I'm not subscribed so please cc me if you can assist, or have suggestions?
I'm having trouble getting my touchscreen to work correctly;
As I touch further to right, the touch gets more innacurate!
(placement is progressively further off from touch (2 inches off on right side of screen!)
(lower left accurate, but that's about the only place)
Entered calibration results from DOS, but makes no difference.
Running
Slackware 8.1
XFree86 4.2.0
elographics_drv loads, and screen is functional, but getting an error in XF86.0.log
(**) |-->Input Device "touchscreen1"
Not at the specified rate or model 2310, will continue
(--) Elographics touchscreen is a Intellitouch, connected through a serial link.
(--) The controller is a model E281-2310, firmware revision 1.1.
(--) Additional features:
(--) External A/D converter
(--) Z Axis active
To verify HW was working properly I tested w/ Windows 2000, and it works normally.
Thanks in advance to anyone who may be able to assist.
-Tony
