Hi, I've seen quite a number of posts about external display problems recently and I've been trying to apply the solutions to my system (a Vaio laptop with a i830 chipset) but had no luck so far.
What I'm trying to do is display to an external monitor at a higher frequency than 60Hz. I've tried to force the refresh rate by fixing the value of the VertRefresh option to 75 but it doesn't change anything. The X log tells me that it does detect a 1024x768@75Hz mode and it apparently also tells me that it's using a 85Hz (!) refresh rate, but my external monitor still tells me 60Hz (and my eyes confirm). See below for bits of the concerned files. I'm wondering what the source of the problem is: is this a i830-specific problem (or even a vaio-specific one), a X problem, or is it just me? Any help would be very much appreciated! Gabriel. ---------------------------------------- XF86Config [...] Section "Monitor" Identifier "Vaio LCD" HorizSync 28.0-49.0 VertRefresh 75 Option "DPMS" EndSection [...] ---------------------------------------- XFree86.0.log [...] (II) I810(0): Currently active displays on Pipe A: (II) I810(0): CRT (II) I810(0): LFP (Local Flat Panel) child device [...] (II) I810(0): Supported VESA Video Modes: (II) I810(0): 640x480@60Hz (II) I810(0): 640x480@67Hz (II) I810(0): 640x480@72Hz (II) I810(0): 640x480@75Hz (II) I810(0): 800x600@56Hz (II) I810(0): 800x600@60Hz (II) I810(0): 800x600@72Hz (II) I810(0): 800x600@75Hz (II) I810(0): 832x624@75Hz (II) I810(0): 1024x768@60Hz (II) I810(0): 1024x768@70Hz (II) I810(0): 1024x768@75Hz (II) I810(0): 1280x1024@75Hz (II) I810(0): 1152x870@75Hz (II) I810(0): Manufacturer's mask: 0 (II) I810(0): Supported Future Video Modes: (II) I810(0): #0: hsize: 640 vsize 480 refresh: 70 vid: 18993 (II) I810(0): #1: hsize: 832 vsize 624 refresh: 75 vid: 20297 (II) I810(0): #2: hsize: 1600 vsize 1200 refresh: 60 vid: 16553 (II) I810(0): #3: hsize: 1280 vsize 1024 refresh: 75 vid: 36737 (II) I810(0): #4: hsize: 1024 vsize 768 refresh: 85 vid: 22881 (II) I810(0): (II) I810(0): (II) I810(0): (II) I810(0): (==) I810(0): DPI set to (75, 75) (WW) I810(0): Pitch is bigger than local/stolen size. Defaulting to original display width (--) I810(0): Virtual size is 1024x768 (pitch 1024) (**) I810(0): Default mode "1024x768": 94.5 MHz (scaled from 0.0 MHz), 68.7 kHz, 85.0 Hz (II) I810(0): Modeline "1024x768" 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync [...] _______________________________________________ Xpert mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xpert