Hi there!
I'm sending you both this message with hopes that someone could help,
or point me in the correct direction.
I'm running mandrake 8.2, kernel 2.4.18, on a Dell 8100. The problem I'm
having is 'totally black' screens when X starts. I've reviewed all of the
logs, and I don't see anything that seems to be an error... and I've
hunted the net for info. I found one thread here:
http://www.xfree86.org/pipermail/xpert/2001-December/014212.html
... to talk about this chip under Xfree86... but that's about it.
The card is a ATI Technologies Inc Radeon Mobility M6 LW, with 64 megs of
ram.
I've attached dmesg output, XFconfig, xfree.log, and lspci -vv output.
I'm not sure what mailinglist I should post this to; is the Xpert list
the place?
TIA,
Eric Johanson
PS. If for whatever reason the archives or the mailserv doesn't keep the
attachments, I've mirrored them here: http://www.vilos.com/radeon_lw
XFree86 Version 4.2.0 / X Window System
(protocol Version 11, revision 0, vendor release 6600)
Release Date: 23 January 2002
If the server is older than 6-12 months, or if your card is
newer than the above date, look for a newer version before
reporting problems. (See http://www.XFree86.Org/)
Build Operating System: Linux 2.4.18-1mdksmp i686 [ELF]
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Wed Apr 10 19:01:16 2002
(==) Using config file: "/etc/X11/XF86Config-4"
(==) ServerLayout "layout1"
(**) |-->Screen "screen1" (0)
(**) | |-->Monitor "Generic|Monitor that can do 1600x1200 at 70 Hz"
(**) | |-->Device "ATI Radeon"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(**) Option "AutoRepeat" "250 30"
(**) Option "XkbRules" "xfree86"
(**) XKB: rules: "xfree86"
(**) Option "XkbModel" "pc105"
(**) XKB: model: "pc105"
(**) Option "XkbLayout" "us"
(**) XKB: layout: "us"
(==) Keyboard: CustomKeycode disabled
(**) FontPath set to "unix/:-1"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(**) Option "AllowMouseOpenFail"
(--) using VT number 7
(II) Open APM successful
(II) Module ABI versions:
XFree86 ANSI C Emulation: 0.1
XFree86 Video Driver: 0.5
XFree86 XInput driver : 0.3
XFree86 Server Extension : 0.1
XFree86 Font Renderer : 0.3
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.3
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.5
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x80027a48, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,1130 card 0000,0000 rev 04 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 8086,1131 card 0000,0000 rev 04 class 06,04,00 hdr 01
(II) PCI: 00:1e:0: chip 8086,2448 card 0000,0000 rev 03 class 06,04,00 hdr 01
(II) PCI: 00:1f:0: chip 8086,244c card 0000,0000 rev 03 class 06,01,00 hdr 80
(II) PCI: 00:1f:1: chip 8086,244a card 8086,4541 rev 03 class 01,01,80 hdr 00
(II) PCI: 00:1f:2: chip 8086,2442 card 8086,4541 rev 03 class 0c,03,00 hdr 00
(II) PCI: 01:00:0: chip 1002,4c57 card 1028,00e6 rev 00 class 03,00,00 hdr 00
(II) PCI: 02:03:0: chip 125d,1998 card 1028,00e6 rev 10 class 04,01,00 hdr 00
(II) PCI: 02:06:0: chip 10b7,6055 card 10b7,6456 rev 10 class 02,00,00 hdr 80
(II) PCI: 02:06:1: chip 10b7,1007 card 10b7,615b rev 10 class 07,80,00 hdr 00
(II) PCI: 02:0f:0: chip 104c,ac42 card e000,0000 rev 00 class 06,07,00 hdr 82
(II) PCI: 02:0f:1: chip 104c,ac42 card f400,0000 rev 00 class 06,07,00 hdr 82
(II) PCI: 02:0f:2: chip 104c,8027 card 1028,00e6 rev 00 class 0c,00,10 hdr 80
(II) PCI: End of PCI scan
(II) LoadModule: "scanpci"
(II) Loading /usr/X11R6/lib/modules/libscanpci.a
(II) Module scanpci: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.5
(II) UnloadModule: "scanpci"
(II) Unloading /usr/X11R6/lib/modules/libscanpci.a
(II) Host-to-PCI bridge:
(II) PCI-to-ISA bridge:
(II) PCI-to-PCI bridge:
(II) PCI-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (-1,0,0), BCTRL: 0x08 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x0c (VGA_EN is set)
(II) Bus 1 I/O range:
[0] -1 0x0000c000 - 0x0000c0ff (0x100) IX[B]
[1] -1 0x0000c400 - 0x0000c4ff (0x100) IX[B]
[2] -1 0x0000c800 - 0x0000c8ff (0x100) IX[B]
[3] -1 0x0000cc00 - 0x0000ccff (0x100) IX[B]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0xfc000000 - 0xfdffffff (0x2000000) MX[B]
(II) Bus 1 prefetchable memory range:
[0] -1 0xe0000000 - 0xe7ffffff (0x8000000) MX[B]
(II) Bus 2: bridge is at (0:30:0), (0,2,16), BCTRL: 0x06 (VGA_EN is cleared)
(II) Bus 2 I/O range:
[0] -1 0x0000e000 - 0x0000e0ff (0x100) IX[B]
[1] -1 0x0000e400 - 0x0000e4ff (0x100) IX[B]
[2] -1 0x0000e800 - 0x0000e8ff (0x100) IX[B]
[3] -1 0x0000ec00 - 0x0000ecff (0x100) IX[B]
[4] -1 0x0000f000 - 0x0000f0ff (0x100) IX[B]
[5] -1 0x0000f400 - 0x0000f4ff (0x100) IX[B]
[6] -1 0x0000f800 - 0x0000f8ff (0x100) IX[B]
[7] -1 0x0000fc00 - 0x0000fcff (0x100) IX[B]
(II) Bus 2 non-prefetchable memory range:
[0] -1 0xf4000000 - 0xfbffffff (0x8000000) MX[B]
(II) Bus 2 prefetchable memory range:
(II) Bus -1: bridge is at (0:31:0), (0,-1,0), BCTRL: 0x08 (VGA_EN is set)
(II) Bus -1 I/O range:
(II) Bus -1 non-prefetchable memory range:
(II) Bus -1 prefetchable memory range:
(--) PCI:*(1:0:0) ATI Radeon Mobility M7 LW rev 0, Mem @ 0xe0000000/27, 0xfcff0000/16,
I/O @ 0xcc00/8, BIOS @ 0x80000000/17
(II) Addressable bus resource ranges are
[0] -1 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0x00000000 - 0x000000ff (0x100) IX[B]
(II) Active PCI resource ranges:
[0] -1 0xf8ff8000 - 0xf8ffbfff (0x4000) MX[B]
[1] -1 0xf8ffc800 - 0xf8ffcfff (0x800) MX[B]
[2] -1 0xf8ffd000 - 0xf8ffd07f (0x80) MX[B]
[3] -1 0xf8ffd400 - 0xf8ffd4ff (0x100) MX[B]
[4] -1 0xf8ffd800 - 0xf8ffd87f (0x80) MX[B]
[5] -1 0xf8ffdc00 - 0xf8ffdc7f (0x80) MX[B]
