Thanks, however the qt now only provide qt4.3.1, I wonder if the qt4.3.1 will still compatible with YADE?
>===== Original Message From "Kien Dang, Mr" <[EMAIL PROTECTED]> ===== >HI, > >The same problem happened to me when I install YADE on my dual CPU 64 bit with Kubuntu 7.04. It maybe caused by the missing of QGLviewer library. What I did to sovle that problem were: > >1. Compile qt package with OPENGL option enable. I dont know why the OpenGL option was disable when we compile qt in the 64bit CPU. >2. Download a new version of QGLViewer from its website. Read its install file and install manually by run command make inside the QGLViewer directory of what you downloaded. >3. Install YADE > >It should work now. > >Goold luck > >Kien Dang > >________________________________ > >From: [EMAIL PROTECTED] on behalf of Feng, Chen >Sent: Fri 9/28/2007 12:39 AM >To: [email protected] >Subject: [Yade-users] Install YADE on-64bit CentOS 5 > > > >Hi, all: > >I am working on installation of YADE-0.11.1 on a dual CPU 64bit dell machine >but facing some problems of scons basic check, the error message is shown >below: > >[EMAIL PROTECTED] yade-0.11.1]$ scons PREFIX=/home/fchen/YADE optimize=1 >scons: Reading SConscript files ... >Yade version is `0.11.1', installed files will be suffixed with `-0.11.1'. >All intermediary files will be in `/home/fchen/downloads/build-0.11.1'. >Checking whether c++ compiler "g++" works...yes >Checking for pthread_exit(NULL) in C library pthread... yes >Checking for glutGetModifiers() in C library glut... yes >Checking for boost::posix_time::time_duration::time_duration() in C++ library >boost_date_time-mt... no >Checking for boost::posix_time::time_duration::time_duration() in C++ library >boost_date_time... yes >Checking for boost::thread::thread() in C++ library boost_thread-mt... no >Checking for boost::thread::thread() in C++ library boost_thread... yes >Checking for boost::filesystem::path() in C++ library boost_filesystem-mt... >no >Checking for boost::filesystem::path() in C++ library boost_filesystem... yes >Checking for qt-mt in /usr/share/qt3... no >Checking for qt-mt in /usr/lib/qt... no >Checking for qt-mt in /usr/qt/3... no >Checking for qt-mt in /usr/lib/qt-3.3... no >Checking for QGLViewer(1) in C++ library QGLViewer... no >Checking for QGLViewer(1) in C++ library 3dviewer... no > >One of the essential libraries above was not found, unable to continue. > >Check `/home/fchen/downloads/build-0.11.1/config.log' for possible causes, >note that there are options that you may need to customize: > > PREFIX: /home/fchen/YADE [/usr/local] (Install path prefix) >runtimePREFIX: /home/fchen/YADE [$PREFIX] (Runtime path prefix; DO NOT USE, >inteded for packaging only.) > variant: [] (Build variant, will be suffixed to all files, along with >version (beware: if PREFIX is the same, headers of the older version will >still be overwritten) > debug: True [1] (Enable debugging information and disable optimizations >(yes|no)) > profile: False [0] (Enable profiling information (yes|no)) > optimize: True [0] (Turn on heavy optimizations (generates SSE2 >instructions) (yes|no)) > exclude: [none] (Yade components that will not be built > (all|none|comma-separated list of names) > allowed names: gui extra common dem fem lattice mass-spring >realtime-rigidbody) > features: log4cxx python [python,log4cxx] (Optional features that are turned >on > (all|none|comma-separated list of names) > allowed names: python log4cxx dummy) > jobs: 4 [4] (Number of jobs to run at the same time (same as -j, but >saved)) >extraModules: None [None] (Extra directories with their own SConscript files >(must be in-tree) (whitespace separated)) >buildPrefix: .. [..] (Where to create build-[version][variant] directory >for intermediary files) > version: 0.11.1 [None] (Yade version (if not specified, guess will be >attempted)) > CPPPATH: /home/fchen/downloads/build-0.11.1/include/yade-0.11.1 >/home/fchen/downloads/build-0.11.1/include/yade-0.11.1/yade/lib-miniWm3 >/usr/share/qt3/include /usr/lib/qt/include /usr/qt/3/include >/usr/lib/qt-3.3/include /usr/lib/qt-3.3/include [None] (Additional paths for >the C preprocessor (whitespace separated)) > LIBPATH: /usr/lib/qt-3.3/lib /usr/share/qt3/lib /usr/lib/qt/lib >/usr/qt/3/lib /usr/lib/qt-3.3/lib /usr/lib/qt-3.3/lib [None] (Additional paths >for the linker (whitespace separated)) > QTDIR: /usr/lib/qt-3.3 [['/usr/share/qt3', '/usr/lib/qt', '/usr/qt/3', >'/usr/lib/qt-3.3']] (Directories where to look for qt3) > CXX: g++ [g++] (The c++ compiler) > CXXFLAGS: [None] (Additional compiler flags; you can use them for >tuning like -march=pentium4.) > pretty: True [1] (Don't show compiler command line (like the Linux >kernel) (yes|no)) >useMiniWm3: True [1] (use local miniWm3 library instead of Wm3Foundation >(yes|no)) > > >//--------------------------------------------------------------------------- - > >It seems that the biggest problem is that scons cannot find my qt-mt and >QGLViewer, but it is cleat that qt-mt is in folder /usr/lib/qt-3.3/lib and >QGLViewer is in folder /usr/lib/ and /usr/include > >Did I messed anything up? > >Thanks a lot! > >With best regards, > >Feng, Chen >__________________________________________________ >Graduate Student >Department of Civil and Environmental Engineering >University of Tennessee, Knoxville > >(865) 974-4835 (Office) >__________________________________________________ > >_______________________________________________ >Yade-users mailing list >[email protected] >https://lists.berlios.de/mailman/listinfo/yade-users > > >_______________________________________________ >Yade-users mailing list >[email protected] >https://lists.berlios.de/mailman/listinfo/yade-users With best regards, Feng, Chen __________________________________________________ Graduate Student Department of Civil and Environmental Engineering University of Tennessee, Knoxville (865) 974-4835 (Office) __________________________________________________ _______________________________________________ Yade-users mailing list [email protected] https://lists.berlios.de/mailman/listinfo/yade-users
