The Xorg.0.log trimmed
X Window System Version 1.3.0
Release Date: 19 April 2007
X Protocol Version 11, Revision 0, Release 1.3
Build Operating System: SunOS 5.11 snv_75 i86pc
Current Operating System: SunOS ogle 5.11 snv_81 i86pc
Build Date: 07 January 2008
Solaris ABI: 64-bit
SUNWxorg-server package version: 6.9.0.5.11.8100,REV=0.2008.01.08
SUNWxorg-graphics-ddx package version: 6.9.0.5.11.8100,REV=0.2008.01.08
SUNWxorg-mesa package version: 6.9.0.5.11.8100,REV=0.2008.01.08
Before reporting problems, check http://sunsolve.sun.com/
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue Mar 11 16:30:11 2008
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) |-->Screen "Screen1" (1)
(**) | |-->Monitor "Monitor1"
(**) | |-->Device "Card1"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(**) FontPath set to:
/usr/X11/lib/X11/fonts/TrueType/,
/usr/X11/lib/X11/fonts/Type1/,
/usr/X11/lib/X11/fonts/Type1/sun/,
/usr/X11/lib/X11/fonts/F3bitmaps/,
/usr/X11/lib/X11/fonts/misc/,
/usr/X11/lib/X11/fonts/100dpi/,
/usr/X11/lib/X11/fonts/75dpi/
(**) RgbPath set to "/usr/X11/lib/X11/rgb"
(**) ModulePath set to "/usr/X11/lib/modules/amd64"
(II) Loader magic: 60f0c0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.3
X.Org Video Driver: 1.2
X.Org XInput driver : 0.7
X.Org Server Extension : 0.3
X.Org Font Renderer : 0.5
(II) Loader running on solaris
(II) LoadModule: "pcidata"
(II) Loading /usr/X11/lib/modules/amd64//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 1.2
(II) PCI: 01:00:0: chip 10de,0622 card 10de,0545 rev a1 class 03,00,00 hdr 00
(II) PCI: 04:05:0: chip 10de,0221 card 3842,b399 rev a1 class 03,00,00 hdr 00
(--) PCI: (1:0:0) nVidia Corporation unknown chipset (0x0622) rev 161, Mem @
0xfa000000/24, 0xc0000000/28, 0xf8000000/25, I/O @ 0xb800/7, BIOS @
0xfbd80000/19
(--) PCI:*(4:5:0) nVidia Corporation NV44A [GeForce 6200] rev 161, Mem @
0xfd000000/24, 0xd0000000/28, 0xfc000000/24, BIOS @ 0xfebe0000/17
(II) NVIDIA dlloader X Driver 171.06 Wed Feb 20 10:33:20 PST 2008
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(II) Primary Device is: PCI 04:05:0
(--) Chipset NVIDIA GPU found
(--) Chipset NVIDIA GPU found
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11/lib/modules/amd64//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module "wfb"
(II) LoadModule: "wfb"
(II) Loading /usr/X11/lib/modules/amd64//libwfb.so
(II) Module wfb: vendor="NVIDIA Corporation"
compiled for 7.1.99.2, module version = 1.0.0
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"(II) Module "ramdac" already built-in
(II) resource ranges after xf86ClaimFixedResources() call:
(II) Setting vga for screen 0.
(II) Setting vga for screen 1.
(++) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Enabling RENDER acceleration
(II) NVIDIA(GPU-0): No display devices connected; falling back to: CRT-0
(WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
(II) NVIDIA(0): NVIDIA GPU GeForce 6200 (NV44) at PCI:4:5:0 (GPU-0)
(--) NVIDIA(0): Memory: 262144 kBytes
(--) NVIDIA(0): VideoBIOS: 05.44.a2.10.09
(--) NVIDIA(0): Interlaced video modes are supported on this GPU
(--) NVIDIA(0): Connected display device(s) on GeForce 6200 at PCI:4:5:0:
(--) NVIDIA(0): CRT-0
(--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
(II) NVIDIA(0): Assigned Display Device: CRT-0
(==) NVIDIA(0):
(==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
(==) NVIDIA(0): will be used as the requested mode.
(==) NVIDIA(0):
(II) NVIDIA(0): Validated modes:
(II) NVIDIA(0): "nvidia-auto-select"
(II) NVIDIA(0): Virtual screen size determined to be 640 x 480
(WW) NVIDIA(0): Unable to get display device CRT-0's EDID; cannot compute DPI
(WW) NVIDIA(0): from CRT-0's EDID.
(==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
(==) NVIDIA(0): Disabling 32-bit ARGB GLX visuals.
(++) NVIDIA(1): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(1): RGB weight 888
(==) NVIDIA(1): Default visual is TrueColor
(==) NVIDIA(1): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(1): Enabling RENDER acceleration
(II) NVIDIA(1): NVIDIA GPU GeForce 9600 GT (G94) at PCI:1:0:0 (GPU-1)
(--) NVIDIA(1): Memory: 524288 kBytes
(--) NVIDIA(1): VideoBIOS: 62.94.0d.00.03
(II) NVIDIA(1): Detected PCI Express Link width: 16X
(--) NVIDIA(1): Interlaced video modes are supported on this GPU
(--) NVIDIA(1): Connected display device(s) on GeForce 9600 GT at PCI:1:0:0:
(--) NVIDIA(1): SAMSUNG (DFP-1)
(--) NVIDIA(1): SAMSUNG (DFP-1): 165.0 MHz maximum pixel clock
(--) NVIDIA(1): SAMSUNG (DFP-1): Internal Single Link TMDS
(WW) NVIDIA(1): The EDID for SAMSUNG (DFP-1) contradicts itself: mode
(WW) NVIDIA(1): "1920x1080" is specified in the EDID; however, the EDID's
(WW) NVIDIA(1): valid HorizSync range (30.000-68.000 kHz) would exclude
(WW) NVIDIA(1): this mode's HorizSync (27.0 kHz); ignoring HorizSync check
(WW) NVIDIA(1): for mode "1920x1080".
(WW) NVIDIA(1): The EDID for SAMSUNG (DFP-1) contradicts itself: mode
(WW) NVIDIA(1): "1920x1080" is specified in the EDID; however, the EDID's
(WW) NVIDIA(1): valid VertRefresh range (59.000-61.000 Hz) would exclude
(WW) NVIDIA(1): this mode's VertRefresh (24.0 Hz); ignoring VertRefresh
(WW) NVIDIA(1): check for mode "1920x1080".
(WW) NVIDIA(1): The EDID for SAMSUNG (DFP-1) contradicts itself: mode
(WW) NVIDIA(1): "1920x1080" is specified in the EDID; however, the EDID's
(WW) NVIDIA(1): valid VertRefresh range (59.000-61.000 Hz) would exclude
(WW) NVIDIA(1): this mode's VertRefresh (30.0 Hz); ignoring VertRefresh
(WW) NVIDIA(1): check for mode "1920x1080".
(WW) NVIDIA(1): The EDID for SAMSUNG (DFP-1) contradicts itself: mode
(WW) NVIDIA(1): "1920x1080" is specified in the EDID; however, the EDID's
(WW) NVIDIA(1): valid HorizSync range (30.000-68.000 kHz) would exclude
(WW) NVIDIA(1): this mode's HorizSync (27.0 kHz); ignoring HorizSync check
(WW) NVIDIA(1): for mode "1920x1080".
(WW) NVIDIA(1): The EDID for SAMSUNG (DFP-1) contradicts itself: mode
(WW) NVIDIA(1): "1920x1080" is specified in the EDID; however, the EDID's
(WW) NVIDIA(1): valid VertRefresh range (59.000-61.000 Hz) would exclude
(WW) NVIDIA(1): this mode's VertRefresh (24.0 Hz); ignoring VertRefresh
(WW) NVIDIA(1): check for mode "1920x1080".