[6] -1 0xf8ffe000 - 0xf8ffffff (0x2000) MX[B]
[7] -1 0xe8000000 - 0xebffffff (0x4000000) MX[B]
[8] -1 0x80000000 - 0x8001ffff (0x20000) MX[B](B)
[9] -1 0xfcff0000 - 0xfcffffff (0x10000) MX[B](B)
[10] -1 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B)
[11] -1 0x0000e400 - 0x0000e4ff (0x100) IX[B]
[12] -1 0x0000e800 - 0x0000e8ff (0x100) IX[B]
[13] -1 0x0000ec00 - 0x0000ecff (0x100) IX[B]
[14] -1 0x0000dce0 - 0x0000dcff (0x20) IX[B]
[15] -1 0x0000bfa0 - 0x0000bfaf (0x10) IX[B]
[16] -1 0x0000cc00 - 0x0000ccff (0x100) IX[B](B)
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0xf8ff8000 - 0xf8ffbfff (0x4000) MX[B]
[1] -1 0xf8ffc800 - 0xf8ffcfff (0x800) MX[B]
[2] -1 0xf8ffd000 - 0xf8ffd07f (0x80) MX[B]
[3] -1 0xf8ffd400 - 0xf8ffd4ff (0x100) MX[B]
[4] -1 0xf8ffd800 - 0xf8ffd87f (0x80) MX[B]
[5] -1 0xf8ffdc00 - 0xf8ffdc7f (0x80) MX[B]
[6] -1 0xf8ffe000 - 0xf8ffffff (0x2000) MX[B]
[7] -1 0xe8000000 - 0xebffffff (0x4000000) MX[B]
[8] -1 0x80000000 - 0x8001ffff (0x20000) MX[B](B)
[9] -1 0xfcff0000 - 0xfcffffff (0x10000) MX[B](B)
[10] -1 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B)
[11] -1 0x0000e400 - 0x0000e4ff (0x100) IX[B]
[12] -1 0x0000e800 - 0x0000e8ff (0x100) IX[B]
[13] -1 0x0000ec00 - 0x0000ecff (0x100) IX[B]
[14] -1 0x0000dce0 - 0x0000dcff (0x20) IX[B]
[15] -1 0x0000bfa0 - 0x0000bfaf (0x10) IX[B]
[16] -1 0x0000cc00 - 0x0000ccff (0x100) IX[B](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0xf8ff8000 - 0xf8ffbfff (0x4000) MX[B]
[6] -1 0xf8ffc800 - 0xf8ffcfff (0x800) MX[B]
[7] -1 0xf8ffd000 - 0xf8ffd07f (0x80) MX[B]
[8] -1 0xf8ffd400 - 0xf8ffd4ff (0x100) MX[B]
[9] -1 0xf8ffd800 - 0xf8ffd87f (0x80) MX[B]
[10] -1 0xf8ffdc00 - 0xf8ffdc7f (0x80) MX[B]
[11] -1 0xf8ffe000 - 0xf8ffffff (0x2000) MX[B]
[12] -1 0xe8000000 - 0xebffffff (0x4000000) MX[B]
[13] -1 0x80000000 - 0x8001ffff (0x20000) MX[B](B)
[14] -1 0xfcff0000 - 0xfcffffff (0x10000) MX[B](B)
[15] -1 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B)
[16] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[17] -1 0x00000000 - 0x000000ff (0x100) IX[B]
[18] -1 0x0000e400 - 0x0000e4ff (0x100) IX[B]
[19] -1 0x0000e800 - 0x0000e8ff (0x100) IX[B]
[20] -1 0x0000ec00 - 0x0000ecff (0x100) IX[B]
[21] -1 0x0000dce0 - 0x0000dcff (0x20) IX[B]
[22] -1 0x0000bfa0 - 0x0000bfaf (0x10) IX[B]
[23] -1 0x0000cc00 - 0x0000ccff (0x100) IX[B](B)
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "v4l"
(II) Loading /usr/X11R6/lib/modules/drivers/linux/v4l_drv.o
(II) Module v4l: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 0.0.1
ABI class: XFree86 Video Driver, version 0.5
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
(II) Module glx: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.1
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Module GLcore: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/X11R6/lib/modules/extensions/libdri.a
(II) Module dri: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.1
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/X11R6/lib/modules/linux/libdrm.a
(II) Module drm: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension XFree86-DRI
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.1
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.3
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a
(II) Module freetype: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.1.10
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.3
(II) Loading font FreeType
(II) LoadModule: "radeon"
(II) Loading /usr/X11R6/lib/modules/drivers/radeon_drv.o
(II) Module radeon: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 4.0.1
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.5
(II) LoadModule: "ati"
(II) Loading /usr/X11R6/lib/modules/drivers/ati_drv.o
(II) Module ati: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 6.4.7
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.5
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
Module class: XFree86 XInput Driver
ABI class: XFree86 XInput driver, version 0.3
(II) v4l driver for Video4Linux
(II) ATI: ATI driver (version 6.4.7) for chipsets: ati, ativga
(II) R128: Driver for ATI Rage 128 chipsets: ATI Rage 128 RE (PCI),
ATI Rage 128 RF (AGP), ATI Rage 128 RG (AGP), ATI Rage 128 RK (PCI),
ATI Rage 128 RL (AGP), ATI Rage 128 SM (AGP),
ATI Rage 128 Pro PD (PCI), ATI Rage 128 Pro PF (AGP),
ATI Rage 128 Pro PP (PCI), ATI Rage 128 Pro PR (PCI),
ATI Rage 128 Pro ULTRA TF (AGP), ATI Rage 128 Pro ULTRA TL (AGP),
ATI Rage 128 Pro ULTRA TR (AGP), ATI Rage 128 Mobility LE (PCI),
ATI Rage 128 Mobility LF (AGP), ATI Rage 128 Mobility MF (AGP),
ATI Rage 128 Mobility ML (AGP)
(II) RADEON: Driver for ATI Radeon chipsets: ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI Radeon VE QY (AGP), ATI Radeon VE QZ (AGP),
ATI Radeon Mobility LW (AGP), ATI Radeon Mobility LY (AGP),
ATI Radeon Mobility LZ (AGP), ATI Radeon 8500 QL (AGP),
ATI Radeon 8500 BB (AGP), ATI Radeon 7500 QW (AGP)
(II) Primary Device is: PCI 01:00:0
(--) Assigning device section with no busID to primary device
(--) Chipset ATI Radeon Mobility LW (AGP) found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0xf8ff8000 - 0xf8ffbfff (0x4000) MX[B]
[6] -1 0xf8ffc800 - 0xf8ffcfff (0x800) MX[B]
[7] -1 0xf8ffd000 - 0xf8ffd07f (0x80) MX[B]
[8] -1 0xf8ffd400 - 0xf8ffd4ff (0x100) MX[B]
[9] -1 0xf8ffd800 - 0xf8ffd87f (0x80) MX[B]
[10] -1 0xf8ffdc00 - 0xf8ffdc7f (0x80) MX[B]
[11] -1 0xf8ffe000 - 0xf8ffffff (0x2000) MX[B]
[12] -1 0xe8000000 - 0xebffffff (0x4000000) MX[B]
[13] -1 0x80000000 - 0x8001ffff (0x20000) MX[B](B)
