Hello - We have several G5s running YDL in a server room. I would like to be able to turn them on and off remotely as the server room usually cannot be entered. Turning them off remotely is fairly easy but turning them back on is the tricky part as they do not seem to support BOOT-ON-LAN. I found power strips that can be controlled via Ethernet but I cannot figure out how to configure the G5s so they power up when (re-)connected to power.
I read that there is a way to change the settings using the Mac O/S but not via nvram (auto-boot). The biggest problem is that these are re-furbished G5s with YDL installed on them and there was no Mac O/S media that came with them. Has anybody been able to set up their G5 Xserve to power on upon power connection using nvram? Thanks! Joe
_______________________________________________ yellowdog-general mailing list [email protected] http://lists.fixstars.com/mailman/listinfo/yellowdog-general HINT: to Google archives, try '<keywords> site:us.fixstars.com'
