The odd thing is not only is the bzImage file is missing, but also is the whole kernel directory that bzImage is supposed to be locate in.
/home/jim/poky/yocto-build/tmp/sysroots/mymachine/kernel/bzImage In the sysroots/mymachine/ directory there is only: lib/ shlibs/ usr/ Jim A On Tue, Nov 1, 2011 at 3:55 PM, Tom Zanussi <tom.zanu...@intel.com> wrote: > On Tue, 2011-11-01 at 12:48 -0700, James Abernathy wrote: > > Just to clear up the basics, Prior to following Appendix A verbatim, I > > did the following > > 1. install prerequisites from GS guide > > 2. git clone git://git.yoctoproject.org/poky > > 3. cd poky > > 4. git clone git://git.yoctoproject.org/meta-intel.git > > > > I did not install the poky-extras. I assumed it only had to be > > installed if you installed the kernel source for modification like in > > Appendix b > > > > Yeah, normally, assuming you're using an existing kernel branch. But > you didn't get a build error for the kernel, so I'm assuming that's the > case. > > Tom > > > Jim a > > > > > > > > > > On Tue, Nov 1, 2011 at 3:40 PM, Tom Zanussi <tom.zanu...@intel.com> > > wrote: > > Hi, > > > > On Tue, 2011-11-01 at 11:37 -0700, James Abernathy wrote: > > > I tried to duplicate the Yocto Project Decelopment Manual > > Appendix A > > > build of a Crownbay NOEMGD image, no changes just dulicate > > the > > > instructions. This is using the latest Yocto 1.1. I did > > get a long > > > way down the line, but had a fatal error in the last 2 > > steps. > > > > > > The only change I had to make was related to A.5.2.4. The > > commit > > > string for the SRCREV_meta_pn was different on the > > > git.yoctoproject.org/cgit/cgi for the Meta commit so I used > > what I > > > found online. The first section of 126 task completed > > without error. > > > The next section of 4394 tasks failed on 4393. Not sure if > > the error > > > is obvious, but I wanted to run it by someone. Console error > > log > > > below: > > > > > > > > > Hmm, not sure what's going on here - I'm sure this example was > > verified > > several times, but just to make sure, what you're doing is > > going through > > 'Appendix A. BSP Development Example' verbatim and getting > > this? > > > > The SRCREVs in either case look ok for this, so that shouldn't > > be the > > problem... > > > > But let me go over the steps myself and see what I come up > > with - will > > let you know either way... > > > > Tom > > > > > > > NOTE: package core-image-sato-1.0-r0: task do_bootimg: > > Started > > > ERROR: Function 'build_boot_bin' failed > > > > > (see > /home/jim/poky/yocto-build/tmp/work/mymachine-poky-linux/core-image-sato-1.0-r0/temp/log.do_bootimg.31418 > for further information) > > > ERROR: Logfile of failure stored > > > > > in: > /home/jim/poky/yocto-build/tmp/work/mymachine-poky-linux/core-image-sato-1.0-r0/temp/log.do_bootimg.31418 > > > Log data follows: > > > | install: cannot stat > > > > > > `/home/jim/poky/yocto-build/tmp/sysroots/mymachine/kernel/bzImage': No > > > such file or directory > > > | ERROR: Function 'build_boot_bin' failed > > > > > (see > /home/jim/poky/yocto-build/tmp/work/mymachine-poky-linux/core-image-sato-1.0-r0/temp/log.do_bootimg.31418 > for further information) > > > NOTE: package core-image-sato-1.0-r0: task do_bootimg: > > Failed > > > ERROR: Task 9 > > > (/home/jim/poky/meta/recipes-sato/images/core-image-sato.bb, > > > do_bootimg) failed with exit code '1' > > > ERROR: > > '/home/jim/poky/meta/recipes-sato/images/core-image-sato.bb' > > > failed > > > jim@jim-ubuntu-10:~/poky/yocto-build$ > > > > > > > > > > > > > >
_______________________________________________ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto