Hi,
I am a new user for YDL-5.0 and I have installed ydl-5.0 in my MAC machine.
After installation I have typed "fdisk /dev/sda" command to see the partition
information. It does not given any information. I have pasted the output below
----------------------------------------------------
[EMAIL PROTECTED] fdisk /dev/sda
Device contains neither a valid DOS partition table, nor Sun, SGI or OSF
disklab
el
Building a new DOS disklabel. Changes will remain in memory only,
until you decide to write them. After that, of course, the previous
content won't be recoverable.
The number of cylinders for this disk is set to 19929.
There is nothing wrong with that, but this is larger than 1024,
and could in certain setups cause problems with:
1) software that runs at boot time (e.g., old versions of LILO)
2) booting and partitioning software from other OSs
(e.g., DOS FDISK, OS/2 FDISK)
Warning: invalid flag 0x0000 of partition table 4 will be corrected by w(rite)
Command (m for help): p
Disk /dev/sda: 163.9 GB, 163928604672 bytes
255 heads, 63 sectors/track, 19929 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
Command (m for help):
-------------------------------------------------
If anyone know the reason why fdisk is not giving proper information in
YDL=5.0 please reply.
Thanks & Regards
Naren.
---------------------------------
Looking for people who are YOUR TYPE? Find them here._______________________________________________
yellowdog-general mailing list
[email protected]
http://lists.terrasoftsolutions.com/mailman/listinfo/yellowdog-general
HINT: to Google archives, try '<keywords> site:terrasoftsolutions.com'