[14] -1 0xfcff0000 - 0xfcffffff (0x10000) MX[B](B)
[15] -1 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B)
[16] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[17] -1 0x00000000 - 0x000000ff (0x100) IX[B]
[18] -1 0x0000e400 - 0x0000e4ff (0x100) IX[B]
[19] -1 0x0000e800 - 0x0000e8ff (0x100) IX[B]
[20] -1 0x0000ec00 - 0x0000ecff (0x100) IX[B]
[21] -1 0x0000dce0 - 0x0000dcff (0x20) IX[B]
[22] -1 0x0000bfa0 - 0x0000bfaf (0x10) IX[B]
[23] -1 0x0000cc00 - 0x0000ccff (0x100) IX[B](B)
(II) Loading sub module "radeon"
(II) LoadModule: "radeon"
(II) Reloading /usr/X11R6/lib/modules/drivers/radeon_drv.o
(II) resource ranges after probing:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0xf8ff8000 - 0xf8ffbfff (0x4000) MX[B]
[6] -1 0xf8ffc800 - 0xf8ffcfff (0x800) MX[B]
[7] -1 0xf8ffd000 - 0xf8ffd07f (0x80) MX[B]
[8] -1 0xf8ffd400 - 0xf8ffd4ff (0x100) MX[B]
[9] -1 0xf8ffd800 - 0xf8ffd87f (0x80) MX[B]
[10] -1 0xf8ffdc00 - 0xf8ffdc7f (0x80) MX[B]
[11] -1 0xf8ffe000 - 0xf8ffffff (0x2000) MX[B]
[12] -1 0xe8000000 - 0xebffffff (0x4000000) MX[B]
[13] -1 0x80000000 - 0x8001ffff (0x20000) MX[B](B)
[14] -1 0xfcff0000 - 0xfcffffff (0x10000) MX[B](B)
[15] -1 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B)
[16] 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[17] 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[18] 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[19] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[20] -1 0x00000000 - 0x000000ff (0x100) IX[B]
[21] -1 0x0000e400 - 0x0000e4ff (0x100) IX[B]
[22] -1 0x0000e800 - 0x0000e8ff (0x100) IX[B]
[23] -1 0x0000ec00 - 0x0000ecff (0x100) IX[B]
[24] -1 0x0000dce0 - 0x0000dcff (0x20) IX[B]
[25] -1 0x0000bfa0 - 0x0000bfaf (0x10) IX[B]
[26] -1 0x0000cc00 - 0x0000ccff (0x100) IX[B](B)
[27] 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[28] 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.5
(II) RADEON(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) RADEON(0): PCI bus 1 card 0 func 0
(**) RADEON(0): Depth 16, (--) framebuffer bpp 16
(II) RADEON(0): Pixel depth = 16 bits stored in 2 bytes (16 bpp pixmaps)
(==) RADEON(0): Default visual is TrueColor
(**) RADEON(0): Option "AGPMode" "1"
(==) RADEON(0): RGB weight 565
(II) RADEON(0): Using 6 bits per RGB (8 bit DAC)
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.5
(II) RADEON(0): initializing int10
(II) RADEON(0): Primary V_BIOS segment is: 0xc000
(--) RADEON(0): Chipset: "ATI Radeon Mobility LW (AGP)" (ChipID = 0x4c57)
(--) RADEON(0): Linear framebuffer at 0xe0000000
(--) RADEON(0): MMIO registers at 0xfcff0000
(--) RADEON(0): BIOS at 0x80000000
(--) RADEON(0): VideoRAM: 65536 kByte (64-bit DDR SDRAM)
(II) RADEON(0): Primary Display == Type 2
(II) RADEON(0): Panel ID string: SHP
(II) RADEON(0): Panel Size from BIOS: 1600x1200
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.5
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Loading /usr/X11R6/lib/modules/libi2c.a
(II) Module i2c: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.2.0
ABI class: XFree86 Video Driver, version 0.5
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/X11R6/lib/modules/libvbe.a
(II) Module vbe: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.5
(II) RADEON(0): VESA BIOS detected
(II) RADEON(0): VESA VBE Version 2.0
(II) RADEON(0): VESA VBE Total Mem: 65536 kB
(II) RADEON(0): VESA VBE OEM: ATI MOBILITY RADEON 7500
(II) RADEON(0): VESA VBE OEM Software Rev: 1.0
(II) RADEON(0): VESA VBE OEM Vendor: ATI Technologies Inc.
(II) RADEON(0): VESA VBE OEM Product: P7
(II) RADEON(0): VESA VBE OEM Product Rev: 01.00
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Reloading /usr/X11R6/lib/modules/libddc.a
(II) RADEON(0): VESA VBE DDC supported
(II) RADEON(0): VESA VBE DDC Level 2
(II) RADEON(0): VESA VBE DDC transfer in appr. 2 sec.
(II) RADEON(0): VESA VBE DDC read successfully
(II) RADEON(0): BIOS EDID Info:
(II) RADEON(0): Manufacturer: SHP Model: 138a Serial#: 0
(II) RADEON(0): Year: 1990 Week: 0
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Digital Display Input
(II) RADEON(0): Max H-Image Size [cm]: horiz.: 30 vert.: 23
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): DPMS capabilities: StandBy Suspend; RGB/Color Display
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.604 redY: 0.318 greenX: 0.296 greenY: 0.570
(II) RADEON(0): blueX: 0.138 blueY: 0.134 whiteX: 0.312 whiteY: 0.328
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported Future Video Modes:
(II) RADEON(0): #0: hsize: 1600 vsize 1200 refresh: 60 vid: 16553
(II) RADEON(0): Supported additional Video Mode:
(II) RADEON(0): clock: 160.0 MHz Image Size: 304 x 228 mm
(II) RADEON(0): h_active: 1600 h_sync: 1664 h_sync_end 1856 h_blank_end 2112
h_border: 0
(II) RADEON(0): v_active: 1200 v_sync: 1201 v_sync_end 1204 v_blanking: 1250
v_border: 0
(II) RADEON(0): End of DDC Monitor info
(II) RADEON(0): PLL parameters: rf=2700 rd=12 min=12000 max=40000; xclk=18300
(==) RADEON(0): Using gamma correction (1.0, 1.0, 1.0)
(--) RADEON(0): Virtual size is 640x480 (pitch 672)
(**) RADEON(0): Mode "640x480"
(--) RADEON(0): Display dimensions: (300, 230) mm
(--) RADEON(0): DPI set to (54, 53)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
ABI class: XFree86 ANSI C Emulation, version 0.1
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.5
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.5
(**) RADEON(0): Using AGP 1x mode
(II) RADEON(0): Depth moves disabled by default
(!!) RADEON(0): For information on using the multimedia capabilities
of this adapter, please see http://gatos.sf.net.
