On Fri, Oct 11, 2002 at 05:25:50PM +0200, Alexander Stohr wrote: >> >> Option "DPMS" >> >> BusID "PCI:0:11:0" >> >>EndSection >> >> >> >>Section "Device" >> >> Identifier "device1" >> >> VendorName "ATI" >> >> BoardName "ATI Radeon" >> >> Driver "radeon" >> >> Option "DPMS" >> >> Option "AGPMode" "2" >> >> BusID "AGP:1:0:0" >> > >> > ^^^^^^^^^ >> > Not sure this works either, but it probably doesn't matter >> as this is >> > the primary device. >> >> What do you mean by 'not sure this works'? Are you referring to the >> AGP? The radeon card is agp, the rage card is pci. The agp >> entry works >> fine as a single head entry. > >AGP is an extension to the PCI specification. >Therefore you get even AGP slots listed when running "lspci". > >I know that PCI:1.0.0 is working on specific machines >and it nicely selects the AGP board. I have never seen >that you can replace "PCI" by "AGP". Maybe it just works >because your AGP display adapter is setup as the only >remainder and therefore your section just applys.
XFree86 treats "AGP" and "PCI" the same in a BusID string. I figured it was inevitable that someone would try "AGP:x:y:z". David _______________________________________________ Xpert mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xpert