On Nov 10, 2010, at 7:58 AM, Bruce Ashfield wrote: > On 10-11-10 08:38 AM, Bruce Ashfield wrote: >> On 10-11-10 01:46 AM, Kumar Gala wrote: >>> Why does the meta/conf/machine/mpc8315e-rdb.conf list TARGET_FPU as >>> SPE. This isn't correct for an MPC8313 SoC. >> >> It isn't used at the moment, so we can safely >> ignore this. >> >> It was a hold over from when I initially created >> the BSP, and I've since changed it locally, but >> haven't sent the updated BSP yet. > > To clarify on this point, the kernel configuration > is NOT using SPE for this, and I was attempting to > use the FPU setting to trigger some different gcc > flags during development the base of that test was > an e500 board, so the SPE setting leaked in, but is > unused. > > At the moment, it is actually using soft-float, and > I had planned to submit a change to clarify that. > > If there's another option, let me know and I'll > rebase my patches and change it again.
We should NOT be using soft-float for mpc8315e (it has HW floating point on this chip). Any plans to get an e500 based system going before the rev1.0 release? - k _______________________________________________ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto
