mem @ 0xe8000000/27, 0xe0000000/19
>(--) PCI: (0:2:1) Intel i830M rev 0, Mem @ 0xf0000000/27, 0xe0080000/19
>(II) Addressable bus resource ranges are
>       [0] -1  0x00000000 - 0xffffffff (0x0) MX[B]
>       [1] -1  0x00000000 - 0x0000ffff (0x10000) IX[B]
>(II) OS-reported resource ranges:
>       [0] -1  0xffe00000 - 0xffffffff (0x200000) MX[B](B)
>       [1] -1  0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
>       [2] -1  0x000f0000 - 0x000fffff (0x10000) MX[B]
>       [3] -1  0x000c0000 - 0x000effff (0x30000) MX[B]
>       [4] -1  0x00000000 - 0x0009ffff (0xa0000) MX[B]
>       [5] -1  0x0000ffff - 0x0000ffff (0x1) IX[B]
>       [6] -1  0x00000000 - 0x000000ff (0x100) IX[B]
>(II) Active PCI resource ranges:
>       [0] -1  0xe0200000 - 0xe0200fff (0x1000) MX[B]
>       [1] -1  0xe0100000 - 0xe01003ff (0x400) MX[B]
>       [2] -1  0xe0080000 - 0xe00fffff (0x80000) MX[B](B)
>       [3] -1  0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B)
>       [4] -1  0xe0000000 - 0xe007ffff (0x80000) MX[B](B)
>       [5] -1  0xe8000000 - 0xefffffff (0x8000000) MX[B](B)
>       [6] -1  0x00002400 - 0x0000243f (0x40) IX[B]
>       [7] -1  0x00002000 - 0x000020ff (0x100) IX[B]
>       [8] -1  0x00002440 - 0x0000244f (0x10) IX[B]
>       [9] -1  0x00001880 - 0x0000189f (0x20) IX[B]
>       [10] -1 0x00001860 - 0x0000186f (0x10) IX[B]
>       [11] -1 0x00000374 - 0x00000374 (0x1) IX[B]
>       [12] -1 0x00000170 - 0x00000177 (0x8) IX[B]
>       [13] -1 0x000003f4 - 0x000003f4 (0x1) IX[B]
>       [14] -1 0x000001f0 - 0x000001f7 (0x8) IX[B]
>       [15] -1 0x00001840 - 0x0000185f (0x20) IX[B]
>       [16] -1 0x00001820 - 0x0000183f (0x20) IX[B]
>       [17] -1 0x00001800 - 0x0000181f (0x20) IX[B]
>(II) Active PCI resource ranges after removing overlaps:
>       [0] -1  0xe0200000 - 0xe0200fff (0x1000) MX[B]
>       [1] -1  0xe0100000 - 0xe01003ff (0x400) MX[B]
>       [2] -1  0xe0080000 - 0xe00fffff (0x80000) MX[B](B)
>       [3] -1  0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B)
>       [4] -1  0xe0000000 - 0xe007ffff (0x80000) MX[B](B)
>       [5] -1  0xe8000000 - 0xefffffff (0x8000000) MX[B](B)
>       [6] -1  0x00002400 - 0x0000243f (0x40) IX[B]
>       [7] -1  0x00002000 - 0x000020ff (0x100) IX[B]
>       [8] -1  0x00002440 - 0x0000244f (0x10) IX[B]
>       [9] -1  0x00001880 - 0x0000189f (0x20) IX[B]
>       [10] -1 0x00001860 - 0x0000186f (0x10) IX[B]
>       [11] -1 0x00000374 - 0x00000374 (0x1) IX[B]
>       [12] -1 0x00000170 - 0x00000177 (0x8) IX[B]
>       [13] -1 0x000003f4 - 0x000003f4 (0x1) IX[B]
>       [14] -1 0x000001f0 - 0x000001f7 (0x8) IX[B]
>       [15] -1 0x00001840 - 0x0000185f (0x20) IX[B]
>       [16] -1 0x00001820 - 0x0000183f (0x20) IX[B]
>       [17] -1 0x00001800 - 0x0000181f (0x20) IX[B]
>(II) OS-reported resource ranges after removing overlaps with PCI:
>       [0] -1  0xffe00000 - 0xffffffff (0x200000) MX[B](B)
>       [1] -1  0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
>       [2] -1  0x000f0000 - 0x000fffff (0x10000) MX[B]
>       [3] -1  0x000c0000 - 0x000effff (0x30000) MX[B]
>       [4] -1  0x00000000 - 0x0009ffff (0xa0000) MX[B]
>       [5] -1  0x0000ffff - 0x0000ffff (0x1) IX[B]
>       [6] -1  0x00000000 - 0x000000ff (0x100) IX[B]
>(II) All system resource ranges:
>       [0] -1  0xffe00000 - 0xffffffff (0x200000) MX[B](B)
>       [1] -1  0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
>       [2] -1  0x000f0000 - 0x000fffff (0x10000) MX[B]
>       [3] -1  0x000c0000 - 0x000effff (0x30000) MX[B]
>       [4] -1  0x00000000 - 0x0009ffff (0xa0000) MX[B]
>       [5] -1  0xe0200000 - 0xe0200fff (0x1000) MX[B]
>       [6] -1  0xe0100000 - 0xe01003ff (0x400) MX[B]
>       [7] -1  0xe0080000 - 0xe00fffff (0x80000) MX[B](B)
>       [8] -1  0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B)
>       [9] -1  0xe0000000 - 0xe007ffff (0x80000) MX[B](B)
>       [10] -1 0xe8000000 - 0xefffffff (0x8000000) MX[B](B)
>       [11] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
>       [12] -1 0x00000000 - 0x000000ff (0x100) IX[B]
>       [13] -1 0x00002400 - 0x0000243f (0x40) IX[B]
>       [14] -1 0x00002000 - 0x000020ff (0x100) IX[B]
>       [15] -1 0x00002440 - 0x0000244f (0x10) IX[B]
>       [16] -1 0x00001880 - 0x0000189f (0x20) IX[B]
>       [17] -1 0x00001860 - 0x0000186f (0x10) IX[B]
>       [18] -1 0x00000374 - 0x00000374 (0x1) IX[B]
>       [19] -1 0x00000170 - 0x00000177 (0x8) IX[B]
>       [20] -1 0x000003f4 - 0x000003f4 (0x1) IX[B]
>       [21] -1 0x000001f0 - 0x000001f7 (0x8) IX[B]
>       [22] -1 0x00001840 - 0x0000185f (0x20) IX[B]
>       [23] -1 0x00001820 - 0x0000183f (0x20) IX[B]
>       [24] -1 0x00001800 - 0x0000181f (0x20) IX[B]
>(II) LoadModule: "dbe"
>(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
>(II) Module dbe: vendor="The XFree86 Project"
>       compiled for 4.2.0, module version = 1.0.0
>       Module class: XFree86 Server Extension
>       ABI class: XFree86 Server Extension, version 0.1
>(II) Loading extension DOUBLE-BUFFER
>(II) LoadModule: "v4l"
>(II) Loading /usr/X11R6/lib/modules/drivers/linux/v4l_drv.o
>(II) Module v4l: vendor="The XFree86 Project"
>       compiled for 4.2.0, module version = 0.0.1
>       ABI class: XFree86 Video Driver, version 0.5
>(II) LoadModule: "extmod"
>(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
>(II) Module extmod: vendor="The XFree86 Project"
>       compiled for 4.2.0, module version = 1.0.0
>       Module class: XFree86 Server Extension
>       ABI class: XFree86 Server Extension, version 0.1
>(II) Loading extension SHAPE
>(II) Loading extension MIT-SUNDRY-NONSTANDARD
>(II) Loading extension BIG-REQUESTS
>(II) Loading extension SYNC
>(II) Loading extension MIT-SCREEN-SAVER
>(II) Loading extension XC-MISC
>(II) Loading extension XFree86-VidModeExtension
>(II) Loading extension XFree86-Misc
>(II) Loading extension XFree86-DGA
>(II) Loading extension DPMS
>(II) Loading extension FontCache
>(II) Loading extension TOG-CUP
>(II) Loading extension Extended-Visual-Information
>(II) Loading extension XVideo
>(II) Loading extension XVideo-MotionCompensation
>(II) LoadModule: "type1"
>(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
>(II) Module type1: vendor="The XFree86 Project"
>       compiled for 4.2.0, module version = 1.0.1
>       Module class: XFree86 Font Renderer
>       ABI class: XFree86 Font Renderer, version 0.3
>(II) Loading font Type1
>(II) Loading font CID
>(II) LoadModule: "freetype"
>(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a
>(II) Module freetype: vendor="The XFree86 Project"
>       compiled for 4.2.0, module version = 1.1.10
>       Module class: XFree86 Font Renderer
>       ABI class: XFree86 Font Renderer, version 0.3
>(II) Loading font FreeType
>(II) LoadModule: "i810"
>(II) Loading /usr/X11R6/lib/modules/drivers/i810_drv.o
>(II) Module i810: vendor="The XFree86 Project"
>       compiled for 4.2.0, module version = 1.1.0
>       Module class: XFree86 Video Driver
>       ABI class: XFree86 Video Driver, version 0.5
>(II) LoadModule: "mouse"
>(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
>(II) Module mouse: vendor="The XFree86 Project"
>       compiled for 4.2.0, module version = 1.0.0
>       Module class: XFree86 XInput Driver
>       ABI class: XFree86 XInput driver, version 0.3
>(II) v4l driver for Video4Linux
>(II) I810: Driver for Intel i810 chipset: i810, i810-dc100, i810e, i815,
>       i830M
>(II) Primary Device is: PCI 00:02:0
>(--) Chipset i830M found
>(--) Chipset i830M found
>(II) resource ranges after xf86ClaimFixedResources() call:
>       [0] -1  0xffe00000 - 0xffffffff (0x200000) MX[B](B)
>       [1] -1  0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
>       [2] -1  0x000f0000 - 0x000fffff (0x10000) MX[B]
>       [3] -1  0x000c0000 - 0x000effff (0x30000) MX[B]
>       [4] -1  0x00000000 - 0x0009ffff (0xa0000) MX[B]
>       [5] -1  0xe0200000 - 0xe0200fff (0x1000) MX[B]
>       [6] -1  0xe0100000 - 0xe01003ff (0x400) MX[B]
>       [7] -1  0xe0080000 - 0xe00fffff (0x80000) MX[B](B)
>       [8] -1  0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B)
>       [9] -1  0xe0000000 - 0xe007ffff (0x80000) MX[B](B)
>       [10] -1 0xe8000000 - 0xefffffff (0x8000000) MX[B](B)
>       [11] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
>       [12] -1 0x00000000 - 0x000000ff (0x100) IX[B]
>       [13] -1 0x00002400 - 0x0000243f (0x40) IX[B]
>       [14] -1 0x00002000 - 0x000020ff (0x100) IX[B]
>       [15] -1 0x00002440 - 0x0000244f (0x10) IX[B]
>       [16] -1 0x00001880 - 0x0000189f (0x20) IX[B]
>       [17] -1 0x00001860 - 0x0000186f (0x10) IX[B]
>       [18] -1 0x00000374 - 0x00000374 (0x1) IX[B]
>       [19] -1 0x00000170 - 0x00000177 (0x8) IX[B]
>       [20] -1 0x000003f4 - 0x000003f4 (0x1) IX[B]
>       [21] -1 0x000001f0 - 0x000001f7 (0x8) IX[B]
>       [22] -1 0x00001840 - 0x0000185f (0x20) IX[B]
>       [23] -1 0x00001820 - 0x0000183f (0x20) IX[B]
>       [24] -1 0x00001800 - 0x0000181f (0x20) IX[B]
>(II) resource ranges after xf86ClaimFixedResources() call:
>       [0] -1  0xffe00000 - 0xffffffff (0x200000) MX[B](B)
>       [1] -1  0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
>       [2] -1  0x000f0000 - 0x000fffff (0x10000) MX[B]
>       [3] -1  0x000c0000 - 0x000effff (0x30000) MX[B]
>       [4] -1  0x00000000 - 0x0009ffff (0xa0000) MX[B]
>       [5] -1  0xe0200000 - 0xe0200fff (0x1000) MX[B]
>       [6] -1  0xe0100000 - 0xe01003ff (0x400) MX[B]
>       [7] -1  0xe0080000 - 0xe00fffff (0x80000) MX[B](B)
>       [8] -1  0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B)
>       [9] -1  0xe0000000 - 0xe007ffff (0x80000) MX[B](B)
>       [10] -1 0xe8000000 - 0xefffffff (0x8000000) MX[B](B)
>       [11] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
>       [12] -1 0x00000000 - 0x000000ff (0x100) IX[B]
>       [13] -1 0x00002400 - 0x0000243f (0x40) IX[B]
>       [14] -1 0x00002000 - 0x000020ff (0x100) IX[B]
>       [15] -1 0x00002440 - 0x0000244f (0x10) IX[B]
>       [16] -1 0x00001880 - 0x0000189f (0x20) IX[B]
>       [17] -1 0x00001860 - 0x0000186f (0x10) IX[B]
>       [18] -1 0x00000374 - 0x00000374 (0x1) IX[B]
>       [19] -1 0x00000170 - 0x00000177 (0x8) IX[B]
>       [20] -1 0x000003f4 - 0x000003f4 (0x1) IX[B]
>       [21] -1 0x000001f0 - 0x000001f7 (0x8) IX[B]
>       [22] -1 0x00001840 - 0x0000185f (0x20) IX[B]
>       [23] -1 0x00001820 - 0x0000183f (0x20) IX[B]
>       [24] -1 0x00001800 - 0x0000181f (0x20) IX[B]
>(II) resource ranges after probing:
>       [0] -1  0xffe00000 - 0xffffffff (0x200000) MX[B](B)
>       [1] -1  0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
>       [2] -1  0x000f0000 - 0x000fffff (0x10000) MX[B]
>       [3] -1  0x000c0000 - 0x000effff (0x30000) MX[B]
>       [4] -1  0x00000000 - 0x0009ffff (0xa0000) MX[B]
>       [5] -1  0xe0200000 - 0xe0200fff (0x1000) MX[B]
>       [6] -1  0xe0100000 - 0xe01003ff (0x400) MX[B]
>       [7] -1  0xe0080000 - 0xe00fffff (0x80000) MX[B](B)
>       [8] -1  0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B)
>       [9] -1  0xe0000000 - 0xe007ffff (0x80000) MX[B](B)
>       [10] -1 0xe8000000 - 0xefffffff (0x8000000) MX[B](B)
>       [11] 0  0x000a0000 - 0x000affff (0x10000) MS[B]
>       [12] 0  0x000b0000 - 0x000b7fff (0x8000) MS[B]
>       [13] 0  0x000b8000 - 0x000bffff (0x8000) MS[B]
>       [14] 1  0x000a0000 - 0x000affff (0x10000) MS[B]
>       [15] 1  0x000b0000 - 0x000b7fff (0x8000) MS[B]
>       [16] 1  0x000b8000 - 0x000bffff (0x8000) MS[B]
>       [17] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
>       [18] -1 0x00000000 - 0x000000ff (0x100) IX[B]
>       [19] -1 0x00002400 - 0x0000243f (0x40) IX[B]
>       [20] -1 0x00002000 - 0x000020ff (0x100) IX[B]
>       [21] -1 0x00002440 - 0x0000244f (0x10) IX[B]
>       [22] -1 0x00001880 - 0x0000189f (0x20) IX[B]
>       [23] -1 0x00001860 - 0x0000186f (0x10) IX[B]
>       [24] -1 0x00000374 - 0x00000374 (0x1) IX[B]
>       [25] -1 0x00000170 - 0x00000177 (0x8) IX[B]
>       [26] -1 0x000003f4 - 0x000003f4 (0x1) IX[B]
>       [27] -1 0x000001f0 - 0x000001f7 (0x8) IX[B]
>       [28] -1 0x00001840 - 0x0000185f (0x20) IX[B]
>       [29] -1 0x00001820 - 0x0000183f (0x20) IX[B]
>       [30] -1 0x00001800 - 0x0000181f (0x20) IX[B]
>       [31] 0  0x000003b0 - 0x000003bb (0xc) IS[B]
>       [32] 0  0x000003c0 - 0x000003df (0x20) IS[B]
>       [33] 1  0x000003b0 - 0x000003bb (0xc) IS[B]
>       [34] 1  0x000003c0 - 0x000003df (0x20) IS[B]
>(II) Setting vga for screen 0.
>(II) Setting vga for screen 1.
>(II) Loading sub module "vgahw"
>(II) LoadModule: "vgahw"
>(II) Loading /usr/X11R6/lib/modules/libvgahw.a
>(II) Module vgahw: vendor="The XFree86 Project"
>       compiled for 4.2.0, module version = 0.1.0
>       ABI class: XFree86 Video Driver, version 0.5
>(II) Loading sub module "int10"
>(II) LoadModule: "int10"
>(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
>(II) Module int10: vendor="The XFree86 Project"
>       compiled for 4.2.0, module version = 1.0.0
>       ABI class: XFree86 Video Driver, version 0.5
>(**) I810(0): Depth 16, (--) framebuffer bpp 16
>(==) I810(0): RGB weight 565
>(==) I810(0): Default visual is TrueColor
>(WW) I810(0): Bad V_BIOS checksum
>(II) I810(0): Primary V_BIOS segment is: 0xc000
>(--) I810(0): Chipset: "i830"
>(--) I810(0): Linear framebuffer at 0xE8000000
>(--) I810(0): IO registers at addr 0xE0000000
>(II) I810(0): detected 8192K stolen memory.
>(II) I810(0): I810CheckAvailableMemory: 441340k available
>(==) I810(0): Will alloc AGP framebuffer: 8192 kByte
>(==) I810(0): Using gamma correction (1.0, 1.0, 1.0)
>(II) I810(0): Currently active displays on Pipe A:
>(II) I810(0):     LFP (Local Flat Panel) child device
>(II) Loading sub module "vbe"
>(II) LoadModule: "vbe"
>(II) Loading /usr/X11R6/lib/modules/libvbe.a
>(II) Module vbe: vendor="The XFree86 Project"
>       compiled for 4.2.0, module version = 1.0.0
>       ABI class: XFree86 Video Driver, version 0.5
>(II) I810(1): VESA BIOS detected
>(II) I810(1): VESA VBE Version 3.0
>(II) I810(1): VESA VBE Total Mem: 8000 kB
>(II) I810(1): VESA VBE OEM: Almador Graphics Chip Accelerated VGA BIOS
>(II) I810(1): VESA VBE OEM Software Rev: 1.0
>(II) I810(1): VESA VBE OEM Vendor: Intel Corporation
>(II) I810(1): VESA VBE OEM Product: Almador Graphics Controller
>(II) I810(1): VESA VBE OEM Product Rev: Hardware Version 0.0
>(II) Loading sub module "ddc"
>(II) LoadModule: "ddc"
>(II) Loading /usr/X11R6/lib/modules/libddc.a
>(II) Module ddc: vendor="The XFree86 Project"
>       compiled for 4.2.0, module version = 1.0.0
>       ABI class: XFree86 Video Driver, version 0.5
>(II) I810(0): VESA VBE DDC supported
>(II) I810(0): VESA VBE DDC Level none
>(II) I810(0): VESA VBE DDC transfer in appr. 0 sec.
>(II) I810(0): VESA VBE DDC read failed
>(==) I810(0): DPI set to (75, 75)
>(--) I810(0): Virtual size is 1280x1024 (pitch 1280)
>(**) I810(0): Default mode "1280x1024"
>(**) I810(0): Default mode "1024x768"
>(**) I810(0): Default mode "800x600"
>(**) I810(0): Default mode "640x480"
>(II) Loading sub module "fb"
>(II) LoadModule: "fb"
>(II) Loading /usr/X11R6/lib/modules/libfb.a
>(II) Module fb: vendor="The XFree86 Project"
>       compiled for 4.2.0, module version = 1.0.0
>       ABI class: XFree86 ANSI C Emulation, version 0.1
>(II) Loading sub module "xaa"
>(II) LoadModule: "xaa"
>(II) Loading /usr/X11R6/lib/modules/libxaa.a
>(II) Module xaa: vendor="The XFree86 Project"
>       compiled for 4.2.0, module version = 1.0.0
>       ABI class: XFree86 Video Driver, version 0.5
>(II) Loading sub module "ramdac"
>(II) LoadModule: "ramdac"
>(II) Loading /usr/X11R6/lib/modules/libramdac.a
>(II) Module ramdac: vendor="The XFree86 Project"
>       compiled for 4.2.0, module version = 0.1.0
>       ABI class: XFree86 Video Driver, version 0.5
>(II) Loading sub module "vgahw"
>(II) LoadModule: "vgahw"
>(II) Reloading /usr/X11R6/lib/modules/libvgahw.a
>(II) Loading sub module "int10"
>(II) LoadModule: "int10"
>(II) Reloading /usr/X11R6/lib/modules/linux/libint10.a
>(**) I810(1): Depth 16, (--) framebuffer bpp 16
>(==) I810(1): RGB weight 565
>(==) I810(1): Default visual is TrueColor
>(EE) I810(1): Cannot read V_BIOS
>(EE) I810(1): Int10 initialization failed.
>(II) UnloadModule: "i810"
>(II) UnloadModule: "int10"
>(II) UnloadModule: "vgahw"
>(II) do I need RAC?  No, I don't.
