I've been following a couple somewhat-related e-mail chains on the list here about some difficulties others are having with the firewire connectivity and YDL 4.1. However, I'm about to add my quandry to the list...
I've downloaded the ISOs for YDL 4.1, and boot into the installer using the "install firewire" option. However, no matter what I try, when I get to Anaconda, it never sees the firewire drive that I have connected to the computer, just the two internal disks. It's a G4 dual 450 (Gigabit Ethernet), Firewire drive is a SanDisk 60GB, connecting through the built-in firewire ports on the Mac. One suspicion I have is that I've done the whole media check routine, and although disks #2-4 check out fine, disk #1 results in a fail. I re-download the image, do an MD5 check successfully, but it still results in a fail after burning and booting. I've downloaded, checked and burned disk #1 several times, each time resulting in a failed mediacheck. Could this be the cause of the problem with installing to Firewire? Thanks in advance for any help... -Jason -- Jason Christiansen [EMAIL PROTECTED] "You can't say civilization isn't advancing; in every war they kill you in a new way." --Will Rogers
_______________________________________________ yellowdog-newbie mailing list [email protected] http://lists.terrasoftsolutions.com/mailman/listinfo/yellowdog-newbie
