On Thursday 04 April 2002 10:00 am, you wrote: > The ct65550 does have a very low pixel clock limit. > It's possible to exceed this limit using hand selected > clock values - but we don't do this in the driver. > > You need to make your own modeline for 800x600 using > a pixel clock not exceeding the 35 MHz. > You can use > 35.00 800 840 968 1056 600 601 605 628 > which is the 60Hz modeline with a lower pixel clock.
Yes! yes! YES!!! It works! Thank you! If I change the numbers to your modelines, X told me that my vertical refresh rate was just a bit too high. Needed to be 52.something. So I decreased the lower limit by 5 and now it works. Frank -- homepage: www.student.kuleuven.ac.be/~m9917684 jabber (=IM): [EMAIL PROTECTED] No part of this copyright message may be reproduced, read or seen, dead or alive or by any means, including but not limited to telepathy without the benevolence of the author. _______________________________________________ Xpert mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xpert
