http://www.pvv.org/~kim That is me, sitting at my 6 head system in Linux. It is working thanks to this mailing list.
So, I wonder if somebody can recommend improvements to my config file, supplied below. F.ex. I would like to have 3d, even though it is not accelerated. Perhaps Mesa? The startup process is somewhat messy and buggy, with 2 boots and 4 startx every time. It is thus: 1. "startx" Machine hangs, and must be rebooted with "ctrl+Alt+Del". Error: "(EE) MGA(3): No valid modes found" 2. "startx" X stops. Error: "(EE) MGA(3): MGAValidateMode from HALlib found the mode to be invalid. Error: b1901020 Fatal server error: AddScreen/ScreenInit failed for driver 3" 3. "startx" X stops. Error: "(WW) MGA(5): Failed to set up write-combining range (0xdb800000,0x800000) (EE) MGA(5): MGAValidateMode from HALlib found the mode to be invalid. Error: b1901020 Fatal server error: AddScreen/ScreenInit failed for driver 5" 4. "startx" And X finally starts, and works as it should, stable. Kim0 # ********************************************************************** # Refer to the XF86Config(4/5) man page for details about the format of # this file. # ********************************************************************** Section "Files" RgbPath "/usr/X11R6/lib/X11/rgb" ModulePath "/usr/X11R6/lib/modules" FontPath "/usr/X11R6/lib/X11/fonts/misc/" FontPath "/usr/X11R6/lib/X11/fonts/Speedo/" FontPath "/usr/X11R6/lib/X11/fonts/Type1/" FontPath "/usr/X11R6/lib/X11/fonts/CID/" FontPath "/usr/X11R6/lib/X11/fonts/75dpi/" FontPath "/usr/X11R6/lib/X11/fonts/100dpi/" EndSection # ********************************************************************** # Server flags section. # ********************************************************************** Section "ServerFlags" # Uncomment this to cause a core dump at the spot where a signal is # received. This may leave the console in an unusable state, but # may # provide a better stack trace in the core dump to aid in debugging #NoTrapSignals # Uncomment this to disable the <crtl><alt><bs> server abort # sequence # This allows clients to receive this key event. #DontZap # Uncomment this to disable the <crtl><alt><kp_ +="">/<kp_-> mode # switching # sequences. This allows clients to receive these key events. #DontZoom # This allows the server to start up even if the # mouse device can't be opened/initialised. AllowMouseOpenFail EndSection # ********************************************************************** # Input devices # ********************************************************************** # ********************************************************************** # Keyboard section # ********************************************************************** Section "InputDevice" Identifier "Keyboard1" Driver "Keyboard" Option "AutoRepeat" "250 30" Option "XkbRules" "xfree86" Option "XkbModel" "pc105" Option "XkbLayout" "no" EndSection # ********************************************************************** # Pointer section # ********************************************************************** #Section "InputDevice" # Identifier "Mouse2" # Driver "mouse" # Option "Protocol" "PS/2" # Option "Device" "/dev/usbmouse" # Option "Emulate3Buttons" # Option "Emulate3Timeout" "50" #EndSection Section "InputDevice" Identifier "Mouse1" Driver "mouse" Option "Protocol" "PS/2" Option "Device" "/dev/psaux" Option "Emulate3Buttons" Option "Emulate3Timeout" "50" EndSection Section "Module" # This loads the DBE extension module. # Load "dbe" # This loads the miscellaneous extensions module, and disables # initialisation of the XFree86-DGA extension within that module. SubSection "extmod" Option "omit xfree86-dga" EndSubSection # This loads the Type1 and FreeType font modules Load "type1" Load "freetype" EndSection # ********************************************************************** # Monitor section # ********************************************************************** # Any number of monitor sections may be present Section "Monitor" Identifier "Generic|High Frequency SVGA, 1024x768 at 70 Hz" VendorName "Unknown" ModelName "Unknown" # HorizSync is in kHz unless units are specified. # HorizSync may be a comma separated list of discrete values, or a # comma separated list of ranges of values. # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S # USER MANUAL FOR THE CORRECT NUMBERS. HorizSync 31.5-87.0 # VertRefresh is in Hz unless units are specified. # VertRefresh may be a comma separated list of discrete values, or a # comma separated list of ranges of values. # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S # USER MANUAL FOR THE CORRECT NUMBERS. VertRefresh 74-76 EndSection Section "Monitor" Identifier "hp_A2094A" VendorName "Hewlett Packard" ModelName "A2094A" HorizSync 73.0-75.0 VertRefresh 70-72 Modeline "1280x1024" 123 1280 1336 1472 1648 1024 1024 1027 1051 EndSection Section "Monitor" Identifier "hp_A1097C" VendorName "Hewlett Packard" ModelName "A1097C" HorizSync 31.5 - 87.0 VertRefresh 50.0 - 90.0 ModeLine "hurk" 122 1280 1360 1504 1664 960 960 963 1023 ModeLine "hp1280x960" 122 1280 1360 1432 1664 960 960 963 1029 EndSection Section "Monitor" Identifier "qhp_A1097C" VendorName "Hewlett Packard" ModelName "A1097C" HorizSync 31.5 - 87.0 VertRefresh 50.0 - 90.0 ModeLine "hurk" 122 1280 1360 1504 1664 960 960 963 1023 ModeLine "hp1280x960" 121.570 1280 1360 1432 1664 960 960 963 1029 EndSection # ********************************************************************** # Graphics device section # ********************************************************************** Section "Device" Identifier "Generic VGA" Driver "vga" EndSection Section "Device" Identifier "G450_1" VendorName "" BoardName "" Driver "mga" # Clock lines # Uncomment following option if you see a big white block # instead of the cursor! # Option "sw_cursor" Option "NoAccel" "Yes" BusID "PCI:1:0:0" Screen 0 EndSection Section "Device" Identifier "G450_2" VendorName "" BoardName "" Driver "mga" Option "NoAccel" "Yes" BusID "PCI:1:0:0" Screen 1 EndSection Section "Device" Identifier "G450_3" VendorName "" BoardName "" Driver "mga" Option "NoAccel" "Yes" BusID "PCI:2:0:0" Screen 0 EndSection Section "Device" Identifier "G450_4" VendorName "" BoardName "" Driver "mga" Option "NoAccel" "Yes" BusID "PCI:2:0:0" Screen 1 EndSection Section "Device" Identifier "G450_5" VendorName "" BoardName "" Driver "mga" Option "NoAccel" "Yes" BusID "PCI:3:0:0" Screen 0 EndSection Section "Device" Identifier "G450_6" VendorName "" BoardName "" Driver "mga" Option "NoAccel" "Yes" BusID "PCI:3:0:0" Screen 1 EndSection # ********************************************************************** # Screen sections # ********************************************************************** Section "Screen" Identifier "screen1" Device "G450_1" # Monitor "hp_A2094A" Monitor "Generic|High Frequency SVGA, 1024x768 at 70 Hz" DefaultColorDepth 24 Subsection "Display" Depth 8 Modes "1280x1024" "1024x768" "800x600" "640x480" ViewPort 0 0 EndSubsection Subsection "Display" Depth 15 Modes "1280x1024" "1024x768" "800x600" "640x480" ViewPort 0 0 EndSubsection Subsection "Display" Depth 16 Modes "1280x1024" "1024x768" "800x600" "640x480" ViewPort 0 0 EndSubsection Subsection "Display" Depth 24 Modes "1280x1024" "1024x768" "800x600" "640x480" ViewPort 0 0 EndSubsection Subsection "Display" Depth 32 Modes "1280x1024" "1024x768" "800x600" "640x480" ViewPort 0 0 EndSubsection EndSection Section "Screen" Identifier "screen2" Device "G450_2" Monitor "hp_A2094A" # Monitor "Generic|High Frequency SVGA, 1024x768 at 70 Hz" DefaultColorDepth 24 Subsection "Display" Depth 8 Modes "1280x1024" "1024x768" "800x600" "640x480" ViewPort 0 0 EndSubsection Subsection "Display" Depth 15 Modes "1280x1024" "1024x768" "800x600" "640x480" ViewPort 0 0 EndSubsection Subsection "Display" Depth 16 Modes "1280x1024" "1024x768" "800x600" "640x480" ViewPort 0 0 EndSubsection Subsection "Display" Depth 24 Modes "1280x1024" "1024x768" "800x600" "640x480" ViewPort 0 0 EndSubsection Subsection "Display" Depth 32 Modes "1280x1024" "1024x768" "800x600" "640x480" ViewPort 0 0 EndSubsection EndSection Section "Screen" Identifier "screen3" Device "G450_3" Monitor "hp_A1097C" DefaultColorDepth 24 Subsection "Display" Depth 8 Modes "hp1280x960" ViewPort 0 0 EndSubsection Subsection "Display" Depth 15 Modes "hp1280x960" ViewPort 0 0 EndSubsection Subsection "Display" Depth 16 Modes "hp1280x960" ViewPort 0 0 EndSubsection Subsection "Display" Depth 24 Modes "hp1280x960" ViewPort 0 0 EndSubsection Subsection "Display" Depth 32 Modes "hp1280x960" ViewPort 0 0 EndSubsection EndSection Section "Screen" Identifier "screen4" Device "G450_4" # Monitor "hp_A2094A" Monitor "Generic|High Frequency SVGA, 1024x768 at 70 Hz" DefaultColorDepth 24 Subsection "Display" Depth 8 Modes "1280x1024" "1024x768" "800x600" "640x480" ViewPort 0 0 EndSubsection Subsection "Display" Depth 15 Modes "1280x1024" "1024x768" "800x600" "640x480" ViewPort 0 0 EndSubsection Subsection "Display" Depth 16 Modes "1280x1024" "1024x768" "800x600" "640x480" ViewPort 0 0 EndSubsection Subsection "Display" Depth 24 Modes "1280x1024" "1024x768" "800x600" "640x480" ViewPort 0 0 EndSubsection Subsection "Display" Depth 32 Modes "1280x1024" "1024x768" "800x600" "640x480" ViewPort 0 0 EndSubsection EndSection Section "Screen" Identifier "screen5" Device "G450_5" Monitor "qhp_A1097C" DefaultColorDepth 24 Subsection "Display" Depth 8 # Modes "hurk" Modes "hp1280x960" ViewPort 0 0 EndSubsection Subsection "Display" Depth 15 # Modes "hurk" Modes "hp1280x960" ViewPort 0 0 EndSubsection Subsection "Display" Depth 16 # Modes "hurk" Modes "hp1280x960" ViewPort 0 0 EndSubsection Subsection "Display" Depth 24 # Modes "hurk" Modes "hp1280x960" ViewPort 0 0 EndSubsection Subsection "Display" Depth 32 # Modes "hurk" Modes "hp1280x960" ViewPort 0 0 EndSubsection EndSection Section "Screen" Identifier "screen6" Device "G450_6" Monitor "hp_A1097C" # Monitor "qhp_A1097C" DefaultColorDepth 24 Subsection "Display" Depth 8 # Modes "hurk" Modes "hp1280x960" ViewPort 0 0 EndSubsection Subsection "Display" Depth 15 # Modes "hurk" Modes "hp1280x960" ViewPort 0 0 EndSubsection Subsection "Display" Depth 16 # Modes "hurk" Modes "hp1280x960" ViewPort 0 0 EndSubsection Subsection "Display" Depth 24 # Modes "hurk" Modes "hp1280x960" ViewPort 0 0 EndSubsection Subsection "Display" Depth 32 # Modes "hurk" Modes "hp1280x960" ViewPort 0 0 EndSubsection EndSection # 6 5 3 # 2 1 4 Section "ServerLayout" Identifier "layout1" Screen "screen1" Screen "screen2" LeftOf "screen1" Screen "screen3" Above "screen4" Screen "screen4" RightOf "screen1" Screen "screen5" Above "screen1" Screen "screen6" Above "screen2" Option "Xinerama" InputDevice "Mouse1" "CorePointer" #InputDevice "Mouse2" "SendCoreEvents" InputDevice "Keyboard1" "CoreKeyboard" EndSection _______________________________________________ Xpert mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xpert