Now I had included some lines of the files XF86Config.new and XFree86.0.log
I will like to participate and contribute for this project. Thanks for the help provided. This is the configuration file XF86Config.new: Section "ServerLayout" Identifier "XFree86 Configured" Screen 0 "Screen0" 0 0 InputDevice "Mouse0" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard" EndSection Section "Files" RgbPath "/usr/X11R6/lib/X11/rgb" ModulePath "/usr/X11R6/lib/modules" FontPath "/usr/X11R6/lib/X11/fonts/misc/" FontPath "/usr/X11R6/lib/X11/fonts/Speedo/" FontPath "/usr/X11R6/lib/X11/fonts/Type1/" FontPath "/usr/X11R6/lib/X11/fonts/CID/" FontPath "/usr/X11R6/lib/X11/fonts/75dpi/" FontPath "/usr/X11R6/lib/X11/fonts/100dpi/" EndSection Section "Module" Load "extmod" Load "glx" Load "dri" Load "dbe" Load "record" Load "xtrap" Load "speedo" Load "type1" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "keyboard" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psm0" EndSection Section "Monitor" #DisplaySize 280 210 # mm Identifier "Monitor0" VendorName "IBM" ModelName "IBM E54" Option "DPMS" EndSection Section "Device" ### Available Driver options are:- ### Values: <i>: integer, <f>: float, <bool>: "True"/"False", ### <string>: "String", <freq>: "<f> Hz/kHz/MHz" ### [arg]: arg optional #Option "NoAccel" # [<bool>] #Option "SWcursor" # [<bool>] #Option "ColorKey" # <i> #Option "CacheLines" # <i> #Option "Dac6Bit" # [<bool>] Option "DRI" "false" # [<bool>] #Option "NoDDC" # [<bool>] #Option "XvMCSurfaces" # <i> Identifier "Card0" Driver "i810" VendorName "Intel Corp." BoardName "82845G/GL [Brookdale-G] Chipset Integrated Graphics Device" BusID "PCI:0:2:0" EndSection Section "Screen" Identifier "Screen0" Device "Card0" Monitor "Monitor0" DefaultDepth 16 SubSection "Display" Depth 8 Modes "640x480" EndSubSection SubSection "Display" Depth 15 EndSubSection SubSection "Display" Depth 16 Modes "640x480" EndSubSection SubSection "Display" Depth 24 EndSubSection EndSection Those are some lines from XF86.0.log file: XFree86 Version 4.2.99.2 / X Window System (protocol Version 11, revision 0, vendor release 6600) Release Date: 21 October 2002 Build Operating System: FreeBSD 4.7-RELEASE i386 [ELF] ... (==) Log file: "/var/log/XFree86.0.log", Time: Wed Oct 30 10:22:36 2002 ... (**) ModulePath set to "/usr/X11R6/lib/modules" (--) Using syscons driver with X support (version 2.0) (--) using VT number 9 ... (II) PCI-to-ISA bridge: (II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set) (--) PCI:*(0:2:0) Intel Corp. 82845G/GL [Brookdale-G] Chipset Integrated Graphics Device rev 1, Mem @ 0x88000000/27, 0x80000000/19 ... (II) LoadModule: "i810" (II) Loading /usr/X11R6/lib/modules/drivers/i810_drv.o (II) Module i810: vendor="The XFree86 Project" compiled for 4.2.99.2, module version = 1.1.0 Module class: XFree86 Video Driver ABI class: XFree86 Video Driver, version 0.6 ... (II) I810: Driver for Intel i810 chipset: i810, i810-dc100, i810e, i815, i830M, 845G (II) Primary Device is: PCI 00:02:0 (--) Chipset 845G found ... (II) Setting vga for screen 0. (II) Loading sub module "int10" (II) LoadModule: "int10" (II) Loading /usr/X11R6/lib/modules/libint10.a (II) Module int10: vendor="The XFree86 Project" compiled for 4.2.99.2, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.6 ... (II) LoadModule: "vgahw" (II) Loading /usr/X11R6/lib/modules/libvgahw.a (II) Module vgahw: vendor="The XFree86 Project" compiled for 4.2.99.2, module version = 0.1.0 ABI class: XFree86 Video Driver, version 0.6 (**) I810(0): Depth 16, (--) framebuffer bpp 16 (==) I810(0): RGB weight 565 (==) I810(0): Default visual is TrueColor (**) I810(0): Option "DRI" "false" (II) Loading sub module "int10" (II) LoadModule: "int10" (II) Reloading /usr/X11R6/lib/modules/libint10.a (II) I810(0): initializing int10 (==) I810(0): Write-combining range (0xa0000,0x20000) was already clear (==) I810(0): Write-combining range (0xc0000,0x40000) (WW) I810(0): Bad V_BIOS checksum (II) I810(0): Primary V_BIOS segment is: 0xc000 (==) I810(0): Write-combining range (0x0,0x1000) was already clear (II) I810(0): VESA BIOS detected (II) I810(0): VESA VBE Version 3.0 (II) I810(0): VESA VBE Total Mem: 8000 kB (II) I810(0): VESA VBE OEM: Brookdale-G Graphics Chip Accelerated VGA BIOS (II) I810(0): VESA VBE OEM Software Rev: 1.0 (II) I810(0): VESA VBE OEM Vendor: Intel Corporation (II) I810(0): VESA VBE OEM Product: Brookdale-G Graphics Controller (II) I810(0): VESA VBE OEM Product Rev: Hardware Version 0.0 (--) I810(0): Chipset: "845G" (--) I810(0): Linear framebuffer at 0x88000000 (--) I810(0): IO registers at addr 0x80000000 (II) I810(0): detected 8060K stolen memory. (II) I810(0): I830CheckAvailableMemory: 98304k available (--) I810(0): Pre-allocated VideoRAM: 8060 kByte (==) I810(0): VideoRAM: 8192 kByte (==) I810(0): video overlay key set to 0x83e (--) I810(0): Maximum frambuffer space: 8108 kByte (==) I810(0): Using gamma correction (1.0, 1.0, 1.0) (II) I810(0): Currently active displays on Pipe A: (II) I810(0): CRT (II) I810(0): No active displays on Pipe B. ... (II) Loading sub module "ddc" (II) LoadModule: "ddc" (II) Loading /usr/X11R6/lib/modules/libddc.a (II) Module ddc: vendor="The XFree86 Project" compiled for 4.2.99.2, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.6 (II) I810(0): VESA VBE DDC supported (II) I810(0): VESA VBE DDC Level 2 (II) I810(0): VESA VBE DDC transfer in appr. 1 sec. (II) I810(0): VESA VBE DDC read successfully (II) I810(0): Manufacturer: IBM Model: 18bb Serial#: 16843009 (II) I810(0): Year: 2002 Week: 21 (II) I810(0): EDID Version: 1.1 (II) I810(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V (II) I810(0): Sync: Separate (II) I810(0): Max H-Image Size [cm]: horiz.: 28 vert.: 21 (II) I810(0): Gamma: 1.94 (II) I810(0): DPMS capabilities: Off; RGB/Color Display (II) I810(0): redX: 0.600 redY: 0.340 greenX: 0.280 greenY: 0.595 (II) I810(0): blueX: 0.150 blueY: 0.063 whiteX: 0.283 whiteY: 0.298 (II) I810(0): Supported VESA Video Modes: (II) I810(0): 720x400@70Hz (II) I810(0): 640x480@60Hz (II) I810(0): 640x480@75Hz (II) I810(0): 800x600@72Hz (II) I810(0): 800x600@75Hz (II) I810(0): 1024x768@60Hz (II) I810(0): 1024x768@70Hz (II) I810(0): 1024x768@75Hz (II) I810(0): Manufacturer's mask: 0 (II) I810(0): Supported Future Video Modes: (II) I810(0): #0: hsize: 640 vsize 480 refresh: 85 vid: 22833 (II) I810(0): #1: hsize: 800 vsize 600 refresh: 85 vid: 22853 (II) I810(0): #2: hsize: 1024 vsize 768 refresh: 85 vid: 22881 (II) I810(0): #3: hsize: 1280 vsize 1024 refresh: 60 vid: 32897 (II) I810(0): Supported additional Video Mode: (II) I810(0): clock: 56.2 MHz Image Size: 267 x 200 mm (II) I810(0): h_active: 800 h_sync: 832 h_sync_end 896 h_blank_end 1048 h_border: 0 (II) I810(0): v_active: 600 v_sync: 601 v_sync_end 604 v_blanking: 631 v_border: 0 (II) I810(0): Monitor name: IBM E54 (II) I810(0): Ranges: V min: 50 V max: 120 Hz, H min: 30 H max: 69 kHz, PixClock max 110 MHz (II) I810(0): Serial No: 55-BWP47 (II) I810(0): Will use BIOS call 0x5f05 to set non-default refresh rates. (II) I810(0): Will use BIOS call 0x5f64 to enable displays. ... (--) I810(0): Maximum space available for video modes: 8000 Kbyte (WW) I810(0): Monitor0: Using default hsync range of 30.00-69.00kHz (WW) I810(0): Monitor0: using default vrefresh range of 50.00-120.00Hz (--) I810(0): Virtual size is 1920x1440 (pitch 1920) (**) I810(0): *Built-in mode "640x480" (**) I810(0): Built-in mode "1920x1440" (**) I810(0): Built-in mode "1600x1200" (**) I810(0): Built-in mode "1280x1024" (**) I810(0): Built-in mode "1024x768" (**) I810(0): Built-in mode "800x600" (II) I810(0): Attempting to use 85Hz refresh for mode "640x480" (41) ... (II) I810(0): Attempting to use 60Hz refresh for mode "1280x1024" (49) (II) I810(0): Attempting to use 85Hz refresh for mode "1024x768" (45) (II) I810(0): Attempting to use 85Hz refresh for mode "800x600" (43) (--) I810(0): Display dimensions: (280, 210) mm (--) I810(0): DPI