So after receiving some great help from Khem on getting my raspberrypi Zero to boot I've been trying to get the wifi up.
I ran into the issue that is where the modules are not being placed into the
image and once that was resolved I now get the wlan0 interface showing up and
I've gotten rid of the IOCTL error in dmesg about the interface not being
available. All good.
So now at the command line I run the command:
>
> $ wpa_supplicant -i wlan0 -c /etc/wpa_supplicant.conf
>
My contents are of the configuration file are (I've removed my SSID and
password for the usual paranoid purposes, Go Flat-Earthers!!):
>
> ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=0
> country=CA
> network={
> ssid="<nope>"
> key_mgmt=WPA-PSK
> psk=<big NOPE!>
> }
>
I've turned up the debug out on the command line and was able to capture the
output to the file debug.out
Now I'm reasonably sure that my credentials are correct to connect to my
network. I've used the raspberry Pi images to verify this and then using the
same credentials.
I've been looking through the various lists of raspberry Pi messages and can't
find any that seem to imply that the wpa_supplicant isn't working although, all
of the working systems appear to be rp 3 & 4.
Any illumination would be appreciated.
Cheers!!
debug.out
Description: Binary data
-=-=-=-=-=-=-=-=-=-=-=- Links: You receive all messages sent to this group. View/Reply Online (#64786): https://lists.yoctoproject.org/g/yocto/message/64786 Mute This Topic: https://lists.yoctoproject.org/mt/111145116/21656 Mute #raspberrypi:https://lists.yoctoproject.org/g/yocto/mutehashtag/raspberrypi Mute #raspberrypi0-wifi:https://lists.yoctoproject.org/g/yocto/mutehashtag/raspberrypi0-wifi Group Owner: [email protected] Unsubscribe: https://lists.yoctoproject.org/g/yocto/unsub [[email protected]] -=-=-=-=-=-=-=-=-=-=-=-