(WW) NVIDIA(1): The EDID for SAMSUNG (DFP-1) contradicts itself: mode
(WW) NVIDIA(1): "1920x1080" is specified in the EDID; however, the EDID's
(WW) NVIDIA(1): valid VertRefresh range (59.000-61.000 Hz) would exclude
(WW) NVIDIA(1): this mode's VertRefresh (30.0 Hz); ignoring VertRefresh
(WW) NVIDIA(1): check for mode "1920x1080".
(II) NVIDIA(1): Assigned Display Device: DFP-1
(==) NVIDIA(1):
(==) NVIDIA(1): No modes were requested; the default mode "nvidia-auto-select"
(==) NVIDIA(1): will be used as the requested mode.
(==) NVIDIA(1):
(II) NVIDIA(1): Validated modes:
(II) NVIDIA(1): "nvidia-auto-select"
(II) NVIDIA(1): Virtual screen size determined to be 1920 x 1080
(--) NVIDIA(1): DPI set to (304, 304); computed from "UseEdidDpi" X config
(--) NVIDIA(1): option
(==) NVIDIA(1): Disabling 32-bit ARGB GLX visuals.
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? Yes, I do.
(II) NVIDIA(0): Initialized GPU GART.
(II) NVIDIA(0): Setting mode "nvidia-auto-select"
(II) NVIDIA(0): Built-in logo is bigger than the screen.
(II) Loading extension NV-GLX
(II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
(II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse disabled
(II) Loading extension NV-CONTROL
(==) RandR enabled
(II) NVIDIA(1): Initialized GPU GART.
(II) NVIDIA(1): Setting mode "nvidia-auto-select"
(II) NVIDIA(1): NVIDIA 3D Acceleration Architecture Initialized
(II) NVIDIA(1): Using the NVIDIA 2D acceleration architecture
(==) NVIDIA(1): Backing store disabled
(==) NVIDIA(1): Silken mouse disabled
(==) RandR enabled
(II) Setting vga for screen 0.
(II) Setting vga for screen 1.
Screen 0 is using RAC for mem
Screen 0 is using RAC for io
Screen 1 is using RAC for mem
Screen 1 is using RAC for io
(II) Screen 0 shares mem & io resources
(II) Screen 1 shares mem & io resources
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension XAccessControlExtension
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(II) Initializing built-in extension LGE
(II) Initializing extension GLX
(**) Option "Protocol" "auto"
(II) Mouse0: Setting Device option to "/dev/mouse"
(**) Mouse0: Protocol: VUID
(**) Option "CorePointer"
(**) Mouse0: Core Pointer
(**) Option "Device" "/dev/mouse"
(II) Mouse0: Setting Buttons option to "3"
(==) Mouse0: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5 6 7"
(**) Mouse0: ZAxisMapping: buttons 4, 5, 6 and 7
(**) Mouse0: Buttons: 11
(**) Option "CoreKeyboard"
(**) Keyboard0: Core Keyboard
(II) Keyboard0: Opened device "/dev/kbd"
(--) Keyboard0: Keyboard type: USB (6)
(--) Keyboard0: Keyboard layout: 33
(--) XKB: model: "sun_type6_usb"
(--) XKB: layout: "us"
(--) Keyboard0: XkbModel = sun_type6_usb
(--) Keyboard0: XkbLayout = us
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard0: XkbRules: "xorg"
(**) Option "XkbModel" "sun_type6_usb"
(**) Keyboard0: XkbModel: "sun_type6_usb"
(**) Option "XkbLayout" "us"
(**) Keyboard0: XkbLayout: "us"
(**) Option "CustomKeycodes" "off"
(**) Keyboard0: CustomKeycodes disabled
(II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
(II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
This message posted from opensolaris.org