set to (174, 174) ... (II) Loading sub module "ramdac" (II) LoadModule: "ramdac" (II) Loading /usr/X11R6/lib/modules/libramdac.a (II) Module ramdac: vendor="The XFree86 Project" compiled for 4.2.99.2, module version = 0.1.0 ABI class: XFree86 Video Driver, version 0.6 (==) I810(0): Write-combining range (0x0,0x1000) was already clear (II) do I need RAC? No, I don't. ... (II) Loading sub module "int10" (II) LoadModule: "int10" (II) Reloading /usr/X11R6/lib/modules/libint10.a (II) I810(0): initializing int10 (==) I810(0): Write-combining range (0xa0000,0x20000) was already clear (WW) I810(0): Bad V_BIOS checksum (II) I810(0): Primary V_BIOS segment is: 0xc000 (==) I810(0): Write-combining range (0x0,0x1000) was already clear (II) I810(0): VESA BIOS detected (II) I810(0): VESA VBE Version 3.0 (II) I810(0): VESA VBE Total Mem: 8000 kB (II) I810(0): VESA VBE OEM: Brookdale-G Graphics Chip Accelerated VGA BIOS (II) I810(0): VESA VBE OEM Software Rev: 1.0 (II) I810(0): VESA VBE OEM Vendor: Intel Corporation (II) I810(0): VESA VBE OEM Product: Brookdale-G Graphics Controller (II) I810(0): VESA VBE OEM Product Rev: Hardware Version 0.0 (==) I810(0): Default visual is TrueColor (II) I810(0): Allocated 64 kB for the ring buffer at 0x0 (II) I810(0): Allocating at least 384 scanlines for pixmap cache (II) I810(0): Initial framebuffer allocation size: 6840 kByte (II) I810(0): Allocated 4 kB for HW cursor at 0x7fff000 (II) I810(0): Allocated 4 kB for Overlay registers at 0x7ffe000 (0x02cef000). (II) I810(0): Allocated 64 kB for the scratch buffer at 0x7fee000 (II) I810(0): Updated framebuffer allocation size from 6840 to 7680 kByte (II) I810(0): Updated pixmap cache from 384 scanlines to 608 scanlines (II) I810(0): 0x87508e8: Memory at offset 0x00010000, size 7680 kBytes (II) I810(0): 0x8750908: Memory at offset 0x07fff000, size 4 kBytes (II) I810(0): 0x875092c: Memory at offset 0x00000000, size 64 kBytes (II) I810(0): 0x875095c: Memory at offset 0x07fee000, size 64 kBytes (II) I810(0): 0x875097c: Memory at offset 0x07ffe000, size 4 kBytes (==) I810(0): Write-combining range (0x80000000,0x80000) was already clear (==) I810(0): Write-combining range (0x88000000,0x8000000) (II) I810(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000 (==) I810(0): Write-combining range (0xa0000,0x10000) was already clear (WW) I810(0): PGTBL_ER is 0x00000049 (II) I810(0): Display plane A is enabled. (II) I810(0): Display plane B is disabled. (II) I810(0): PIPEACONF is 0x80000000 (II) I810(0): Using XFree86 Acceleration Architecture (XAA) Screen to screen bit blits Solid filled rectangles 8x8 mono pattern filled rectangles Indirect CPU to Screen color expansion Solid Horizontal and Vertical Lines Offscreen Pixmaps Setting up tile and stipple cache: 32 128x128 slots 7 256x256 slots (==) I810(0): Backing store disabled (==) I810(0): Silken mouse enabled (II) I810(0): Initializing HW Cursor (**) Option "dpms" (**) I810(0): DPMS enabled (II) I810(0): direct rendering: Disabled ... (**) Option "Protocol" "auto" (**) Mouse0: Protocol: "auto" (**) Option "CorePointer" (**) Mouse0: Core Pointer (**) Option "Device" "/dev/psm0" (**) Mouse0: Emulate3Buttons, Emulate3Timeout: 50 (==) Mouse0: Buttons: 3 (II) Keyboard "Keyboard0" handled by legacy driver (II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE) (II) Mouse0: SetupAuto: hw.iftype is 3, hw.model is 0 (II) Mouse0: SetupAuto: protocol is SysMouse (WW) fcntl(8, O_ASYNC): Inappropriate ioctl for device (WW) I810(0): Setting the original video mode instead of restoring the saved state (WW) I810(0): PGTBL_ER is 0x00000049 (II) I810(0): Display plane A is enabled. (II) I810(0): Display plane B is disabled. (II) I810(0): PIPEACONF is 0x80000000 (WW) fcntl(8, O_ASYNC): Inappropriate ioctl for device (WW) I810(0): Setting the original video mode instead of restoring the saved state _______________________________________________ Xpert mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xpert