I got the ext2sfx and managed to mount the Linux volume (partition).
However it didn't show up at boot (via alt key).
I noticed a mysterious volume (partition) adjacent to the Linux partition; it couldn't mount. The disk utility couldn't fix it either.
IOKit Name: untitled
Device: disk0s4
Connection Bus: ATA
Connection Type: Internal
Ejectable: No
DVD/CD-ROM: No
Mount Point: Not Mounted
Writable: Yes
Filesystem: Unknown
Volume UUID:
Device Size: 4.00 KB (4,096 bytes)
Device Block Size: 512 bytes
I suspect this should have been the Apple boot disk. The Linux volume (partition) appears to be okay. I'll work on it: try to re-install the Apple boot-disk partition.
Ric.
On Mar 17, 2005, at 6:06 PM, Ray wrote:
I think what happened is that your NVRAM was reset. To start up from Linux:
1. Start up and hold the [option] key.
2. From the boot drives shown, select your Linux drive.
3. Click the right arrow button on the screen.
4. Welcome to Linux!
To mount the Linux hard drive in Mac OS X, install a piece of software called Mac OS X Ext2 Filesystem (<x-tad-smaller>http://sourceforge.net/projects/ext2fsx/). Keep in mind, however, that you will only be able to read and write things on that partition that [insert your Mac OS X short user name here] has access to (ie, those files that specifically allow your short user name to edit themselves).</x-tad-smaller>
On Mar 17, 2005, at 11:09 AM, Derick Centeno wrote:
Is a possible that this is a problem of terms? Creating a 1MG boot partition is different than creating and using a separate 1MG drive. This is splitting hairs (partititions really) but when you are working alone the concepts and the terms matter. Did you make sure that all the other partitions are viable and seen by pdisk while you were within the install process and BEFORE you selected whatever packages you wanted installed by anaconda?_______________________________________________
pdisk should be able to see not only the Apple boot partition but the partitions and mount points of all the drives you have! If not, then it will be a matter of tracking down why they are not seen.
Everything should show up by using: pdisk -l
(as in the letter "l", not the number 1),
Best wishes...
On Mar 17, 2005, at 11:49 AM, Frederick C.Lee wrote:
Based on the Installation Program, all that was needed were 3 disks since I'm stalling the basic desktop system (vs server, etc.)._______________________________________________
The following describes my machine:
<x-tad-smaller>
Machine Model: Power Mac G4
CPU Type: PowerPC G4 (2.9)
Number Of CPUs: 1
CPU Speed: 467 MHz
L2 Cache (per CPU): 1 MB
Memory: 512 MB
Bus Speed: 133 MHz
Boot ROM Version: 4.2.8f1
</x-tad-smaller>
The YDL version is: 4.0.1.
The Installation program appeared to be satisfied after the 3rd disk and did an auto-boot. The rest is history.
My question is: perhaps the Mac didn't see the 1 MB Apple Boot drive that was supposed to have been created during the installation process. Or perhaps such a boot HD wasn't created.
How would I know and, are there other logical explanations?
I the meantime, I guess I have to start all over again.
Ric.
On Mar 17, 2005, at 8:23 AM, Derick Centeno wrote:
According to what I've read regarding YDL 4.0 you need all FOUR (4) discs for installation, not 3. If you are using YDL 3.0 instead which does use only 3 disks for installation, that would explain a lot of your difficulty._______________________________________________
However, YDL 3.0 is perfectly fine for Old World systems, but OS X may not work well on systems slower than 500MHz (the speed at which most Old World systems operate).
Best wishes...
On Mar 17, 2005, at 10:54 AM, Frederick C.Lee wrote:
Greetings:
I have multiple hard drives, one is HFS+ (w/out journaling) split between Jaguar and YDL. The YDL partition has about 20 GB. I've ran thru the YDL manual-installation process and was sure to create a 1 MB Apple boot drive and set the target HD at the root '/' directory per instructions. I did the custom install of options and used the first 3 disk for installation.
At the end, the installer said 'congrats' and rebooted. What I got was the default Jaguar boot (the second partition).
The result:
1) The Linux (YDL) HD is not visible on the desktop; nor can I see it under the System Profiler.
2) The Disk Utility does see the YDL disk as a generic disk with the name 'disk0s3'; *** Not Mounted ***.
Question: How can I make the YDL disk mountable and selectable; and hence BOOTABLE at startup?
Regards,
Ric.
_______________________________________________
yellowdog-newbie mailing list
[email protected]
http://lists.terrasoftsolutions.com/mailman/listinfo/yellowdog-newbie
_______________________________________________
yellowdog-newbie mailing list
[email protected]
http://lists.terrasoftsolutions.com/mailman/listinfo/yellowdog-newbie
yellowdog-newbie mailing list
[email protected]
http://lists.terrasoftsolutions.com/mailman/listinfo/yellowdog-newbie
yellowdog-newbie mailing list
[email protected]
http://lists.terrasoftsolutions.com/mailman/listinfo/yellowdog-newbie
yellowdog-newbie mailing list
[email protected]
http://lists.terrasoftsolutions.com/mailman/listinfo/yellowdog-newbie
_______________________________________________ yellowdog-newbie mailing list [email protected] http://lists.terrasoftsolutions.com/mailman/listinfo/yellowdog-newbie
