Your first destination should be the log.do_install file in the WORKDIR
of the recipe, which should have the output of the dpkg commands. That
should shed some light on this mystery, hopefully.
Sidenote: DEB files are actually two compressed tar files in a single
archive. If nothing else works, you can extract the tar files with "ar x
$DEBFILE" - the data.tar.* file has the content that you can just copy
to your rootfs (it also has the folder structure prepared). If you pass
the tar.* files in the SRC_URI, even the extraction could be handled by
bitbake. (Assuming that no post-install magic is done by the deb files,
which would be at least unusual for libraries and -dev packages)
On 11.02.25 17:11, R Keith Beal via lists.yoctoproject.org wrote:
> I am working with NXP's Flex-Builder.
> I need to add the libraries and headers for parted.
> On Ubuntu there is a package called libprated-dev I am trying to
> replicate.
> The LAYERSCAPE SDK is using bitbake 1.5.
> I know I probably shouldn't be installing DEBs directly, but, adding
> recipes for libprated and all of its dependencies is beyond the scope
> of the project.
>
> I came-up with this recipe, it reports no errors but the files are not
> installed in the RFS.
>
> SUMMARY = "Development libraries and headers for libparted"
> #SECTION = "console/tools"
> LICENSE="CLOSED"
> LIC_FILES_CHKSUM=""
> SRC_URI = " \
> file://libdevmapper-event1.02.1_1.02.155-3_arm64.deb \
> file://libudev-dev_257.2-3_arm64.deb \
> file://libdevmapper-dev_1.02.201-1_arm64.deb \
> file://libparted-dev_3.6-4+b1_arm64.deb \
> "
> SRCREV = ""
> PV = "0.1.0"
> S = "${WORKDIR}/git"
> DEPENDS = "parted"
> # inherit pkgconfig
> # Install in this order
> # libdevmapper-event1.02.1_1.02.155-3_arm64.deb
> # libudev-dev_257.2-3_arm64.deb
> # libdevmapper-dev_1.02.201-1_arm64.deb
> # libparted-dev_3.6-4+b1_arm64.deb
> do_install() {
> touch ${STAGING_DIR_NATIVE}/var/lib/dpkg/status
> ${STAGING_BINDIR_NATIVE}/dpkg --instdir=${D}/ \
> --admindir=${STAGING_DIR_NATIVE}/var/lib/dpkg/ \
> -i ${WORKDIR}/libdevmapper-event1.02.1_1.02.155-3_arm64.deb
> ${STAGING_BINDIR_NATIVE}/dpkg --instdir=${D}/ \
> --admindir=${STAGING_DIR_NATIVE}/var/lib/dpkg/ \
> -i ${WORKDIR}/libudev-dev_257.2-3_arm64.deb
> ${STAGING_BINDIR_NATIVE}/dpkg --instdir=${D}/ \
> --admindir=${STAGING_DIR_NATIVE}/var/lib/dpkg/ \
> -i ${WORKDIR}/libdevmapper-dev_1.02.201-1_arm64.deb
> ${STAGING_BINDIR_NATIVE}/dpkg --instdir=${D}/ \
> --admindir=${STAGING_DIR_NATIVE}/var/lib/dpkg/ \
> -i ${WORKDIR}/libparted-dev_3.6-4+b1_arm64.deb
> }
>
>
>
>
>
>
-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.
View/Reply Online (#64769): https://lists.yoctoproject.org/g/yocto/message/64769
Mute This Topic: https://lists.yoctoproject.org/mt/111125016/21656
Group Owner: [email protected]
Unsubscribe: https://lists.yoctoproject.org/g/yocto/unsub
[[email protected]]
-=-=-=-=-=-=-=-=-=-=-=-
