Hi, I'm running YDL 4.0 on a Beige G3 minitower with built in ATI Rage II 3D card 288M of ram with a 233Mhz processor and a Rev.1 Mobo. My question is this.. I have a Radeon 700 PCI card installed (it is a flashed pc card with a vga out) and I have been completely unsuccessful in booting YDL 4 from it. I had YDL 3 installed for a while and it booted fine from BootX using the kernel arg video=radeon:vmode:15:cmode:16. I switched to YDL 4 because of some sound problems with YDL 3. The sound is cleared up now but I can't get the Radeon card to boot at all.....no kernel arg i've tried seems to work including the no video option. The card shows up on boot from onboard video as well as in my XF86Config file. Is there anything I can do to get this card working? I'd really like to use it as it is a much better card than the onboard and hardware acceleration worked fine in YDL 3. Thanks for any help you can offer! _______________________________________________ yellowdog-newbie mailing list [email protected] http://lists.terrasoftsolutions.com/mailman/listinfo/yellowdog-newbie