>(II) resource ranges after preInit:
>       [0] 1   0xe0080000 - 0xe00fffff (0x80000) MS[B]
>       [1] 1   0xf0000000 - 0xf7ffffff (0x8000000) MS[B]
>       [2] -1  0xffe00000 - 0xffffffff (0x200000) MX[B](B)
>       [3] -1  0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
>       [4] -1  0x000f0000 - 0x000fffff (0x10000) MX[B]
>       [5] -1  0x000c0000 - 0x000effff (0x30000) MX[B]
>       [6] -1  0x00000000 - 0x0009ffff (0xa0000) MX[B]
>       [7] -1  0xe0200000 - 0xe0200fff (0x1000) MX[B]
>       [8] -1  0xe0100000 - 0xe01003ff (0x400) MX[B]
>       [9] -1  0xe0080000 - 0xe00fffff (0x80000) MX[B](B)
>       [10] -1 0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B)
>       [11] -1 0xe0000000 - 0xe007ffff (0x80000) MX[B](B)
>       [12] -1 0xe8000000 - 0xefffffff (0x8000000) MX[B](B)
>       [13] 1  0x000a0000 - 0x000affff (0x10000) MS[B]
>       [14] 1  0x000b0000 - 0x000b7fff (0x8000) MS[B]
>       [15] 1  0x000b8000 - 0x000bffff (0x8000) MS[B]
>       [16] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
>       [17] -1 0x00000000 - 0x000000ff (0x100) IX[B]
>       [18] -1 0x00002400 - 0x0000243f (0x40) IX[B]
>       [19] -1 0x00002000 - 0x000020ff (0x100) IX[B]
>       [20] -1 0x00002440 - 0x0000244f (0x10) IX[B]
>       [21] -1 0x00001880 - 0x0000189f (0x20) IX[B]
>       [22] -1 0x00001860 - 0x0000186f (0x10) IX[B]
>       [23] -1 0x00000374 - 0x00000374 (0x1) IX[B]
>       [24] -1 0x00000170 - 0x00000177 (0x8) IX[B]
>       [25] -1 0x000003f4 - 0x000003f4 (0x1) IX[B]
>       [26] -1 0x000001f0 - 0x000001f7 (0x8) IX[B]
>       [27] -1 0x00001840 - 0x0000185f (0x20) IX[B]
>       [28] -1 0x00001820 - 0x0000183f (0x20) IX[B]
>       [29] -1 0x00001800 - 0x0000181f (0x20) IX[B]
>       [30] 1  0x000003b0 - 0x000003bb (0xc) IS[B]
>       [31] 1  0x000003c0 - 0x000003df (0x20) IS[B]
>(==) I810(0): Default visual is TrueColor
>(==) I810(0): Write-combining range (0xe8000000,0x8000000)
>(II) I810(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
>(II) I810(0): Adding 384 scanlines for pixmap caching
>(II) I810(0): Allocated Scratch Memory
>(II) I810(0): Using XFree86 Acceleration Architecture (XAA)
>       Screen to screen bit blits
>       Solid filled rectangles
>       8x8 mono pattern filled rectangles
>       Indirect CPU to Screen color expansion
>       Solid Horizontal and Vertical Lines
>       Offscreen Pixmaps
>       Setting up tile and stipple cache:
>               30 128x128 slots
>(==) I810(0): Backing store disabled
>(==) I810(0): Silken mouse enabled
>(II) I810(0): Initializing HW Cursor
>(**) Option "dpms" "on"
>(**) I810(0): DPMS enabled
>(II) I810(0): direct rendering: Disabled
>(II) Initializing built-in extension MIT-SHM
>(II) Initializing built-in extension XInputExtension
>(II) Initializing built-in extension XTEST
>(II) Initializing built-in extension XKEYBOARD
>(II) Initializing built-in extension LBX
>(II) Initializing built-in extension XC-APPGROUP
>(II) Initializing built-in extension SECURITY
>(II) Initializing built-in extension XINERAMA
>(II) Initializing built-in extension XFree86-Bigfont
>(II) Initializing built-in extension RENDER
>(**) Option "Protocol" "PS/2"
>(**) Mouse1: Protocol: "PS/2"
>(**) Option "CorePointer"
>(**) Mouse1: Core Pointer
>(**) Option "Device" "/dev/mouse"
>(**) Option "Emulate3Buttons"
>(**) Option "Emulate3Timeout" "50"
>(**) Mouse1: Emulate3Buttons, Emulate3Timeout: 50
>(==) Mouse1: Buttons: 3
>(II) Keyboard "Keyboard1" handled by legacy driver
>(II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)
>
>_______________________________________________
>Xpert mailing list
>[EMAIL PROTECTED]
>http://XFree86.Org/mailman/listinfo/xpert
>
_______________________________________________
Xpert mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xpert

Reply via email to