On Jul 26, 2006, at 9:23 AM, Jason DeVita wrote:
//
[6] Reboot and pray. Upon rebooting, you'll get the normal choice
of cdrom, osx, or linux. After you choose linux, yaboot will give
you a prompt (only for a couple seconds -- so be ready, or else it
will boot the old kernel). Type "myhairisonfire" (or whatever name
you chose) at the prompt and you will boot the new kernel. If
things go bad, you can return to the old kernel by rebooting.
=====================================
Well, hopefully I haven't made any mistakes. Report back with any
question or problems! The nice thing about building a kernel for
the first time is that it is a win-win situation. Either
everything will work just fine, or you'll get to learn a lot about
how linux works!
-J
Jason
Ignore my previous message. Everything compiled properly and the
subsequent steps went without any problem. Only when I try to boot my
newly-compiled kernel, I get the following mesage
Please wait, loading kernel...
/[EMAIL PROTECTED]/[EMAIL PROTECTED]/[EMAIL PROTECTED]:6,/boot/vmlinux-2.6.17.7: No such file
or directory
(The original kernel boots normally.)
Any ideas?
Again, many thanks for your detailed howto.
Regards,
Ebrahim
_______________________________________________
yellowdog-newbie mailing list
[email protected]
http://lists.terrasoftsolutions.com/mailman/listinfo/yellowdog-newbie
