That is quite the assortment of config bits - are all of these necessary to explicitly support the eg20t? I'd like to see minimal config fragments both for simplicity as well as avoiding unnecessary kernel tool warnings about redefinitions.
-- Darren On 07/10/2011 09:26 AM, tom.zanu...@intel.com wrote: > From: Tom Zanussi <tom.zanu...@intel.com> > > Option group for Intel Platform Controller Hub EG20T (Topcliff). > > Signed-off-by: Tom Zanussi <tom.zanu...@intel.com> > --- > meta/cfg/kernel-cache/features/eg20t/eg20t.cfg | 39 > ++++++++++++++++++++++++ > meta/cfg/kernel-cache/features/eg20t/eg20t.scc | 1 + > 2 files changed, 40 insertions(+), 0 deletions(-) > create mode 100644 meta/cfg/kernel-cache/features/eg20t/eg20t.cfg > create mode 100644 meta/cfg/kernel-cache/features/eg20t/eg20t.scc > > diff --git a/meta/cfg/kernel-cache/features/eg20t/eg20t.cfg > b/meta/cfg/kernel-cache/features/eg20t/eg20t.cfg > new file mode 100644 > index 0000000..225581c > --- /dev/null > +++ b/meta/cfg/kernel-cache/features/eg20t/eg20t.cfg > @@ -0,0 +1,39 @@ > +# Hardware support for the Platform Controller Hub EG20T > + > +CONFIG_PCH_DMA=y > +CONFIG_PCH_UART_DMA=y > +CONFIG_SERIAL_8250_PCI=y > +CONFIG_SERIAL_8250_PCH=y > +CONFIG_SERIAL_8250_PCH_DMA=y > + > +CONFIG_SERIAL_PCH_UART=y > +CONFIG_SERIAL_CORE=y > + > +CONFIG_SPI=y > +CONFIG_SPI_BITBANG=y > +CONFIG_SPI_GPIO=y > +CONFIG_SPI_TOPCLIFF_PCH=y > + > +CONFIG_MISC_DEVICES=y > +CONFIG_PCH_PHUB=y > + > +CONFIG_NETDEVICES=y > +CONFIG_NETDEV_1000=y > +CONFIG_PCH_GBE=y > + > +CONFIG_PCH_USBDEV=y > +CONFIG_USB_GADGET=y > +CONFIG_USB_GADGET_EG20T=y > +CONFIG_USB_GADGET_DUALSPEED=y > +CONFIG_USB_GADGET_SELECTED=y > + > +CONFIG_I2C_EG20T=y > + > +CONFIG_GPIOLIB=y > +CONFIG_GPIO_PCH=y > + > +CONFIG_PCH_IEEE1588=y > + > +CONFIG_CAN=y > +CONFIG_CAN_DEV=y > +CONFIG_PCH_CAN=y > diff --git a/meta/cfg/kernel-cache/features/eg20t/eg20t.scc > b/meta/cfg/kernel-cache/features/eg20t/eg20t.scc > new file mode 100644 > index 0000000..d690469 > --- /dev/null > +++ b/meta/cfg/kernel-cache/features/eg20t/eg20t.scc > @@ -0,0 +1 @@ > +kconf hardware eg20t.cfg -- Darren Hart Intel Open Source Technology Center Yocto Project - Linux Kernel _______________________________________________ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto