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0xfcff0000 - 0xfcffffff (0x10000) MX[B]
[1] 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B]
[2] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[3] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[4] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[5] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[6] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[7] -1 0xf8ff8000 - 0xf8ffbfff (0x4000) MX[B]
[8] -1 0xf8ffc800 - 0xf8ffcfff (0x800) MX[B]
[9] -1 0xf8ffd000 - 0xf8ffd07f (0x80) MX[B]
[10] -1 0xf8ffd400 - 0xf8ffd4ff (0x100) MX[B]
[11] -1 0xf8ffd800 - 0xf8ffd87f (0x80) MX[B]
[12] -1 0xf8ffdc00 - 0xf8ffdc7f (0x80) MX[B]
[13] -1 0xf8ffe000 - 0xf8ffffff (0x2000) MX[B]
[14] -1 0xe8000000 - 0xebffffff (0x4000000) MX[B]
[15] -1 0x80000000 - 0x8001ffff (0x20000) MX[B](B)
[16] -1 0xfcff0000 - 0xfcffffff (0x10000) MX[B](B)
[17] -1 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B)
[18] 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[19] 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[20] 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[21] 0 0x0000cc00 - 0x0000ccff (0x100) IX[B]
[22] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[23] -1 0x00000000 - 0x000000ff (0x100) IX[B]
[24] -1 0x0000e400 - 0x0000e4ff (0x100) IX[B]
[25] -1 0x0000e800 - 0x0000e8ff (0x100) IX[B]
[26] -1 0x0000ec00 - 0x0000ecff (0x100) IX[B]
[27] -1 0x0000dce0 - 0x0000dcff (0x20) IX[B]
[28] -1 0x0000bfa0 - 0x0000bfaf (0x10) IX[B]
[29] -1 0x0000cc00 - 0x0000ccff (0x100) IX[B](B)
[30] 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[31] 0 0x000003c0 - 0x000003df (0x20) IS[B]
(==) RADEON(0): Write-combining range (0xe0000000,0x4000000)
(II) RADEON(0): membase=0xe0000000 memsize=0x04000000 agpSize=0x00000008
drmOpenDevice: minor is 0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: minor is 0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: minor is 0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmGetBusid returned ''
(II) RADEON(0): [drm] loaded kernel module for "radeon" driver
(II) RADEON(0): [drm] created "radeon" driver at busid "PCI:1:0:0"
(II) RADEON(0): [drm] added 8192 byte SAREA at 0xe0984000
(II) RADEON(0): [drm] mapped SAREA 0xe0984000 to 0x40016000
(II) RADEON(0): [drm] framebuffer handle = 0xe0000000
(II) RADEON(0): [drm] added 1 reserved context for kernel
(II) RADEON(0): [agp] Mode 0x1f000201 [AGP 0x8086/0x1130; Card 0x1002/0x4c57]
(II) RADEON(0): [agp] 8192 kB allocated with handle 0xe4988000
(II) RADEON(0): [agp] ring handle = 0xe8000000
(II) RADEON(0): [agp] Ring mapped at 0x44249000
(II) RADEON(0): [agp] ring read ptr handle = 0xe8101000
(II) RADEON(0): [agp] Ring read ptr mapped at 0x40018000
(II) RADEON(0): [agp] vertex/indirect buffers handle = 0xe8102000
(II) RADEON(0): [agp] Vertex/indirect buffers mapped at 0x4434a000
(II) RADEON(0): [agp] AGP texture map handle = 0xe8302000
(II) RADEON(0): [agp] AGP Texture map mapped at 0x4454a000
(II) RADEON(0): [drm] register handle = 0xfcff0000
(II) RADEON(0): [dri] Visual configs initialized
(II) RADEON(0): membase=0xe0000000
(II) RADEON(0): CP in BM mode
(II) RADEON(0): Using 8 MB AGP aperture
(II) RADEON(0): Using 1 MB for the ring buffer
(II) RADEON(0): Using 2 MB for vertex/indirect buffers
(II) RADEON(0): Using 5 MB for AGP textures
(II) RADEON(0): Memory manager initialized to (0,0) (672,2156)
(II) RADEON(0): Reserved area from (0,480) to (672,482)
(II) RADEON(0): Largest offscreen area available: 672 x 1674
(II) RADEON(0): Reserved back buffer at offset 0xe02c4000
(II) RADEON(0): Reserved depth buffer at offset 0xe0362000
(II) RADEON(0): Reserved 61440 kb for textures at offset 0xe0400000
(II) RADEON(0): fo=0x05780000 bo=0x05780b10 do=0x05780d88(==) RADEON(0): Backing store
disabled
(==) RADEON(0): Silken mouse enabled
(II) RADEON(0): Using CP based acceleration
(II) RADEON(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
Solid Lines
Dashed Lines
Offscreen Pixmaps
Setting up tile and stipple cache:
32 128x128 slots
8 256x256 slots
(II) RADEON(0): Acceleration enabled
(II) RADEON(0): Using hardware cursor (scanline 964)
(II) RADEON(0): Largest offscreen area available: 672 x 1670
(II) RADEON(0): Dotclock is 0 Mhz, setting ecp_div to 0
(II) RADEON(0): 0x55 0xaa
(II) RADEON(0): No MM_TABLE found(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Reloading /usr/X11R6/lib/modules/libi2c.a
(II) RADEON(0): I2C bus "Radeon multimedia bus" initialized.
(II) RADEON(0): *** 0x85c0040 versus 0x85c0040
(II) RADEON(0): No video input capabilities detected
(II) Loading sub module "theatre"
(II) LoadModule: "theatre"
(II) Loading /usr/X11R6/lib/modules/multimedia/theatre_drv.o
(II) Module theatre: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.5
00:00.0 Host bridge: Intel Corp. 82815 815 Chipset Host Bridge and Memory Controller
Hub (rev 04)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR-
Latency: 0
Region 0: Memory at e8000000 (32-bit, prefetchable) [size=64M]
Capabilities: [88] #09 [e104]
Capabilities: [a0] AGP version 2.0
Status: RQ=31 SBA+ 64bit- FW- Rate=x1,x2
Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>
00:01.0 PCI bridge: Intel Corp.: Unknown device 1131 (rev 04) (prog-if 00 [Normal
decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR+ FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 32
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: fc000000-fdffffff
Prefetchable memory behind bridge: e0000000-e7ffffff
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
00:1e.0 PCI bridge: Intel Corp. 82820 820 (Camino 2) Chipset PCI (-M) (rev 03)
(prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=02, subordinate=10, sec-latency=32
I/O behind bridge: 0000e000-0000ffff
Memory behind bridge: f4000000-fbffffff
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
00:1f.0 ISA bridge: Intel Corp. 82820 820 (Camino 2) Chipset ISA Bridge (ICH2-M) (rev
03)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping-
SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0
00:1f.1 IDE interface: Intel Corp. 82820 820 (Camino 2) Chipset IDE U100 (-M) (rev 03)
(prog-if 80 [Master])
Subsystem: Intel Corp.: Unknown device 4541
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0
Region 4: I/O ports at bfa0 [size=16]
00:1f.2 USB Controller: Intel Corp. 82820 820 (Camino 2) Chipset USB (Hub A) (rev 03)
(prog-if 00 [UHCI])
Subsystem: Intel Corp.: Unknown device 4541
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin D routed to IRQ 10
Region 4: I/O ports at dce0 [size=32]
01:00.0 VGA compatible controller: ATI Technologies Inc Radeon Mobility M6 LW (prog-if
00 [VGA])
Subsystem: Dell Computer Corporation: Unknown device 00e6
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop+ ParErr- Stepping+
SERR+ FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 32 (2000ns min), cache line size 08
Interrupt: pin A routed to IRQ 11
Region 0: Memory at e0000000 (32-bit, prefetchable) [size=128M]
Region 1: I/O ports at cc00 [size=256]
Region 2: Memory at fcff0000 (32-bit, non-prefetchable) [size=64K]
Expansion ROM at 80000000 [disabled] [size=128K]
Capabilities: [58] AGP version 2.0
Status: RQ=47 SBA+ 64bit- FW- Rate=x1,x2
Command: RQ=0 SBA+ AGP- 64bit- FW- Rate=<none>
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
02:03.0 Multimedia audio controller: ESS Technology ES1983S Maestro-3i PCI Audio
Accelerator (rev 10)
Subsystem: Dell Computer Corporation: Unknown device 00e6
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 32 (500ns min, 6000ns max)
Interrupt: pin A routed to IRQ 5
Region 0: I/O ports at ec00 [size=256]
Region 1: Memory at f8ffe000 (32-bit, non-prefetchable) [size=8K]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA
PME(D0-,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
02:06.0 Ethernet controller: 3Com Corporation 3c556 Hurricane CardBus (rev 10)
Subsystem: 3Com Corporation: Unknown device 6456
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 32 (2500ns min, 1250ns max), cache line size 08
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at e800 [size=256]
Region 1: Memory at f8ffdc00 (32-bit, non-prefetchable) [size=128]
Region 2: Memory at f8ffd800 (32-bit, non-prefetchable) [size=128]
Expansion ROM at f9000000 [disabled] [size=128K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=1 PME-
02:06.1 Communication controller: 3Com Corporation: Unknown device 1007 (rev 10)
Subsystem: 3Com Corporation: Unknown device 615b
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 32 (2500ns min, 1250ns max), cache line size 08
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at e400 [size=256]
Region 1: Memory at f8ffd400 (32-bit, non-prefetchable) [size=256]
Region 2: Memory at f8ffd000 (32-bit, non-prefetchable) [size=128]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2+ AuxCurrent=0mA
PME(D0-,D1-,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=1 PME-
02:0f.0 CardBus bridge: Texas Instruments PCI4451 PC card Cardbus Controller
Subsystem: Dell Computer Corporation: Unknown device 00e6
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 168, cache line size 08
Interrupt: pin A routed to IRQ 10
Region 0: Memory at f4000000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=02, secondary=03, subordinate=06, sec-latency=176
Memory window 0: f4400000-f47ff000 (prefetchable)
Memory window 1: f4800000-f4bff000
I/O window 0: 0000e000-0000e0ff
I/O window 1: 0000f000-0000f0ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
02:0f.1 CardBus bridge: Texas Instruments PCI4451 PC card Cardbus Controller
Subsystem: Dell Computer Corporation: Unknown device 00e6
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 168, cache line size 08
Interrupt: pin A routed to IRQ 10
Region 0: Memory at f4001000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=02, secondary=07, subordinate=0a, sec-latency=176
Memory window 0: f4c00000-f4fff000 (prefetchable)
Memory window 1: f5000000-f53ff000
I/O window 0: 0000f400-0000f4ff
I/O window 1: 0000f800-0000f8ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
02:0f.2 FireWire (IEEE 1394): Texas Instruments: Unknown device 8027 (prog-if 10
[OHCI])
Subsystem: Dell Computer Corporation: Unknown device 00e6
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping-
SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 32 (500ns min, 1000ns max), cache line size 08
Interrupt: pin A routed to IRQ 10
Region 0: Memory at f8ffc800 (32-bit, non-prefetchable) [size=2K]
Region 1: Memory at f8ff8000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2+ AuxCurrent=0mA
PME(D0-,D1-,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Linux version 2.4.18-6mdk ([EMAIL PROTECTED]) (gcc version 2.96 20000731
(Mandrake Linux 8.2 2.96-0.76mdk)) #1 Fri Mar 15 02:59:08 CET 2002
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 0000000000100000 - 000000001ffea800 (usable)
BIOS-e820: 000000001ffea800 - 0000000020000000 (reserved)
BIOS-e820: 00000000feea0000 - 00000000fef00000 (reserved)
BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved)
hm, page 1ffea000 reserved twice.
On node 0 totalpages: 131050
zone(0): 4096 pages.
zone(1): 126954 pages.
zone(2): 0 pages.
Dell Inspiron with broken BIOS detected. Refusing to enable the local APIC.
Kernel command line: auto BOOT_IMAGE=linux ro root=307 devfs=mount quiet
Initializing CPU#0
Detected 1196.047 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 2385.51 BogoMIPS
Memory: 513392k/524200k available (1170k kernel code, 10420k reserved, 332k data, 260k
init, 0k highmem)
Dentry-cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes)
Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
CPU: Before vendor init, caps: 0383f9ff 00000000 00000000, vendor = 0
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 512K
CPU: After vendor init, caps: 0383f9ff 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: 0383f9ff 00000000 00000000 00000000
CPU: Common caps: 0383f9ff 00000000 00000000 00000000
CPU: Intel(R) Pentium(R) III Mobile CPU 1200MHz stepping 01
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch ([EMAIL PROTECTED])
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xfc06e, last bus=2
PCI: Using configuration type 1
PCI: Probing PCI hardware
Unknown bridge resource 2: assuming transparent
PCI: Discovered primary peer bus 08 [IRQ]
PCI: Using IRQ router PIIX [8086/244c] at 00:1f.0
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16)
Starting kswapd
VFS: Diskquotas version dquot_6.5.0 initialized
devfs: v1.10 (20020120) Richard Gooch ([EMAIL PROTECTED])
devfs: boot_options: 0x1
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ
SERIAL_PCI ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
block: 128 slots per queue, batch=32
RAMDISK driver initialized: 16 RAM disks of 32000K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller on PCI bus 00 dev f9
PIIX4: chipset revision 3
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xbfa0-0xbfa7, BIOS settings: hda:DMA, hdb:DMA
hda: HITACHI_DK23DA-30, ATA DISK drive
hdb: LG DVD-ROM DRN-8080B, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: 58605120 sectors (30006 MB) w/2048KiB Cache, CHS=3648/255/63, UDMA(100)
hdb: ATAPI 24X DVD-ROM drive, 512kB Cache, DMA
Uniform CD-ROM driver Revision: 3.12
Partition check:
/dev/ide/host0/bus0/target0/lun0: p1 p2 p3 < p5 p6 p7 p8 p9 >
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 32768)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Uncompressing......done.
Freeing initrd memory: 132k freed
VFS: Mounted root (ext2 filesystem).
Mounted devfs on /dev
Journalled Block Device driver loaded
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Freeing unused kernel memory: 260k freed
Real Time Clock Driver v1.10e
EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,7), internal journal
Adding Swap: 522072k swap-space (priority -1)
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,9), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
MSDOS FS: IO charset iso8859-1
MSDOS FS: Using codepage 850
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,8), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
PCI: Found IRQ 10 for device 02:06.0
PCI: Sharing IRQ 10 with 00:1f.2
PCI: Sharing IRQ 10 with 02:06.1
PCI: Sharing IRQ 10 with 02:0f.0
PCI: Sharing IRQ 10 with 02:0f.1
PCI: Sharing IRQ 10 with 02:0f.2
3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
02:06.0: 3Com PCI 3c556 Laptop Tornado at 0xe800. Vers LK1.1.16
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.275 $ time 03:23:39 Mar 15 2002
usb-uhci.c: High bandwidth mode enabled
PCI: Found IRQ 10 for device 00:1f.2
PCI: Sharing IRQ 10 with 02:06.0
PCI: Sharing IRQ 10 with 02:06.1
PCI: Sharing IRQ 10 with 02:0f.0
PCI: Sharing IRQ 10 with 02:0f.1
PCI: Sharing IRQ 10 with 02:0f.2
PCI: Setting latency timer of device 00:1f.2 to 64
usb-uhci.c: USB UHCI at I/O 0xdce0, IRQ 10
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
parport0: irq 7 detected
ip_conntrack (4095 buckets, 32760 max)
IPVS: Connection hash table configured (size=4096, memory=32Kbytes)
IPVS: ipvs loaded.
Linux Kernel Card Services Kernel Version
options: [pci] [cardbus] [pm]
PCI: Found IRQ 10 for device 02:0f.0
PCI: Sharing IRQ 10 with 00:1f.2
PCI: Sharing IRQ 10 with 02:06.0
PCI: Sharing IRQ 10 with 02:06.1
PCI: Sharing IRQ 10 with 02:0f.1
PCI: Sharing IRQ 10 with 02:0f.2
PCI: Found IRQ 10 for device 02:0f.1
PCI: Sharing IRQ 10 with 00:1f.2
PCI: Sharing IRQ 10 with 02:06.0
PCI: Sharing IRQ 10 with 02:06.1
PCI: Sharing IRQ 10 with 02:0f.0
PCI: Sharing IRQ 10 with 02:0f.2
Yenta IRQ list 0298, PCI irq10
Socket status: 30000006
Yenta IRQ list 0298, PCI irq10
Socket status: 30000006
cs: IO port probe 0x0c00-0x0cff: clean.
cs: IO port probe 0x0100-0x04ff: excluding 0x280-0x287 0x378-0x37f 0x4d0-0x4d7
cs: IO port probe 0x0a00-0x0aff: clean.
maestro3: version 1.22 built at 03:23:10 Mar 15 2002
PCI: Found IRQ 5 for device 02:03.0
maestro3: Configuring ESS Maestro3(i) found at IO 0xEC00 IRQ 5
maestro3: subvendor id: 0x00e61028
ac97_codec: AC97 Audio codec, id: 0x8384:0x7609 (SigmaTel STAC9721/23)
eth0: Setting promiscuous mode.
device eth0 entered promiscuous mode
# File generated by XFdrake.
# **********************************************************************
# Refer to the XF86Config(4/5) man page for details about the format of
# this file.
# **********************************************************************
Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Mandrake 6.0 and later now use a font server independent of
# the X server to render fonts.
FontPath "unix/:-1"
EndSection
# **********************************************************************
# Server flags section.
# **********************************************************************
Section "ServerFlags"
# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging
#NoTrapSignals
# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.
#DontZap
# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences. This allows clients to receive these key events.
#DontZoom
# This allows the server to start up even if the
# mouse device can't be opened/initialised.
AllowMouseOpenFail
EndSection
# **********************************************************************
# Input devices
# **********************************************************************
# **********************************************************************
# Keyboard section
# **********************************************************************
Section "Keyboard"
Protocol "Standard"
# when using XQUEUE, comment out the above line, and uncomment the
# following line
#Protocol "Xqueue"
AutoRepeat 250 30
# Let the server do the NumLock processing. This should only be
# required when using pre-R6 clients
#ServerNumLock
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
#Xleds "1 2 3"
#To set the LeftAlt to Meta, RightAlt key to ModeShift,
#RightCtl key to Compose, and ScrollLock key to ModeLock:
LeftAlt Meta
RightAlt Meta
ScrollLock Compose
RightCtl Control
# To disable the XKEYBOARD extension, uncomment XkbDisable.
# XkbDisable
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# XkbModel "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# XkbModel "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# XkbLayout "de"
# or:
# XkbLayout "de"
# XkbVariant "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# XkbOptions "ctrl:swapcaps"
# These are the default XKB settings for XFree86
# XkbRules "xfree86"
# XkbModel "pc101"
# XkbLayout "us"
# XkbVariant ""
# XkbOptions ""
XkbKeycodes "xfree86"
XkbTypes "default"
XkbCompat "default"
XkbSymbols "us(pc105)"
XkbGeometry "pc"
XkbRules "xfree86"
XkbModel "pc105"
XkbLayout "us"
EndSection
# **********************************************************************
# Pointer section
# **********************************************************************
Section "Pointer"
Protocol "PS/2"
Device "/dev/psaux"
# Emulate3Buttons
# Emulate3Timeout 50
# ChordMiddle is an option for some 3-button Logitech mice
# ChordMiddle
EndSection
# **********************************************************************
# Monitor section
# **********************************************************************
# Any number of monitor sections may be present
Section "Monitor"
Identifier "Generic|Monitor that can do 1600x1200 at 70 Hz"
VendorName "Unknown"
ModelName "Unknown"
# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
HorizSync 31.5-88.0
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
VertRefresh 50-120
# Modes can be specified in two formats. A compact one-line format, or
# a multi-line format.
# These two are equivalent
# ModeLine "1024x768i" 45 1024 1048 1208 1264 768 776 784 817 Interlace
# Mode "1024x768i"
# DotClock 45
# HTimings 1024 1048 1208 1264
# VTimings 768 776 784 817
# Flags "Interlace"
# EndMode
ModeLine "1024x480" 65.00 1024 1032 1176 1344 480 488 494 563 -hsync -vsync
ModeLine "768x576" 63.07 768 800 960 1024 576 578 590 616
ModeLine "768x576" 50.00 768 832 846 1000 576 590 595 630
# This is a set of standard mode timings. Modes that are out of monitor spec
# are automatically deleted by the server (provided the HorizSync and
# VertRefresh lines are correct), so there's no immediate need to
# delete mode timings (unless particular mode timings don't work on your
# monitor). With these modes, the best standard mode that your monitor
# and video card can support for a given resolution is automatically
# used.
# 640x400 @ 70 Hz, 31.5 kHz hsync
Modeline "640x400" 25.175 640 664 760 800 400 409 411 450
# 640x480 @ 60 Hz, 31.5 kHz hsync
Modeline "640x480" 25.175 640 664 760 800 480 491 493 525
# 800x600 @ 56 Hz, 35.15 kHz hsync
ModeLine "800x600" 36 800 824 896 1024 600 601 603 625
# 1024x768 @ 87 Hz interlaced, 35.5 kHz hsync
Modeline "1024x768" 44.9 1024 1048 1208 1264 768 776 784 817 Interlace
# 640x400 @ 85 Hz, 37.86 kHz hsync
Modeline "640x400" 31.5 640 672 736 832 400 401 404 445 -HSync +VSync
# 640x480 @ 72 Hz, 36.5 kHz hsync
Modeline "640x480" 31.5 640 680 720 864 480 488 491 521
# 640x480 @ 75 Hz, 37.50 kHz hsync
ModeLine "640x480" 31.5 640 656 720 840 480 481 484 500 -HSync -VSync
# 800x600 @ 60 Hz, 37.8 kHz hsync
Modeline "800x600" 40 800 840 968 1056 600 601 605 628 +hsync +vsync
# 640x480 @ 85 Hz, 43.27 kHz hsync
Modeline "640x480" 36 640 696 752 832 480 481 484 509 -HSync -VSync
# 1152x864 @ 89 Hz interlaced, 44 kHz hsync
ModeLine "1152x864" 65 1152 1168 1384 1480 864 865 875 985 Interlace
# 800x600 @ 72 Hz, 48.0 kHz hsync
Modeline "800x600" 50 800 856 976 1040 600 637 643 666 +hsync +vsync
# 1024x768 @ 60 Hz, 48.4 kHz hsync
Modeline "1024x768" 65 1024 1032 1176 1344 768 771 777 806 -hsync -vsync
# 640x480 @ 100 Hz, 53.01 kHz hsync
Modeline "640x480" 45.8 640 672 768 864 480 488 494 530 -HSync -VSync
# 1152x864 @ 60 Hz, 53.5 kHz hsync
Modeline "1152x864" 89.9 1152 1216 1472 1680 864 868 876 892 -HSync -VSync
# 800x600 @ 85 Hz, 55.84 kHz hsync
Modeline "800x600" 60.75 800 864 928 1088 600 616 621 657 -HSync -VSync
# 1024x768 @ 70 Hz, 56.5 kHz hsync
Modeline "1024x768" 75 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
# 1280x1024 @ 87 Hz interlaced, 51 kHz hsync
Modeline "1280x1024" 80 1280 1296 1512 1568 1024 1025 1037 1165 Interlace
# 800x600 @ 100 Hz, 64.02 kHz hsync
Modeline "800x600" 69.65 800 864 928 1088 600 604 610 640 -HSync -VSync
# 1024x768 @ 76 Hz, 62.5 kHz hsync
Modeline "1024x768" 85 1024 1032 1152 1360 768 784 787 823
# 1152x864 @ 70 Hz, 62.4 kHz hsync
Modeline "1152x864" 92 1152 1208 1368 1474 864 865 875 895
# 1280x1024 @ 61 Hz, 64.2 kHz hsync
Modeline "1280x1024" 110 1280 1328 1512 1712 1024 1025 1028 1054
# 1400x1050 @ 60 Hz, 65.5 kHz
ModeLine "1400x1050" 122.0 1400 1488 1640 1880 1050 1052 1064 1082 +HSync +VSync
# 1024x768 @ 85 Hz, 70.24 kHz hsync
Modeline "1024x768" 98.9 1024 1056 1216 1408 768 782 788 822 -HSync -VSync
# 1152x864 @ 78 Hz, 70.8 kHz hsync
Modeline "1152x864" 110 1152 1240 1324 1552 864 864 876 908
# 1280x1024 @ 70 Hz, 74.59 kHz hsync
Modeline "1280x1024" 126.5 1280 1312 1472 1696 1024 1032 1040 1068 -HSync -VSync
# 1600x1200 @ 60Hz, 75.00 kHz hsync
Modeline "1600x1200" 162 1600 1664 1856 2160 1200 1201 1204 1250 +HSync +VSync
# 1152x864 @ 84 Hz, 76.0 kHz hsync
Modeline "1152x864" 135 1152 1464 1592 1776 864 864 876 908
# 1280x1024 @ 74 Hz, 78.85 kHz hsync
Modeline "1280x1024" 135 1280 1312 1456 1712 1024 1027 1030 1064
# 1024x768 @ 100Hz, 80.21 kHz hsync
Modeline "1024x768" 115.5 1024 1056 1248 1440 768 771 781 802 -HSync -VSync
# 1280x1024 @ 76 Hz, 81.13 kHz hsync
Modeline "1280x1024" 135 1280 1312 1416 1664 1024 1027 1030 1064
# 1400x1050 @ 75 Hz, 82.2 kHz hsync
ModeLine "1400x1050" 155.8 1400 1464 1784 1912 1050 1052 1064 1090 +HSync +VSync
# 1600x1200 @ 70 Hz, 87.50 kHz hsync
Modeline "1600x1200" 189 1600 1664 1856 2160 1200 1201 1204 1250 -HSync -VSync
# 1152x864 @ 100 Hz, 89.62 kHz hsync
Modeline "1152x864" 137.65 1152 1184 1312 1536 864 866 885 902 -HSync -VSync
# 1280x1024 @ 85 Hz, 91.15 kHz hsync
Modeline "1280x1024" 157.5 1280 1344 1504 1728 1024 1025 1028 1072 +HSync +VSync
# 1600x1200 @ 75 Hz, 93.75 kHz hsync
Modeline "1600x1200" 202.5 1600 1664 1856 2160 1200 1201 1204 1250 +HSync +VSync
# 1600x1200 @ 85 Hz, 105.77 kHz hsync
Modeline "1600x1200" 220 1600 1616 1808 2080 1200 1204 1207 1244 +HSync +VSync
# 1600x1200 @ 85 Hz, 106.3 kHz hsync
ModeLine "1600x1200" 229.5 1600 1664 1856 2160 1200 1201 1204 1250 +HSync +VSync
# 1280x1024 @ 100 Hz, 107.16 kHz hsync
Modeline "1280x1024" 181.75 1280 1312 1440 1696 1024 1031 1046 1072 -HSync -VSync
# 1800x1440 @ 64Hz, 96.15 kHz hsync
ModeLine "1800X1440" 230 1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSync
# 1800x1440 @ 70Hz, 104.52 kHz hsync
ModeLine "1800X1440" 250 1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSync
# 1920x1440 @ 60 Hz, 90.0 kHz hsync
ModeLine "1920x1440" 234.0 1920 2048 2256 2600 1440 1441 1444 1500 -HSync +VSync
# 1920x1440 @ 75 Hz, 112.5kHz hsync
ModeLine "1920x1440" 297.0 1920 2064 2288 2640 1440 1441 1444 1500 -HSync +VSync
# 512x384 @ 78 Hz, 31.50 kHz hsync
Modeline "512x384" 20.160 512 528 592 640 384 385 388 404 -HSync -VSync
# 512x384 @ 85 Hz, 34.38 kHz hsync
Modeline "512x384" 22 512 528 592 640 384 385 388 404 -HSync -VSync
# Low-res Doublescan modes
# If your chipset does not support doublescan, you get a 'squashed'
# resolution like 320x400.
# 320x200 @ 70 Hz, 31.5 kHz hsync, 8:5 aspect ratio
Modeline "320x200" 12.588 320 336 384 400 200 204 205 225 Doublescan
# 320x240 @ 60 Hz, 31.5 kHz hsync, 4:3 aspect ratio
Modeline "320x240" 12.588 320 336 384 400 240 245 246 262 Doublescan
# 320x240 @ 72 Hz, 36.5 kHz hsync
Modeline "320x240" 15.750 320 336 384 400 240 244 246 262 Doublescan
# 400x300 @ 56 Hz, 35.2 kHz hsync, 4:3 aspect ratio
ModeLine "400x300" 18 400 416 448 512 300 301 302 312 Doublescan
# 400x300 @ 60 Hz, 37.8 kHz hsync
Modeline "400x300" 20 400 416 480 528 300 301 303 314 Doublescan
# 400x300 @ 72 Hz, 48.0 kHz hsync
Modeline "400x300" 25 400 424 488 520 300 319 322 333 Doublescan
# 480x300 @ 56 Hz, 35.2 kHz hsync, 8:5 aspect ratio
ModeLine "480x300" 21.656 480 496 536 616 300 301 302 312 Doublescan
# 480x300 @ 60 Hz, 37.8 kHz hsync
Modeline "480x300" 23.890 480 496 576 632 300 301 303 314 Doublescan
# 480x300 @ 63 Hz, 39.6 kHz hsync
Modeline "480x300" 25 480 496 576 632 300 301 303 314 Doublescan
# 480x300 @ 72 Hz, 48.0 kHz hsync
Modeline "480x300" 29.952 480 504 584 624 300 319 322 333 Doublescan
# This is a set of extended mode timings typically used for laptop,
# TV fullscreen mode or DVD fullscreen output.
# These are available along with standard mode timings.
# Sony Vaio C1(X,XS,VE,VN)?
# 1024x480 @ 85.6 Hz, 48 kHz hsync
ModeLine "1024x480" 65.00 1024 1032 1176 1344 480 488 494 563 -hsync -vsync
# 768x576 @ 79 Hz, 50 kHz hsync
ModeLine "768x576" 50.00 768 832 846 1000 576 590 595 630
# 768x576 @ 100 Hz, 61.6 kHz hsync
ModeLine "768x576" 63.07 768 800 960 1024 576 578 590 616
EndSection
# **********************************************************************
# Graphics device section
# **********************************************************************
Section "Device"
Identifier "Generic VGA"
Chipset "generic"
EndSection
Section "Device"
Identifier "ATI Radeon"
VendorName "ATI"
BoardName "Unknown"
Chipset "radeon"
# VideoRam 65536
# Clock lines
# Uncomment following option if you see a big white block
# instead of the cursor!
# Option "sw_cursor"
Option "power_saver"
Driver "ati"
Option "AGPMode" "1"
EndSection
# **********************************************************************
# Screen sections
# **********************************************************************
# The Colour SVGA server
Section "Screen"
Driver "svga"
Device "Generic VGA"
Monitor "Generic|Monitor that can do 1600x1200 at 70 Hz"
Subsection "Display"
Depth 8
Modes "320x200"
ViewPort 0 0
EndSubsection
EndSection
Section "Screen"
Driver "vga16"
Device "Generic VGA"
Monitor "Generic|Monitor that can do 1600x1200 at 70 Hz"
Subsection "Display"
Modes "640x480" "800x600"
ViewPort 0 0
EndSubsection
EndSection
Section "Screen"
Driver "vga2"
Device "Generic VGA"
Monitor "Generic|Monitor that can do 1600x1200 at 70 Hz"
Subsection "Display"
Modes "640x480" "800x600"
ViewPort 0 0
EndSubsection
EndSection
Section "Screen"
Driver "accel"
Device "ATI Radeon"
Monitor "Generic|Monitor that can do 1600x1200 at 70 Hz"
DefaultColorDepth 16
Subsection "Display"
Depth 8
Modes "640x400"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 15
Modes "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 16
Modes "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 24
Modes "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 32
Modes "640x480"
ViewPort 0 0
EndSubsection
EndSection
Section "Screen"
Driver "radeon"
Device "ATI Radeon"
Monitor "Generic|Monitor that can do 1600x1200 at 70 Hz"
DefaultColorDepth 16
Subsection "Display"
Depth 8
Modes "default"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 15
Modes "default"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 16
Modes "default"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 24
Modes "default"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 32
Modes "default"
ViewPort 0 0
EndSubsection
EndSection
Section "Module"
Load "glx"
Load "dri"
EndSection
Section "DRI"
Mode 0666
EndSection
