a friend of mine is diving into trying to boot linux on a meta-riscv linux starter kit -- he's not using YP, and this is what he's targeting:
https://www.aliexpress.com/item/1005003751298305.html since i've wanted to jump into meta-riscv for a while, i figured i'd play along and ordered something more substantial: https://www.aliexpress.com/item/1005002796061251.html in any event, here's the story so far. as a first pass, i just fired up YP and built for qemuriscv64 to establish a baseline, and that seems to work just fine, booting with "runqemu nographic." and that at least gives me a bunch of config info i can look at later. as for my actual target board, i know that the meta-riscv layer defines support for two boards, neither of which is the one i will be getting, but while i'm waiting for it, i can at least start documenting all of the relevant settings and config values i'll want to try. i know precious little about meta-riscv, so is there a sane way to prepare for the eventual arrival of my board? my plan is to get familiar with how the meta-riscv layer builds for the two supported boards, so i'll have a handle on what i'll need to configure. any further advice would be most appreciated.
-=-=-=-=-=-=-=-=-=-=-=- Links: You receive all messages sent to this group. View/Reply Online (#56283): https://lists.yoctoproject.org/g/yocto/message/56283 Mute This Topic: https://lists.yoctoproject.org/mt/89391983/21656 Group Owner: yocto+ow...@lists.yoctoproject.org Unsubscribe: https://lists.yoctoproject.org/g/yocto/unsub [arch...@mail-archive.com] -=-=-=-=-=-=-=-=-=-=-=-
