Thanks, Tom. :-) > -----Original Message----- > From: Zanussi, Tom > Sent: Thursday, May 26, 2011 10:43 AM > To: Rifenbark, Scott M; Stewart, David C; yocto@yoctoproject.org > Cc: Zanussi, Tom > Subject: [PATCH 1/1] meta-sugarbay: Change build instructions in README to > use BSP tarball > > From: Tom Zanussi <tom.zanu...@intel.com> > > Change the build instructions to use BSP tarballs instead of git clones. The > git > clone info remains as a mentioned alternative. > > Fixes [YOCTO #1103]. > > Signed-off-by: Tom Zanussi <tom.zanu...@intel.com> > --- > meta-sugarbay/README | 21 ++++++++++++--------- > 1 files changed, 12 insertions(+), 9 deletions(-) > > diff --git a/meta-sugarbay/README b/meta-sugarbay/README index > bcc46c2..7899205 100644 > --- a/meta-sugarbay/README > +++ b/meta-sugarbay/README > @@ -17,17 +17,11 @@ III. Booting the images in /binary I. Building the meta- > sugarbay BSP layer ======================================= > > -For each BSP in the 'meta-intel' repository, there are multiple -branches, > one corresponding to each major release starting with -'laverne' (0.90), in > addition to the latest code which tracks the -current master. > - > In order to build an image with BSP support for a given release, you -need to > check out the 'meta-intel' branch corresponding to the release -you're > building against e.g. to build for laverne (0.90), check out -the 'laverne' > branch of both poky and 'meta-intel'. > +need to download the corresponding BSP tarball from the 'Board Support > +Package (BSP) Downloads' page of the Yocto Project website. > > -Having done that, and assuming you cloned the 'meta-intel' repository > +Having done that, and assuming you extracted the BSP tarball contents > at the top-level of your yocto build tree, you can build a sugarbay image by > adding the location of the meta-sugarbay layer to bblayers.conf e.g.: > @@ -47,6 +41,15 @@ At the end of a successful build, you should have a live > image that you can boot from a USB flash drive (see instructions on how to > do that below, in the section 'Booting the images from /binary'). > > +As an alternative to downloading the BSP tarball, you can also work > +directly from the meta-intel git repository. For each BSP in the > +'meta-intel' repository, there are multiple branches, one corresponding > +to each major release starting with 'laverne' (0.90), in addition to > +the latest code which tracks the current master. Instead of extracting > +a BSP tarball at the top level of your yocto build tree, you can > +equivalently check out the appropriate branch from the meta-intel > +repository at the same location. > + > > II. Booting the images in /binary > ================================= > -- > 1.7.0.4
_______________________________________________ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto
