Michael, I posted a small patch for this sometime back. Here is a web cvs link to the log. Looks like 1.69 or later of this file is needed.
http://cvsweb.xfree86.org/cvsweb/xc/programs/Xserver/hw/xfree86/drivers/i810 /i810_driver.c -Matt -----Original Message----- From: Michael Cardenas [mailto:[EMAIL PROTECTED]] Sent: Friday, August 02, 2002 6:48 PM To: [EMAIL PROTECTED] Subject: [Xpert]dri on the intel i810 Hello everyone. If you respond, please cc me as I'm not subscribed. Attach: /root/XFree86.0.log.fail xfree86 log I'm an engineer at Lindows.com and we're trying to ship xfree86 4.2.0 with our next release. In testing, our qa dept discovered that the intel i810 card no longer has dri acceleration since moving from 4.1.0 to 4.2.0. I found that we were not using the updated kernel modules required for dri, so I added those to our kernel. Unfortunately, the i810's are still not accelerated. From looking at /var/log/XFree86.0.log, everything seems to be fine, and it says "direct rendering enabled", but glxinfo says "direct rendering: no". I'm trying really hard to debug this problem and any suggestions as to what the problem is, or how to debug it, would be greatly appreciated. Attached are the output of glxinfo and xfree8.0.log. thank you, michael -- michael cardenas lead software engineer lindows.com . hyperpoem.net . "Be the change you want to see in the world." -Mahatma Gandhi _______________________________________________ Xpert mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xpert
